Enrofloxacin Pharmaceutical Formulations through the Polymer-Free Electrospinning of ß-Cyclodextrin-oligolactide Derivatives.

Enrofloxacin (ENR), a member of the fluoroquinolone class of antibiotics, is widely used in veterinary medicine to treat bacterial infections. Like many antibiotics, ENR has limited water solubility and low bioavailability. To address these challenges, drug formulations using solid dispersions, nanosuspensions, surfactants, cocrystal/salt formation, and inclusion complexes with cyclodextrins may be employed. The approach described herein proposes the development of ENR formulations by co-electrospinning ENR with custom-prepared cyclodextrin-oligolactide (CDLA) derivatives. This method benefits from the high solubility of these derivatives, enabling polymer-free electrospinning. The electrospinning parameters were optimized to incorporate significant amounts of ENR into the CDLA nanofibrous webs, reaching up to 15.6% by weight. The obtained formulations were characterized by FTIR and NMR spectroscopy methods and evaluated for their antibacterial activity against Staphylococcus aureus, Escherichia coli, and Pseudomonas aeruginosa. This study indicates that the presence of CDLA derivative does not inhibit the antibacterial activity of ENR, recommending these formulations for further development.

Synthesis of ß-cyclodextrin derivatives substituted at larger or smaller rims via amine-catalyzed ring-opening oligomerization of ε-caprolactone.

The involvement of cyclodextrins in transesterification reactions with active esters has been described to mimic enzyme-catalyzed reactions, making cyclodextrin molecules suitable as enzyme models. Cyclodextrin-catalyzed ring-opening of cyclic esters in bulk reaction conditions was considered to proceed similarly. However, the mechanism of activating cyclic esters through inclusion in the cyclodextrin cavity remains incompletely understood to date. The present research is focused on observing the transesterification of ε-caprolactone in the presence of ß-cyclodextrin and additional amine organocatalysts within dimethyl sulfoxide solutions. The conducted experiments provide insights into the structural changes caused by various catalytic conditions in terms of the substitution pattern of the cyclodextrins. Our results are supported by a deep structural characterization through NMR and MALDI MS, which revealed the prospect of promoting rim-selective substitution of ß-cyclodextrin at either secondary or primary hydroxyl groups using 1,8-diazabicyclo[5.4.0]undec-7-ene (DBU) and 1,5,7-triazabicyclo[4.4.0]dec-5-ene (TBD) organocatalysts. This offers the possibility to prepare cyclodextrin derivatives with specific substitution patterns. Based on the acquired structural information, the particular pathway in which ß-cyclodextrin influences the ring-opening of ε-caprolactone is delineated as follows: monomer complexation, substitution at the larger rim, chain elongation, and intramolecular transfer toward the smaller rim.

Poly(ethylene glycol) Methyl Ether Acrylate-Grafted Chitosan-Based Micro- and Nanoparticles as a Drug Delivery System for Antibiotics.

Nanotechnology is the science of creating materials at the nanoscale by using various devices, structures, and systems that are often inspired by nature. Micro- and nanoparticles (MPs, NPs) are examples of such materials that have unique properties and can be used as carriers for delivering drugs for different biomedical applications. Chitosan (CS) is a natural polysaccharide that has been widely studied, but it has a problem with low water solubility at neutral or basic pH, which limits its processability. The goal of this work was to use a chemically modified CS with poly(ethylene glycol) methyl ether acrylate (PEGA) to prepare CS micronic and submicronic particles (MPs/NPs) that can deliver different types of antibiotics, respectively, levofloxacin (LEV) and Ciprofloxacin (CIP). The particle preparation procedure employed a double crosslinking method, ionic followed by a covalent, in a water/oil emulsion. The studied process parameters were the precursor concentration, stirring speeds, and amount of ionic crosslinking agent. MPs/NPs were characterized by FT-IR, SEM, light scattering granulometry, and Zeta potential. MPs/NPs were also tested for their water uptake capacity in acidic and neutral pH conditions, and the results showed that they had a pH-dependent behavior. The MPs/NPs were then used to encapsulate two separate drugs, LEV and CIP, and they showed excellent drug loading and release capacity. The MPs/NPs were also found to be safe for cells and blood, which demonstrated their potential as suitable drug delivery systems for biomedical applications.

