Examining the feasibility of a "top-down" approach to enhancing the keratinocyte-implant adhesion.

The adhesion of human epidermal keratinocytes to the implant surface is one of the most critical steps during the patient's recovery from implantation of transcutaneous prosthesis. To improve the success rate of transcutaneous prosthetic implants, we explored a new "top-down" approach to promoting this dynamic adhering process through modulation of upstream cell signaling pathways. To examine the feasibility of this novel approach, we first established an in vitro platform that is capable of providing a non-invasive, real-time, quantitative characterization of the keratinocyte-implant interaction. This platform is based on the dissipation monitoring function of the quartz crystal microbalance with dissipation monitoring (QCM-D) in conjunction with the open-module setup of the QCM-D. We then employed this platform to assess the effects of various pathways-specific modulators on the adhering process of keratinocytes. We demonstrated that this "top-down" approach is as effective in enhancing the adhesion of keratinocytes as the conventional "bottom-up" approach that relies on modifying the substrate surface with the adhesion protein such as fibronectin. We envision that this new "top-down" approach combined with the QCM-D-based in vitro platform will help facilitate the future development of new therapies for enhancing osseointegration and promoting wound healing.

Quartz crystal microbalance: Sensing cell-substrate adhesion and beyond.

Cell adhesion is an essential aspect of cellular behavior. Finding innovative methods to probe the adhesion of cells in their native state can greatly advance the understanding of control and regulation of cellular behavior and their impact on human health. The quartz crystal microbalance (QCM) is a label-free, biosensing system that has, in the past fifty years, evolved from a simple acoustic based mass sensor to a powerful bioanalytical tool. Its unique capability of monitoring the cell-substrate interaction non-invasively in real time has led to the emergence of its applications in areas that are relevant to fundamental cell biology and medical research. This review is intended to provide readers an overview of the use of the QCM for examination of cell-substrate adhesion. It also describes how this innovative approach can be extended to the study of other aspects of cellular behavior, such as cell morphology, cell mechanics, cell motility, cell signaling, all of which can potentially be applied to medical diagnosis and/or pharmaceutical development. In this review a major emphasis is placed on informing readers about some of the most important practical aspects of the QCM-based cell study including data acquisition and analysis, the substrate surface manipulation, and cell manipulation.

Synthesis of macromolecular mimics of small leucine-rich proteoglycans with a poly(ethylene glycol) core and chondroitin sulphate bristles.

Small leucine-rich proteoglycans (SLRPs) are a class of molecules prevalent in almost all tissues types and are thought to be responsible for collagen organization and macro-scale biological properties. However, when they are dysfunctional or degraded, severe pathological phenotypes are observed. Here we investigate macromolecular mimics to SLRPs using poly(ethylene glycol) (PEG) as a core (replacing the protein core of natural SLRPs) and chondroitin sulphate (CS) bristle(s) in an end-on attachment (via epoxide-amine reactions), mimicking the physical structure of the natural SLRPs. Poly(ethylene glycol)-diglycidyl ether (PEG-DEG) and ethylene glycol-diglycidyl ether (EG-DGE) monomers were used to incorporate CS bristles into a macromolecule that closely mimics the SLRP biglycan structure in a grafting-to strategy. The kinetics of these reactions was studied along with the specific viscosity and cytocompatibility of resulting CS macromolecules. Structures were found to incorporate two CS chains (similar to biglycan) on average and exhibited cytocompatibility equivalent to or better than CS-only controls.

Biomimetic Proteoglycans Mimic Macromolecular Architecture and Water Uptake of Natural Proteoglycans.

Aging and degeneration of human tissue come with the loss of tissue water retention and associated changes in physical properties partially due to degradation and subsequent loss of proteoglycans. We demonstrated a novel method of fabrication of biomimetic proteoglycans, which mimic the three-dimensional bottlebrush architecture and physical behavior of natural proteoglycans responsible for tissue hydration and structural integrity. Biomimetic proteoglycans are synthesized by an end-on attachment of natural chondroitin sulfate bristles to a synthetic poly(acryloyl chloride) backbone. Atomic force microscopy imaging suggested three-dimensional core-bristle architecture, and hydrodynamic size of biomimetic proteoglycans was estimated at 61.3 ± 12.3 nm using dynamic light scattering. Water uptake results indicated that biomimetic proteoglycans had a ∼50% increased water uptake compared to native aggrecan and chondroitin sulfate alone. The biomimetic proteoglycans are cytocompatible in the physiological ranges of concentrations and could be potentially used to repair damaged or diseased tissue with depleted proteoglycan content.

Quartz crystal microbalance (QCM): useful for developing procedures for immobilization of proteins on solid surfaces.

We demonstrate the combined use of liquid and air measurements with the quartz crystal microbalance (QCM) for quantitative analysis of multistep reaction procedures leading to immobilized proteins on solid surfaces. Reactions are conducted on the surfaces of QCM sensor crystals and are quantified by measurements of resonant frequency of the crystals before and after each reaction step. When reactions are conducted in the flow cell of the QCM in the presence of solvent, measurement of resonant frequency can be made in situ (liquid measurement). When reactions cannot be conducted in the flow cell because of temperatures or solvents not tolerated by the cell, frequency can be measured after evaporation of solvent (air measurement). Each reaction step can be analyzed by either liquid or air measurement so that the whole multistep procedure is addressed, no matter how diverse the chemical nature of the steps. We conducted identical multistep procedures on two different starting surfaces, gold and silica, and found comparable results.

