Topography of bent crystals with microradian resolution in one dimension.

Optimum performance in x-ray imaging and spectroscopy of plasmas with bent crystals is achievable only when the crystal reflects the x rays theoretically perfectly across its entire surface. However, typical thin quartz (101̄1) crystal samples kept flat by direct attachment to a flat substrate reflect 8 keV x rays differently across their surface, on a scale comparable to the ideal rocking curve. Additional processing improves the uniformity. Irradiation of flat crystals with collimated, monochromatic x rays in rocking curve topography shows such problems directly, with microradian resolution. Nonuniform x-ray reflection is more difficult to document for strongly bent crystals because, then, monochromatic, collimated x rays satisfy the Bragg condition only along a narrow stripe that may be too narrow to resolve with the available cameras. However, it can be resolved with a knife edge that moves through the reflected x rays with the necessary spatial precision as demonstrated here for a bent silicon crystal. This shows qualitatively similar imperfections in the reflection as flat quartz and as the bent quartz analyzers reported on previously with lower resolution.

Detailed diffraction imaging of x-ray optics crystals with synchrotron radiation.

Rocking curve topography at the Advanced Photon Source's beamline 1-BM measures the x-ray reflection from large (many cm2) flat crystals on a sub-mm scale with microradian angular resolution. The (011̄1) reflection at 8 keV is uniform across the crystal and close to theory for three thick quartz wafers well-polished with increasingly finer grit. However, the reflection is non-uniform for some ∼0.1 mm thin, bendable crystals that are made flat by optical contact with a flat substrate. These thin crystals are bent to serve in certain x-ray diagnostics of plasmas, and similar non-uniformities could then occur in bent crystals as well. The same detail in x-ray reflection in bent crystals is unachievable with the existing topography setup: One way to get the desired resolution is with a standard microfocusing approach.

Morphophysiological analysis of the salivary glands of Rhipicephalus sanguineus sensu lato (Acari: Ixodidae) exposed to ozonated water: A control strategy.

The tick Rhipicephalus sanguineus sensu lato has great medical and veterinary importance, mainly because the ability to transmit many diseases, causing harm to pets but also risks to public health. The blood spoliation and transmission of pathogens occur because of the immunosuppressive action of these ticks' saliva, a potent mixture of bioactive substances that is secreted by the salivary glands, one of the organs responsible for their biological success, and hence the target of studies for their control. Ozone has promise for use as an alternative acaricide, due to its proven efficiency in controlling agricultural and food pests, besides posing no risk of environmental contamination or to animal and human health. Therefore, this study evaluated the acaricidal potential of exposure of females of R. sanguineus s.l. to ozonated water at many concentrations and analysed the morphophysiological alterations of the salivary glands, employing histological and light microscopic techniques. The results demonstrated that the ozonated water at the concentrations investigated caused severe alterations in the salivary glands, bringing a new perspective for control of R. sanguineus s.l., through an ecologically correct method due to the absence of harm to non-target organisms and the environment.

On evaluating x-ray imaging crystals with synchrotron radiation.

Bent crystals used in diagnostics of plasmas combine x-rays diffracted from across the crystal. Therefore imperfections in the resulting 1-D spectrum or 2-D image are not the best way to find out why one particular crystal may differ in its performance from another and what, if anything, to do about it. Instead, here we want to measure the diffraction locally, with the necessary resolution. Nominally monochromatic and unidirectional radiation from the synchrotron's standard x-ray optics proved to be insufficient for the purpose. Here much better radiation comes from the x-ray topography setup at the x-ray optics testing beamline 1-BM at the Advanced Photon Source, thanks to a specially designed quartz conditioning crystal. Some worrisome features in a bent crystal's diffraction have thereby disappeared, while minor fabrication flaws remain highly visible.

Characterization of shaped Bragg crystal assemblies for narrowband x-ray imaging.