Polyurethane Degradable Hydrogels Based on Cyclodextrin-Oligocaprolactone Derivatives.

Polymer networks based on cyclodextrin and polyethylene glycol were prepared through polyaddition crosslinking using isophorone diisocyanate. The envisaged material properties are the hydrophilic character, specific to PEG and cyclodextrins, and the capacity to encapsulate guest molecules in the cyclodextrin cavity through physical interactions. The cyclodextrin was custom-modified with oligocaprolactone to endow the crosslinked material with a hydrolytically degradable character. SEM, DTG, and FTIR characterization methods have confirmed the morphology and structure of the prepared hydrogels. The influence of the crosslinking reaction feed was investigated through dynamic rheology. Further, thermal water swelling and hydrolytic degradation in basic conditions revealed the connectivity of the polymer network and the particular influence of the cyclodextrin amount in the crosslinking reaction feed on the material properties. Also, levofloxacin was employed as a model drug to investigate the drug loading and release capacity of the prepared hydrogels.

Inclusion Complexes of 3,4-Ethylenedioxythiophene with Per-Modified ß- and γ-Cyclodextrins.

Herein, we report the synthesis of inclusion complexes (ICs) based on 3,4-ethylenedioxythiophene (EDOT) with permethylated ß-cyclodextrins (TMe-ßCD) and permethylated γ-cyclodextrins (TMe-γCD) host molecules. To prove the synthesis of such ICs, molecular docking simulation, UV-vis titrations in water, 1H-NMR, and H-H ROESY, as well as matrix-assisted laser desorption ionization mass spectroscopy (MALDI TOF MS) and thermogravimetric analysis (TGA) were carried out on each of the EDOT∙TMe-ßCD and EDOT∙TMe-γCD samples. The results of computational investigations reveal the occurrence of hydrophobic interactions, which contribute to the insertion of the EDOT guest inside the macrocyclic cavities and a better binding of the neutral EDOT to TMe-ßCD. The H-H ROESY spectra show correlation peaks between H-3 and H-5 of hosts and the protons of the guest EDOT, suggesting that the EDOT molecule is included inside the cavities. The MALDI TOF MS analysis of the EDOT∙TMe-ßCD solutions clearly reveals the presence of MS peaks corresponding to sodium adducts of the species associated with the complex formation. The IC preparation shows remarkable improvements in the physical properties of EDOT, rendering it a plausible alternative to increasing its aqueous solubility and thermal stability.

Mass Spectrometry of Esterified Cyclodextrins.

Cyclodextrins are cyclic oligosaccharides that have received special attention due to their cavity-based structural architecture that imbues them with outstanding properties, primarily related to their capacity to host various guest molecules, from low-molecular-mass compounds to polymers. Cyclodextrin derivatization has been always accompanied by the development of characterization methods, able to unfold complicated structures with increasing precision. One of the important leaps forward is represented by mass spectrometry techniques with soft ionization, mainly matrix-assisted laser desorption/ionization (MALDI) and electrospray ionization (ESI). In this context, esterified cyclodextrins (ECDs) benefited also from the formidable input of structural knowledge, thus allowing the understanding of the structural impact of reaction parameters on the obtained products, especially for the ring-opening oligomerization of cyclic esters. The current review envisages the common mass spectrometry approaches such as direct MALDI MS or ESI MS analysis, hyphenated liquid chromatography-mass spectrometry, and tandem mass spectrometry, employed for unraveling the structural features and particular processes associated with ECDs. Thus, the accurate description of complex architectures, advances in the gas phase fragmentation processes, assessment of secondary reactions, and reaction kinetics are discussed in addition to typical molecular mass measurements.

Electrospinning of Cyclodextrin-Oligolactide Derivatives.

