Author Correction: Shape fidelity and structure of 3D printed high consistency nanocellulose.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

Shape fidelity and structure of 3D printed high consistency nanocellulose.

The aim of the present study was to investigate the additive manufacturing process for high consistency nanocellulose. Unlike thermoformable plastics, wood derived nanocelluloses are typically processed as aqueous dispersions because they are not melt-processable on their own. The ability to use nanocellulose directly in additive manufacturing broadens the possibilities regarding usable raw materials and achievable properties thereof. Modern additive manufacturing systems are capable of depositing nanocellulose with micrometer precision, which enables the printing of accurate three-dimensional wet structures. Typically, these wet structures are produced from dilute aqueous fibrillar dispersions. As a consequence of the high water content, the structures deform and shrink during drying unless the constructs are freeze-dried. While freeze-drying preserves the geometry, it results in high porosity which manifests as poor mechanical and barrier properties. Herein, we study an additive manufacturing process for high consistency enzymatically fibrillated cellulose nanofibers in terms of printability, shape retention, structure, and mechanical properties. Particular emphasis is placed on quantitative shape analysis based on 3D scanning, point cloud analysis, and x-ray microtomography. Despite substantial volumetric as well as anisotropic deformation, we demonstrate repeatability of the printed construct and its properties.

Effects of Surfactants on the Preparation of Nanocellulose-PLA Composites.

Thermoplastic composite materials containing wood fibers are gaining increasing interest in the manufacturing industry. One approach is to use nano- or micro-size cellulosic fibrils as additives and to improve the mechanical properties obtainable with only small fibril loadings by exploiting the high aspect ratio and surface area of nanocellulose. In this study, we used four different wood cellulose-based materials in a thermoplastic polylactide (PLA) matrix: cellulose nanofibrils produced from softwood kraft pulp (CNF) and dissolving pulp (CNFSD), enzymatically prepared high-consistency nanocellulose (HefCel) and microcellulose (MC) together with long alkyl chain dispersion-improving agents. We observed increased impact strength with HefCel and MC addition of 5% and increased tensile strength with CNF addition of 3%. The addition of a reactive dispersion agent, epoxy-modified linseed oil, was found to be favorable in combination with HefCel and MC.

Modifying native nanocellulose aerogels with carbon nanotubes for mechanoresponsive conductivity and pressure sensing.

Mechanically excellent native cellulose nanofibers that are cleaved from plant cell walls have been modified by functionalized few-walled carbon nanotubes for hybrid nanofiber/nanotube aerogels. They show elastic mechanical behavior in combination with reversible electrical response under compression allowing responsive conductivity and pressure sensing. The concept combines wide availability of nanocellulosics and electrical functionality of carbon nanotubes synergistically.

Xylan as limiting factor in enzymatic hydrolysis of nanocellulose.

The role of xylan as a limiting factor in the enzymatic hydrolysis of cellulose was studied by hydrolysing nanocellulose samples prepared by mechanical fibrillation of birch pulp with varying xylan content. Analyzing the nanocelluloses and their hydrolysis residues with dynamic FT-IR spectroscopy revealed that a certain fraction of xylan remained tightly attached to cellulose fibrils despite partial hydrolysis of xylan with xylanase prior to pulp fibrillation and that this fraction remained in the structure during the hydrolysis of nanocellulose with cellulase mixture as well. Thus, a loosely bound fraction of xylan was predicted to have been more likely removed by purified xylanase. The presence of loosely bound xylan seemed to limit the hydrolysis of crystalline cellulose, indicated by an increase in cellulose crystallinity and by preserved crystal width measured with wide-angle X-ray scattering. Removing loosely bound xylan led to a proportional hydrolysis of xylan and cellulose with the cellulase mixture.

Synergistic action of xylanase and mannanase improves the total hydrolysis of softwood.

The impact of xylan and glucomannan hydrolysis on cellulose hydrolysis was studied on five pretreated softwood substrates with different xylan and glucomannan contents, both varying from 0.2% to 6.9%, using mixtures of purified enzymes. The supplementation of pure cellulase mixture with non-specific endoglucanase TrCel7B and xylanase TrXyn11 enhanced the hydrolysis of all substrates, except the steam pretreated spruce, by more than 50%. The addition of endo-ß-mannanase increased the overall hydrolysis yield by 20-25%, liberating significantly more glucose than theoretically present in glucomannan. When supplemented together, xylanolytic and mannanolytic enzymes acted synergistically with cellulases. Moreover, a linear correlation was observed between the hydrolysis of polysaccharides, irrespective of the composition, indicating that glucomannan and xylan form a complex network of polysaccharides around the cellulosic fibres extending throughout the lignocellulosic matrix. Both hemicellulolytic enzymes are crucial as accessory enzymes when designing efficient mixtures for the total hydrolysis of lignocellulosic substrates containing both hemicelluloses.