X-ray imaging using shaped crystals in Bragg reflection is a powerful technique used in high-energy-density physics experiments. The characterization of these crystal assemblies with conventional x-ray sources is very difficult because of the required angular resolution of the order of ∼10 µrad and the narrow bandwidth of the crystal. The 10-J, 1-ps Multi-Terawatt (MTW) laser at the Laboratory for Laser Energetics was used to characterize a set of Bragg crystal assemblies. The small spot size (of the order of 5 µm) and the high power (>1018 W/cm2) of this laser make it possible to measure the spatial resolution at the intended photon energy. A set of six crystals from two different vendors was checked on MTW, showing an unexpectedly large variation in spatial resolution of up to a factor of 4.

Note: Narrow x-ray reflections are easier to locate with sandpaper.

Synchrotrons can provide almost perfectly unidirectional and monochromatic x-rays. Such x-rays reflect from ideal crystals only over a minute part of the angular range that must be searched for the reflection. Spoiling the incoming x-rays' directionality with sandpaper makes it easier to find the reflection.

Spatially resolved single crystal x-ray spectropolarimetry of wire array z-pinch plasmas.

A recently developed single-crystal x-ray spectropolarimeter has been used to record paired sets of polarization-dependent and axially resolved x-ray spectra emitted by wire array z-pinches. In this measurement, two internal planes inside a suitable crystal diffract the x-rays into two perpendicular directions that are normal to each other, thereby separating incident x-rays into their linearly polarized components. This paper gives considerations for fielding the instrument on extended sources. Results from extended sources are difficult to interpret because generally the incident x-rays are not separated properly by the crystal. This difficulty is mitigated by using a series of collimating slits to select incident x-rays that propagate in a plane of symmetry between the polarization-splitting planes. The resulting instrument and some of the spatially resolved polarized x-ray spectra recorded for a 1-MA aluminum wire array z-pinch at the Nevada Terawatt Facility at the University of Nevada, Reno will be presented.

Quality of life after resection of a chordoma of the mobile spine.

AIMS: The aim of the study was to compare measures of the quality of life (QOL) after resection of a chordoma of the mobile spine with the national averages in the United States and to assess which factors influenced the QOL, symptoms of anxiety and depression, and coping with pain post-operatively in these patients. PATIENTS AND METHODS: A total of 48 consecutive patients who underwent resection of a primary or recurrent chordoma of the mobile spine between 2000 and 2015 were included. A total of 34 patients completed a survey at least 12 months post-operatively. The primary outcome was the EuroQol-5 Dimensions (EQ-5D-3L) questionnaire. Secondary outcomes were the Patient-Reported Outcome Measurement Information System (PROMIS) anxiety, depression and pain interference questionnaires. Data which were recorded included the indication for surgery, the region of the tumour, the number of levels resected, the status of the surgical margins, re-operations, complications, neurological deficit, length of stay in hospital and rate of re-admission. RESULTS: The median EQ-5D-3L score was 0.71 (interquartile range (IQR) 0.44 to 0.79) which is worse than the national average in the United States of 0.85 (p < 0.001). Anxiety (median: 55 (IQR 49 to 61), p = 0.031) and pain (median: 61 (IQR 56 to 68), p < 0.001) were also worse than the national average in the United States (50), while depression was not (median: 52 (IQR 38 to 57), p = 0.513). Patients who underwent a primary resection had better QOL and less anxiety, depression and pain compared with those who underwent resection for recurrent or residual disease. The one- and five-year probabilities were 0.96 and 0.74 for survival, 0.07 and 0.25 for tumour recurrence, and 0.02 and 0.16 for developing distant metastasis. A total of 25 local complications occurred in 20 patients (42%), and there were 50 systemic and other complications in 25 patients (52%) within 90 days. CONCLUSION: These patient reported outcomes and oncological and surgical outcomes can be used when counselling patients and to aid decision-making when planning surgery. Cite this article: Bone Joint J 2017;99-B:979-86.

What Factors are Associated With Quality Of Life, Pain Interference, Anxiety, and Depression in Patients With Metastatic Bone Disease?

