ABSTRACT
Food industry by-products such as grape pomace (GP), tomato pomace (TP), and spent coffee grounds (SCG) are rich in polyphenols (PP) but are easily biodegradable. The aim of this study is to test Spontaneous Fermentation (SF) as treatment to modify PP profile and bioactivity. The results highlighted that the by-products' organic matter and the microbial populations drove the SF evolution; heterolactic, alcoholic, and their mixtures were the predominant metabolisms of TP, GP, and SCG + GP co-fermentation. Increases in the extractable amounts and antiradical activity occurred for all the biomasses. Regarding the aglycate-PPs (APP), i.e. the most bioreactive PPs, significant changes occurred for TP and GP but did not influence the anti-inflammatory bioactivity. The co-fermentation increased significantly chlorogenic acid and consumed most of the APPs, acting as a purification system to obtain a highly concentrated APP fraction, so that the extract might be employed for a specific purpose.
Subject(s)
Polyphenols , Vitis , Anti-Inflammatory Agents , Coffee , Fermentation , Polyphenols/analysisABSTRACT
This study describes the diversification of products obtainable from the organic fraction of municipal solid waste (OFMSW) by producing polyhydroxyalkanoates (PHA) from the liquid fraction and biomethane from the residual solid fraction. OFMSW samples were taken during the 2021 season from two full field scale plants treating wastes. After solid/liquid (S/L) separation, 80% of initial organic acids (OAs) were released in the liquid stream. OAs were then used as feed for PHA production and residual solid cakes were tested for biomethane production. Complete mass balance and energy balance were calculated. PHAs production was of 115 ± 23 (n = 6) g kg- 1 OFMSW (TS) and residual biomethane of 219 ± 3 g kg- 1 OFMSW TS, (n = 6). Energy balance indicated that nearly 40% of OFMSW energy was recovered as products. This value was lower than that obtained previously when AD was performed before OAs separation (i.e. 64%).
Subject(s)
Polyhydroxyalkanoates , Refuse Disposal , Anaerobiosis , Bioreactors , Methane , Solid Waste/analysisABSTRACT
A simple biorefinery aimed at producing both biomethane (CH4) and polyhydroxyalkanoates (PHAs), was proposed to valorize the organic fraction of municipal solid waste (OFMSW). Anaerobic digestion (AD) was tested at different organic loading rates (OLR-I-II-III) (i.e. 3, 4 and 6 g L-1 d-1, respectively), producing biomethane and volatile fatty acids (VFAs)-rich digestate, the VFAs were then used to produce PHAs. Specific biogas and CH4 production remained similar when adopting different OLRs (biogas of 522-600 NL kg-1 VS and CH4 of 64-67% v/v). VFAs concentrated with OLR increases and their patterns were modified. PHA production was in the range of 117-199 g kg-1 OFMSWTS with the lowest production being associated to different polymer composition. The net energy recovery of this simple biorefinery accounted for 64% of OFMSW energy content, and the PHAs produced represented over 30% of the total energy.
Subject(s)
Polyhydroxyalkanoates , Refuse Disposal , Anaerobiosis , Biofuels/analysis , Bioreactors , Methane , Solid Waste/analysisABSTRACT
Two tomato pomace (TP) were studied as feedstocks to obtain extracts that are rich in polyphenols. TPs prompt degradation impairs biomass safety, thus naturally present microflora were tested to perform conservation, and own lactic bacteria became predominant after 60 days of treatment. The extracts of TPs and TPs fermented (TPF) were chemically characterized and tested for antioxidant and anti-inflammatory activities. Flavonoids and phenolic acids were classed as aglycone-polyphenols (A-PP), the most bioactive polyphenol fraction. Fermentation led to a reduction of the A-PP amount, but no significant change in composition. Antioxidant power increased, despite the A-PP reduction, for the presence of fermentation metabolites having aromatic-substituent. TP and TPF both have anti-inflammatory properties that were strictly dependent upon the A-PP content. Fermentation preserved the anti-inflammatory activity and the Partial Least Square (PLS) identified as the most active molecules naringenin chalcone, kaempferol, gallic acid, and cinnamic acid, together with the definition of the active dose.
ABSTRACT
Phosphorus is an essential element in the food production chain, even though it is a non-renewable and limited natural resource, which is going to run out soon. However, it is also a pollutant if massively introduced into soil and water ecosystems. This study focuses on the current alternative low-cost technologies for phosphorus recovery from livestock effluents. Recovering phosphorus from these wastewaters is considered a big challenge due to the high phosphorus concentration (between 478 and 1756 mg L-1) and solids content (> 2-6% of total solids). In particular, the methods discussed in this study are (i) magnesium-based crystallization (struvite synthesis), (ii) calcium-based crystallization, (iii) electrocoagulation and (iv) biochar production, which differ among them for some advantages and disadvantages. According to the data collected, struvite crystallization achieves the highest phosphorus removal (> 95%), even when combined with the use of seawater bittern (a by-product of sea salt processing) instead of magnesium chloride pure salt as the magnesium source. Moreover, the crystallizer technology used for struvite precipitation has already been tested in wastewater treatment plants, and data reported in this review showed the feasibility of this technology for use with high total solids (> 5%) livestock manure. Furthermore, economic and energetic analyses here reported show that struvite crystallization is the most practicable among the low-cost phosphorus recovery technologies for treating livestock effluents.