The materials used for the preparation of electrospun mats exhibit a large variety. Among them, cyclodextrins (CDs) and their derivatives have received thorough attention. Herein, we focus on the preparation of electrospun fibers based on biodegradable cyclodextrin-oligolactide (CDLA) derivatives, which may be qualified as polymer-free cyclodextrin. CDLA was prepared by ring opening of L-lactide initiated by the ß-cyclodextrin. A clear structural image of the high-purity CDLA product was proved by MALDI MS. Preparation of the electrospun mats was optimized by taking into consideration the electrospinning parameters such as applied voltage, needle-to-collector distance, flow rate, the concentration of cyclodextrin solutions, and solvent type. The obtained electrospun fibers were morphologically characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), and small-angle X-ray scattering (SAXS). SEM allowed the optimization of the electrospinning process to obtain beadless fibers with submicronic diameters. Further analysis by TEM and SAXS revealed the inner structural features of the CDLA-based filaments. Our results showed that the high purity CDLA materials, structurally well-defined at the molecular level, are suitable for the preparation of electrospun mats by using dimethylformamide or a water/acetonitrile mixture as electrospinning solvents, similar to lower molecular weight commercial cyclodextrin derivatives.

Polyethylene Glycol-Isophorone Diisocyanate Polyurethane Prepolymers Tailored Using MALDI MS.

The reaction of diols with isocyanates, leading to mono-functional and di-functional prepolymers may be investigated using various characterization methods which show the overall conversion of isocyanate monomers. On the other hand, matrix-assisted laser desorption ionization mass spectrometry (MALDI MS) polymer characterization can be employed to identify the monomer units, the end-group functionalities, molecular weight averages, and to determine the copolymer sequence. Herein, we focus on prepolymer synthesis using isophorone diisocyanate (IPDI), a widely used diisocyanate for prepolymers preparation, especially in waterborne polyurethane materials. Thus, the reaction between polyethylene glycol diol and IPDI was in-depth investigated by mass spectrometry to determine the influence of the reaction parameters on the prepolymer's structure. The relative content of the different functional oligomer species at given reaction times was determined in the reaction mixture. More specifically, the offline analysis revealed the influence of reaction parameters such as reaction temperature, the concentration of reactants, and the amount of dibutyltin dilaurate catalyst. The established MALDI MS analysis involved measurements of samples, first, directly collected from the reaction mixture and secondly, following derivatization with methanol. The obtained results revealed the effects of reaction parameters on the functionalization reaction with isocyanates, allowing to achieve a better reaction control.

Chitosan Grafted Poly (Ethylene Glycol) Methyl Ether Acrylate Particulate Hydrogels for Drug Delivery Applications.

Chitosan (CS) crosslinking has been thoroughly investigated, but the chemical reactions leading to submicronic hydrogel formulations pose problems due to various physical/chemical interactions that limit chitosan processability. The current study employs the chemical modification of chitosan by Michael addition of poly (ethylene glycol) methyl ether acrylate (PEGA) to the amine groups to further prepare chitosan particulate hydrogels (CPH). Thus, modified CS is subjected to a double crosslinking, ionic and covalent, in water/oil emulsion. The studied process parameters are polymer concentration, stirring speed, and quantity of ionic crosslinker. The CPH were structurally and morphologically characterized through infrared spectroscopy, scanning electron microscopy, light scattering granulometry, and zeta potential, showing that modified CS allows better control of dimensional properties and morphology as compared with neat CS. Swelling properties were studied in acidic and neutral pH conditions, showing that pH-dependent behavior was maintained after grafting and double crosslinking. The applicability of the prepared materials was further tested for drug loading and in vitro delivery of levofloxacin (LEV), showing excellent capacity. CPH were found to be cyto- and hemocompatible demonstrating their potential for effective use as a controlled release system for different biomedical applications.

Nematic-to-Isotropic Phase Transition in Poly(L-Lactide) with Addition of Cyclodextrin during Abiotic Degradation Study.