BACKGROUND: It would be helpful for the decision-making process of patients with metastatic bone disease to understand which patients are at risk for worse quality of life (QOL), pain, anxiety, and depression. Normative data, and where these stand compared with general population scores, can be useful to compare and interpret results of similar patients or patient groups, but to our knowledge, there are no such robust data. QUESTIONS/PURPOSES: We wished (1) to assess what factors are independently associated with QOL, pain interference, anxiety, and depression in patients with metastatic bone disease, and (2) to compare these outcomes with general US population values. METHODS: Between November 2011 and February 2015, 859 patients with metastatic bone disease presented to our orthopaedic oncology clinic; 202 (24%) were included as they completed the EuroQOL-5 Dimension (EQ-5DTM), PROMIS® Pain Interference, PROMIS® Anxiety, and PROMIS® Depression questionnaires as part of a quality improvement program. We did not record reasons for not responding and found no differences between survey respondents and nonrespondents in terms of age (63 versus 64 years; p = 0.916), gender (51% men versus 47% men; p = 0.228), and race (91% white versus 88% white; p = 0.306), but survey responders were more likely to be married or living with a partner (72%, versus 62%; p = 0.001). We assessed risk factors for QOL, pain interference, anxiety, and depression using multivariable linear regression analysis. We used the one-sample signed rank test to assess whether scores differed from US population averages drawn from earlier large epidemiologic studies. RESULTS: Younger age (ß regression coefficient [ß], < 0.01; 95% CI, 0.00-0.01; p = 0.041), smoking (ß, -0.12; 95% CI, -0.22 to -0.01; p = 0.026), pathologic fracture (ß, -0.10; 95% CI, -0.18 to -0.02; p = 0.012), and being unemployed (ß, -0.09; 95% CI, -0.17 to -0.02; p = 0.017) were associated with worse QOL. Current smoking status was associated with more pain interference (ß, 6.0; 95% CI, 1.6-11; p = 0.008). Poor-prognosis cancers (ß, 3.8; 95% CI, 0.37-7.2; p = 0.030), and pathologic fracture (ß, 6.3; 95% CI, 2.5-7.2; p = 0.001) were associated with more anxiety. Being single (ß, 5.9; 95% CI, 0.83-11; p = 0.023), and pathologic fracture (ß, 4.4; 95% CI, 0.8-8.0; p = 0.017) were associated with depression. QOL scores (0.68 versus 0.85; p < 0.001), pain interference scores (65 versus 50; p < 0.001), and anxiety scores (53 versus 50; p = 0.011) were worse for patients with bone metastases compared with general US population values, whereas depression scores were comparable (48 versus 50; p = 0.171). CONCLUSIONS: Impending pathologic fractures should be treated promptly to prevent deterioration in QOL, anxiety, and depression. Our normative data can be used to compare and interpret results of similar patients or patient groups. Future studies could focus on specific cancers metastasizing to the bone, to further understand which patients are at risk for worse patient-reported outcomes. LEVEL OF EVIDENCE: Level III, prognostic study.

Spatial resolution of a spherical x-ray crystal spectrometer at various magnifications.

A high spatial resolution of a few µm is often required for probing small-scale high-energy-density plasmas using high resolution x-ray imaging spectroscopy. This resolution can be achieved by adjusting system magnification to overcome the inherent limitation of the detector pixel size. Laboratory experiments on investigating the relation between spatial resolution and system magnification for a spherical crystal spectrometer are presented. Tungsten Lß2 rays from a tungsten-target micro-focus x-ray tube were diffracted by a Ge 440 crystal, which was spherically bent to a radius of 223 mm, and imaged onto an x-ray CCD with 13-µm pixel size. The source-to-crystal (p) and crystal-to-detector (q) distances were varied to produce spatial magnifications (M = q/p) ranging from 2 to 10. The inferred instrumental spatial width reduces with increasing system magnification M. However, the experimental measurement at each M is larger than the theoretical value of pixel size divided by M. Future work will focus on investigating possible broadening mechanisms that limit the spatial resolution.