Subject(s)
Livestock , Phosphorus , Water Purification , Animals , Ecosystem , Magnesium Compounds , Phosphates , Struvite , Waste Disposal, FluidABSTRACT
In this study a two-steps bioprocess approach aimed at biohydrogen production via dark-fermentation, and polyhydroxyalkanoates-PHA production by mixed microbial cultures, was proposed to valorise two dairy-waste streams coming from cheese whey deproteinization (i.e. Ricotta cheese production and ultrafiltration). During the first step, the increase of OLR was tested, resulting in higher daily H2 volume (3.47 and 5.07 NL H2 d-1 for second cheese whey-SCW and concentrated cheese whey permeate-CCWP) and organic acids production (14.6 and 12.6â¯gâ¯L-1â¯d-1 for SCW and CCWP) for both the substrates, keeping good conversion of sugars into H2 (1.37 and 1.93â¯mol H2 mol-1 sugars for SCW and CCWP). During the second step, the organic acids were used for PHA production reaching high conversion yields for both the fermented streams (as average 0.74⯱â¯0.14â¯mg CODPHA mg-1 CODOA-in), with a maximum polymer content of 62⯱â¯4.5 and 55.1⯱â¯1.3% (g PHA g-1 VSS) for fermented SCW and fermented CCWP respectively. For the results reported, this study could be taken into consideration for larger scale application.
Subject(s)
Cheese , Polyhydroxyalkanoates , Bioreactors , Fermentation , WheyABSTRACT
Microbial Electrochemical Technologies are based on the use of electrochemically active microorganisms that can carry out extracellular electron transfer to an electrode while they are oxidizing the organic compounds. The dynamics and changes of the bacterial community in the anode biofilm and planktonic broth of an acetate fed batch single chamber air cathode MFC have been studied by combing flow-cytometry and Illumina sequencing techniques. At the beginning of the test, from 0 h to 70 h, microbial planktonic communities changed from four groups to two groups, as revealed by DNA content, and from three groups to one group based on the cell membrane polarization revealed by a DiOC6(3) probe. Between 4th day and 13th day, microbial communities changed from one group to a maximum of three groups, monitoring DNA content, and from one group to two based on the cell membrane polarization. The 16S rDNA gene profiling confirmed the shift in microbial communities, with Acinetobacter (39.34%), Azospirillum (27.66%), Arcobacter (4.17%) and Comamonas (2.62%) being the most abundant genera at the beginning of MFC activation. After 70 h the main genera detected were Azospirillum (46.42%), Acinetobacter (34.66%), Enterococcus (2.32%), Dysgonomonas (2.14%). Data obtained have shown that flow cytometry and illumina sequencing are useful tools to monitor "online" the changes in microbial communities during the MFCs start-up and the increase of Azospirillum and Acinetobacter genera is in good agreement with the MFC voltage generation. Moreover, monitoring planktonic populations, instead of the less accessible anode biofilm, was in good agreement with the evolution of MFC voltage.
ABSTRACT
Two fermented cheese wheys (FCW), FCW1 composed of lactic, acetic and butyric acids in the proportion of 58/16/26 (% CODOrganic Acid (OA)) and FCW2 composed of acetic, propionic, butyric, lactic and valeric acids in the proportion of 58/19/13/6/4 (% CODOA) were used to produce polyhydroxyalkanoates (PHAs) by using a pre-selected mixed microbial culture (MMC). PHA accumulation gave for fermented FCW1 a PHA yield (Ytot) of 0.24±0.02mgCODPHAmgCODSolubleSubstrate(SS)(-1) and a total PHA production, referred to the substrate used, of 60gPHAkgcheesewheyTotalSolids(TS)(-1). For fermented FCW2 results were: PHA yield (Ytot) of 0.42±0.03mgCODPHAmgCODSS(-1) and PHA from a substrate of 70gPHAkgcheesewheyTS(-1). Qualitatively, PHAs from FCW1 was made up exclusively of 3-hydroxybutyrate (HB), while those obtained from FCW2 were composed of 40% of 3-hydroxyvalerate (HV) and 60% of HB.
Subject(s)
3-Hydroxybutyric Acid/biosynthesis , Bioreactors , Fermentation , Pentanoic Acids/metabolism , Whey/metabolism , Acids , Cheese , Polyhydroxyalkanoates/biosynthesisABSTRACT
Electro-fermentation (EF) merges traditional industrial fermentation with electrochemistry. An imposed electrical field influences the fermentation environment and microbial metabolism in either a reductive or oxidative manner. The benefit of this approach is to produce target biochemicals with improved selectivity, increase carbon efficiency, limit the use of additives for redox balance or pH control, enhance microbial growth, or in some cases enhance product recovery. We discuss the principles of electrically driven fermentations and how EF can be used to steer both pure culture and microbiota-based fermentations. An overview is given on which advantages EF may bring to both existing and innovative industrial fermentation processes, and which doors might be opened in waste biomass utilization towards added-value biorefineries.