Poly(L-lactide) is capable of self-assembly into a nematic mesophase under the influence of temperature and mechanical stresses. Therefore, subsequent poly(L-lactide) films were obtained and characterized, showing nematic liquid crystal properties both before and after degradation. Herein, we present that, by introducing ß-cyclodextrin into the polymer matrix, it is possible to obtain a chiral nematic mesophase during pressing, regardless of temperature and time. The obtained poly(L-lactide) films exhibiting liquid crystal properties were subjected to degradation tests and the influence of degradation on these properties was determined. Thermotropic phase behavior was investigated using polarized optical microscopy, X-ray diffraction, and differential scanning calorimetry. The degradation process demonstrated an influence on the liquid crystal properties of pressed polymer films. The colored planar texture of the chiral nematic mesophase, which was not observed prior to degradation in films without the addition of ß-cyclodextrin, appeared after incubation in water as a result of the entrapment of degradation products in the polymer matrix. These unusual tailor-made properties, obtained in liquid crystals in (bio)degradable polymers using a simple method, demonstrate the potential for advanced photonic applications.

The Influence of the Hydroxyl Type on Crosslinking Process in Cyclodextrin Based Polyurethane Networks.

The influence of the hydroxyl groups (OH) type on the polyaddition processes of isocyanates represents a critical approach for the design of multicomponent polyurethane systems. Herein, to prove the effect of hydroxyl nature on both the isocyanate-OH polyaddition reactions and the structure/properties of the resulting networks, two structurally different cyclodextrins in terms of the primary and secondary groups' ratio were analyzed, namely native ß-cyclodextrin (CD) and its derivative esterified to the primary hydroxyl groups with oligolactide chains (CDLA). Thus, polyurethane hydrogels were prepared via the polyaddition of CD or CDLA to isophorone diisocyanate polyethylene glycol-based prepolymers (PEG-(NCO)2). The degradable character of the materials was induced by intercalating oligolactide short sequences into the polymer chains composing the polymer network. In order to establish the influence of the OH type, the synthesis of polyurethane hydrogels was analyzed by a rheological investigation of the overall system reactivity. Materials properties such as swelling behavior, thermal properties and hydrolytic degradation were influenced by the reaction feed. Specifically, the presence of primary OH groups leads to more compact networks with similar water uptake, disregarding the CD content, while the predominance of secondary OH groups together with the presence of oligolactide spacers leads to the fine tuning of the water swelling properties.

Cyclodextrin-Oligocaprolactone Derivatives-Synthesis and Advanced Structural Characterization by MALDI Mass Spectrometry.

Cyclodextrins have previously been proven to be active in the catalysis of cyclic ester ring-opening reactions, hypothetically in a similar way to lipase-catalyzed reactions. However, the way they act remains unclear. Here, we focus on ß-cyclodextrin's involvement in the synthesis and characterization of ß-cyclodextrin-oligocaprolactone (CDCL) products obtained via the organo-catalyzed ring-opening of ε-caprolactone. Previously, bulk or supercritical carbon dioxide polymerizations has led to inhomogeneous products. Our approach consists of solution polymerization (dimethyl sulfoxide and dimethylformamide) to obtain homogeneous CDCL derivatives with four monomer units on average. Oligomerization kinetics, performed by a matrix-assisted laser desorption ionization mass spectrometry (MALDI MS) optimized method in tandem with 1H NMR, revealed that monomer conversion occurs in two stages: first, the monomer is rapidly attached to the secondary OH groups of ß-cyclodextrin and, secondly, the monomer conversion is slower with attachment to the primary OH groups. MALDI MS was further employed for the measurement of the ring-opening kinetics to establish the influence of the solvents as well as the effect of organocatalysts (4-dimethylaminopyridine and (-)-sparteine). Additionally, the mass spectrometry structural evaluation was further enhanced by fragmentation studies which confirmed the attachment of oligoesters to the cyclodextrin and the cleavage of dimethylformamide amide bonds during the ring-opening process.

Structural Architectural Features of Cyclodextrin Oligoesters Revealed by Fragmentation Mass Spectrometry Analysis.