Large-area, lightweight and thick biomimetic composites with superior material properties via fast, economic, and green pathways.

Although remarkable success has been achieved to mimic the mechanically excellent structure of nacre in laboratory-scale models, it remains difficult to foresee mainstream applications due to time-consuming sequential depositions or energy-intensive processes. Here, we introduce a surprisingly simple and rapid methodology for large-area, lightweight, and thick nacre-mimetic films and laminates with superior material properties. Nanoclay sheets with soft polymer coatings are used as ideal building blocks with intrinsic hard/soft character. They are forced to rapidly self-assemble into aligned nacre-mimetic films via paper-making, doctor-blading or simple painting, giving rise to strong and thick films with tensile modulus of 45 GPa and strength of 250 MPa, that is, partly exceeding nacre. The concepts are environmentally friendly, energy-efficient, and economic and are ready for scale-up via continuous roll-to-roll processes. Excellent gas barrier properties, optical translucency, and extraordinary shape-persistent fire-resistance are demonstrated. We foresee advanced large-scale biomimetic materials, relevant for lightweight sustainable construction and energy-efficient transportation.

Characterization of Melanocarpus albomyces steryl esterase produced in Trichoderma reesei and modification of fibre products with the enzyme.

Melanocarpus albomyces steryl esterase STE1 is considered to be an interesting tool for several industrial applications due to its broad substrate specificity. STE1 was produced in the filamentous fungus Trichoderma reesei in a laboratory bioreactor at an estimated production level of 280 mg l(-l). The properties of the purified recombinant enzyme (rSTE1), such as substrate specificity, molecular mass, pH optimum and stability and thermostability, were characterized and compared to the corresponding properties of the native enzyme. Sodium dodecyl sulphate-polyacrylamide gel electrophoresis showed one band with a molecular weight of 60 kDa for rSTE1, whereas analytical gel filtration showed a dimeric structure with a molecular weight of 120 kDa. The rSTE1 was somewhat less stable under different conditions and had slightly lower activities on various substrates than the native STE1. The effects of rSTE1 on the properties of paper sheets and polyethylene terephthalate (PET) fabric were preliminarily evaluated. Due to the hydrolysis of triglycerides and steryl esters by the rSTE1 treatment, the tensile strength and hydrophilicity of the paper were increased. The rSTE1 treatment increased significantly the polarity of PET by hydrolysing the ester bonds in the polyester backbone. Dyeing of PET with methylene blue was also slightly improved after rSTE1 treatment.

Swollenin, a Trichoderma reesei protein with sequence similarity to the plant expansins, exhibits disruption activity on cellulosic materials.

Plant cell wall proteins called expansins are thought to disrupt hydrogen bonding between cell wall polysaccharides without hydrolyzing them. We describe here a novel gene with sequence similarity to plant expansins, isolated from the cellulolytic fungus Trichoderma reesei. The protein named swollenin has an N-terminal fungal type cellulose binding domain connected by a linker region to the expansin-like domain. The protein also contains regions similar to mammalian fibronectin type III repeats, found for the first time in a fungal protein. The swollenin gene is regulated in a largely similar manner as the T. reesei cellulase genes. The biological role of SWOI was studied by disrupting the swo1 gene from T. reesei. The disruption had no apparent effect on the growth rate on glucose or on different cellulosic carbon sources. Non-stringent Southern hybridization of Trichoderma genomic DNA with swo1 showed the presence of other swollenin-like genes, which could substitute for the loss of SWOI in the disruptant. The swollenin gene was expressed in yeast and Aspergillus niger var. awamori. Activity assays on cotton fibers and filter paper were performed with concentrated SWOI-containing yeast supernatant that disrupted the structure of the cotton fibers without detectable formation of reducing sugars. It also weakened filter paper as assayed by an extensometer. The SWOI protein was purified from A. niger var. awamori culture supernatant and used in an activity assay with Valonia cell walls. It disrupted the structure of the cell walls without producing detectable amounts of reducing sugars.