Dissipation monitoring for assessing EGF-induced changes of cell adhesion.

Epidermal growth factor (EGF)-induced cell de-adhesion has been implicated as a critical step of normal embryonic development, wound repair, inflammatory response, and tumor cell metastasis. Like many other cellular processes, this cell de-adhesion exhibits a complex, time-dependent pattern. A comprehensive understanding of this process requires a quantitative, real-time assessment of cell-substrate interactions at the molecular level. We employed the quartz crystal microbalance with dissipation monitoring (QCM-D) to successfully track the EGF-induced changes in energy dissipation factor, ΔD, of a monolayer of MCF10A cells in real time. This time-dependent ΔD response correlates well both qualitatively and quantitatively with sequential events of a rapid disassembly, transition, and slow reassembly of focal adhesions of the cells in response to EGF exposure. Based on this strong correlation, we utilized the QCM-D to demonstrate that this dynamic focal-adhesion restructuring is regulated temporally by the downstream pathways of EGFR signaling such as the PI3K, MAPK/ERK, and PLC pathways. Because the QCM-D is a noninvasive technique, this novel approach potentially has a broad range of applications in the fundamental study of cellular processes, such as cell signaling and trafficking and mechanotransduction, and holds promise for drug and biomarker screening.

Characterization of mechanical behavior of an epithelial monolayer in response to epidermal growth factor stimulation.

Cell signaling often causes changes in cellular mechanical properties. Knowledge of such changes can ultimately lead to insight into the complex network of cell signaling. In the current study, we employed a combination of atomic force microscopy (AFM) and quartz crystal microbalance with dissipation monitoring (QCM-D) to characterize the mechanical behavior of A431 cells in response to epidermal growth factor receptor (EGFR) signaling. From AFM, which probes the upper portion of an individual cell in a monolayer of cells, we observed increases in energy dissipation, Young's modulus, and hysteresivity. Increases in hysteresivity imply a shift toward a more fluid-like mechanical ordering state in the bodies of the cells. From QCM-D, which probes the basal area of the monolayer of cells collectively, we observed decreases in energy dissipation factor. This result suggests a shift toward a more solid-like state in the basal areas of the cells. The comparative analysis of these results indicates a regionally specific mechanical behavior of the cell in response to EGFR signaling and suggests a correlation between the time-dependent mechanical responses and the dynamic process of EGFR signaling. This study also demonstrates that a combination of AFM and QCM-D is able to provide a more complete and refined mechanical profile of the cells during cell signaling.

Real-time and label-free detection of cellular response to signaling mediated by distinct subclasses of epidermal growth factor receptors.

Epidermal growth factor receptors (EGFRs) have often shown two distinct binding affinities for epidermal growth factor. It is the high-affinity EGFR that is predominantly responsible for mediating the cell signaling that plays an indispensable role in cell growth, proliferation, motility, and differentiation. We applied the quartz crystal microbalance with dissipation monitoring (QCM-D) to track short-term cellular responses to EGFR signaling in human carcinoma A431 cells. Cellular responses to high- and low-affinity EGFR signaling were detected individually as well as simultaneously based on changes in mass and viscoelasticity of cells. These responses are associated with EGF-induced biological processes including the cytoskeleton remodeling and calcium influx. QCM-D provides a label-free sensor technology that can be exploited to investigate the role of high-affinity EGFR in cancer development and cancer prognosis.

Use of the quartz crystal microbalance to monitor ligand-induced conformational rearrangements in HIV-1 envelope protein gp120.

We evaluated the potential of a quartz crystal microbalance with dissipation monitoring (QCM-D) to provide a sensitive, label-free method for detecting the conformational rearrangement of glycoprotein gp120 upon binding to different ligands. This glycoprotein is normally found on the envelope of the HIV-1 virus and is involved in viral entry into host cells. It was immobilized on the surface of the sensing element of the QCM-D and was exposed to individual solutions of several different small-molecule inhibitors as well as to a solution of a soluble form of the host cell receptor to which gp120 binds. Instrument responses to ligand-triggered changes were in qualitative agreement with conformational changes as suggested by other biophysical methods.

Evidence for relative radius of gyration as the criterion for selective diffusion behavior of polymer brushes.

When exposed to a dilute solution of free species, the polymer brush functions as a selective barrier to diffusion. Experiments with linear polymer chains and dendrimers of various sizes demonstrated that the selection criterion is relative size, i.e., radius of the free species (radius of gyration for linear chains and simple radius for dendrimers) relative to the radius of gyration of the chains composing the brush. This suggests that linear chains do not necessarily assume extended conformations as they diffuse into a brush but have conformations similar to those of nanoscale spherical inclusions.

Transition from mushroom to brush during formation of a tethered layer.

Tethering of monodisperse, chain-end-functionalized polymer from dilute solution to a solid surface shows three regimes of kinetics. This paper presents support for the hypothesis that the experimentally observed third regime is indeed the transition from mushroom to brush and that it occurs in a spatially nonuniform manner. Both time-step snapshots generated by a Monte Carlo simulation of the tethering process and atomic force microscopy images of actual surfaces during the process show that the third regime is characterized by nonuniform surface texture, while the surface texture is uniform prior to and after the third regime.