Cyclodextrins (CDs) were used in the present study for the ring-opening oligomerization (ROO) of l-lactide (LA) in order to synthesize biodegradable products with possible applications in pharmaceutical and medical fields. The practical importance of ROO reactions may reside in the possibility of synthesizing novel CD derivatives with high purity due to the dual role played by CDs, the role of the initiator through the hydroxylic groups, and the role of the catalyst by monomer inclusion in the CD cavity. The analyzed compounds were CDs modified with oligolactides obtained through ROO reactions of l-lactide in dimethylformamide. The resulting CD isomeric mixtures were investigated using classical characterization techniques such as gel permeation chromatography and nuclear magnetic resonance. Moreover, advanced mass spectrometry (MS) techniques were employed for the determination of the average number of monomer units attached to the cyclodextrin and the architecture of the derivatives (if the monomer units were attached as a single chain or as multiple chains). Thus, fragmentation studies effectuated on two different instruments (ESI Q-TOF and MALDI TOF) allowed us to correlate the size of the oligolactide chains attached to the CD with the observed fragmentation patterns.

Molecular Level Structure of Biodegradable Poly(Delta-Valerolactone) Obtained in the Presence of Boric Acid.

In this study, low molecular weight poly(δ-valerolactone) (PVL) was synthesized through bulk-ring openings polymerization of δ-valerolactone with boric acid (B(OH)3) as a catalyst and benzyl alcohol (BnOH) as an initiator. The resulting homopolymer was characterized with the aid of nuclear magnetic resonance (NMR) and mass spectrometry (MS) techniques to gain further understanding of its molecular structure. The electrospray ionization mass spectrometry (ESI-MS) spectra of poly(δ-valerolactone) showed the presence of two types of homopolyester chains-one terminated by benzyl ester and hydroxyl end groups and one with carboxyl and hydroxyl end groups. Additionally, a small amount of cyclic PVL oligomers was identified. To confirm the structure of PVL oligomers obtained, fragmentation of sodium adducts of individual polyester molecules terminated by various end groups was explored in ESI-MSn by using collision induced dissociation (CID) techniques. The ESI-MSn analyses were conducted both in positive- and negative ion mode. The comparison of the fragmentation spectra obtained with proposed respective theoretical fragmentation pathways allowed the structure of the obtained oligomers to be established at the molecular level. Additionally, using matrix-assisted laser desorption ionization time-of-flight mass spectrometry (MALDI-TOF-MS), it was proven that regardless of the degree of oligomerization, the resulting PVL samples were a mixture of two types of linear PVL oligomers differing in end groups and containing just a small amount of cyclic oligomers that tended to be not visible at higher molar masses.

Polyglobalide-Based Porous Networks Containing Poly(ethylene glycol) Structures Prepared by Photoinitiated Thiol-Ene Coupling.

The high interest in polymers from natural resources prompted us to investigate the use of enzymatically synthesized polyglobalide (PGL) in the preparation of polymer networks with potential applications as biomaterials for drug delivery devices. Polymer networks were obtained under mild conditions by photoinitiated thiol-ene coupling between PGL and a poly(ethylene glycol- co-thiomalate) (PEG-SH) copolymer obtained by polycondensation. The obtained polymer networks were thoroughly characterized by Raman spectroscopy, scanning electron microscopy, titration of thiol groups and elemental analysis. Our study took into consideration the synthesis parameters for the polymer networks, such as the total polymer concentration and the SH/C=C functionality molar ratio. Swelling in both THF and water was assessed, and the potential of the materials for drug delivery was determined. The scanning electron microscopy images showed that the prepared polymer networks may have different morphologies ranging from homogeneous polymer materials to macroporous structures. Additionally, the prepared materials were found to be suitable from a cytotoxicity point of view, enabling their application as biomaterials for drug delivery devices.

Cyclodextrins tethered with oligolactides - green synthesis and structural assessment.

Biodegradable oligolactide derivatives based on α-, ß- and γ-cyclodextrins (CDs) were synthesized by a green procedure in which CDs play the role of both the initiator and the catalyst. The synthetic procedure in which CDs and L-lactide (L-LA) are reacting in bulk at relatively high temperature of 110 °C was investigated considering the structural composition of the products. The obtained products were thoroughly characterized via mass spectrometry methods with soft ionization like matrix-assisted laser desorption ionization (MALDI) and electrospray ionization (ESI). Liquid chromatography (LC) separation with evaporative light scattering detection (ELSD) and NMR analysis were employed in order to elucidate the structural profiles of the obtained mixtures. The results clearly demonstrate that the cyclodextrins were tethered with more than one short oligolactate chain per CD molecule, predominantly at the methylene group, through ring opening of L-LA initiated by primary OH groups.

Nanotechnology approaches for pain therapy through transdermal drug delivery.

The paper focuses on the advances in the field of pain treatment by transdermal delivery of specific drugs. Starting from a short description of the skin barrier, the pharmacodynamics and pharmacokinetics including absorption, distribution, action mechanism, metabolism and toxicity, aspects related to the use of pain therapy drugs are further discussed. Most recent results on topical anesthetic agents as well as the methods proved to overcome the skin barrier and to provide efficient delivery of the drug are also discussed. The present review is proposing to summarize the recent literature on the pharmacotherapeutic principles of local anesthetics and non-steroidal anti-inflammatory drugs, generally used to alleviate pain but also the drugs as nanoformulations with potential applications in transdermal delivery. A special attention is given to efficient formulations meant for transdermal penetration enhancement of anesthetics where the drug is encapsulated into macrocyclic molecules (cyclodextrins, cyclodextrin derivatives), liposomes or polymer nanoparticles and hydrogels.

Formulation and evaluation of cefuroxim loaded submicron particles for ophthalmic delivery.

Chitosan gelatin particles could be the ideal candidate for intraocular drug delivery due to their desirable properties. Double crosslinking in double emulsion has been used as an original and reliable method for particles preparation and their morphology has been optimized considering the main synthesis parameters such as polymers ratio, crosslinker amount, stirring speed, tensioactive amount and ionic crosslinking time, respectively. The particles have been analyzed for their physical-chemical properties (swelling degree, drug loading and release capacity, surface characteristics, etc.), the enzymatic degradation properties along with in vivo ocular investigations (ocular biodistribution, in vivo drug release). In the present study cefuroxim was used as a model drug, which is generally used in the prophylaxis of postoperative endophthalmitis following cataract surgery after intraocular administration. The present study proved that the dimensions and the physical-chemical properties of the particles can be modulated (by varying the preparation parameters) to facilitate the administration, the biodistribution and the drug release in the specific segment of the eye. This experimental study demonstrated also the ability of fluorescent nanoparticles to penetrate ocular tissues close to the administration site (intravitreal injection) and especially their tendency to migrate deep in the retina at time intervals of 72 h.

Carbohydrate based nanoparticles for drug delivery across biological barriers.

In this review, we will summarize the particularities of each of the following barriers from the point of view of drugs passing across them; blood brain barrier, ocular barriers, skin and mucosal barriers. Also, for each biological barrier the most representative examples of polysaccharides and cyclodextrins nanoformulations are presented.

Synthesis and biological activity of some new 1,3,4-thiadiazole and 1,2,4-triazole compounds containing a phenylalanine moiety.

New 1,3,4-thiadiazole, 6, 7 and 1,2,4-triazole derivatives, 8, 9 containing a phenylalanine moiety have been synthesized by intramolecular cyclization of 1,4-disubstituted thiosemicarbazides, 4, 5, in acid and alkaline media, respectively; the thiosemicarbazides were obtained by reaction of hydrazide 3 with appropriate aromatic isothiocyanates. The toxicity of the synthesized compounds was evaluated and the anti-inflammatory study of the triazole compound 9 established an appreciable anti-inflammatory activity that is comparable with that of other nonsteroidal anti-inflammatory agents.