Spherical quartz crystals investigated with synchrotron radiation.

The quality of x-ray spectra and images obtained from plasmas with spherically bent crystals depends in part on the crystal's x-ray diffraction across the entire crystal surface. We employ the energy selectivity and high intensity of synchrotron radiation to examine typical spherical crystals from alpha-quartz for their diffraction quality, in a perpendicular geometry that is particularly convenient to examine sagittal focusing. The crystal's local diffraction is not ideal: the most noticeable problems come from isolated regions that so far have failed to correlate with visible imperfections. Excluding diffraction from such problem spots has little effect on the focus beyond a decrease in background.

Compact focusing spectrometer: visible (1 eV) to hard x-rays (200 keV).

A low-cost spectrometer that covers a wide range of photon energies can be useful to teach spectroscopy, and for simple, rapid measurements of the photon spectrum produced by small plasma devices. The spectrometer here achieves its wide range, nominally from 1 eV to 200 keV, with a series of spherically and cylindrically bent gratings or crystals that all have the same shape and the same radius of curvature; they are complemented by matching apertures and diagnostics on the Rowland circle that serves as the circular part of the spectrometer's vacuum vessel. Spectral lines are easily identified with software that finds their positions from the dispersion of each diffractive element and the known energies of the lines.

X-ray polarization splitting by a single crystal evaluated with synchrotron x-rays.

In hexagonal crystals such as quartz, an asymmetric Bragg reflection from two equivalent internal crystal planes can separate unpolarized x-rays into two linearly polarized components. The perfectly polarized and tunable x-rays from a synchrotron are ideal to evaluate polarization spitting in detail. One unanticipated feature is that additional reflections from the crystal affect the diffraction intensity of the two polarized components, an effect that is unlikely to matter in polarization spectroscopy of radiating plasmas for which the crystal is intended.

≃10 eV ionization shift in Ir Kα2 from a near-coincident Lu K-edge.

Close to an x-ray filter's K-edge the transmission depends strongly on the photon energy. For a few atom pairs, the K-edge of one is only a few tens of eV higher than a K-line energy of another, so that a small change in the line's energy becomes a measurable change in intensity behind such a matching filter. Lutetium's K-edge is ≃27 eV above iridium's Kα(2) line, ≃63.287 keV for cold Ir. A Lu filter reduces this line's intensity by ≃10 % when it is emitted by a plasma, indicating an ionization shift Δε≃10±1 eV.

A novel zirconium Kα imager for high energy density physics research.

We report on the development and characterization of a zirconium Kα imager for high energy density physics research. The imager consists of a spherically bent quartz crystal operating at 15.7 keV photon energy. We compare the performance of the imager in terms of integrated reflectivity (R(int)) and temperature dependent collection efficiency (η(Te)) to that of the widely used Cu Kα imager. Our collisional-radiative simulations show that the new imager can be reliably used up to 250 eV plasma temperature. Monte Carlo simulations show that for a 25 µm thick tracer layer of zirconium, the contribution to Kα production from photo-pumping is only 2%. We present, for the first time, 2D spatially resolved images of zirconium plasmas generated by a high intensity short pulse laser interacting with Zr solid targets.

K-line spectra from tungsten heated by an intense pulsed electron beam.

The plasma-filled rod-pinch diode (PFRP) is an intense source of x-rays ideal for radiography of dense objects. In the PRFP megavoltage electrons from a pulsed discharge concentrate at the pointed end of a 1 mm diameter tapered tungsten rod. Ionization of this plasma might increase the energy of tungsten's Kα(1) fluorescence line, at 59.3182 keV, enough for the difference to be observed by a high-resolution Cauchois transmission crystal spectrograph. When the PFRP's intense hard bremsstrahlung is suppressed by the proper shielding, such an instrument gives excellent fluorescence spectra, albeit with as yet insufficient resolution to see any effect of tungsten's ionization. Higher resolution is possible with various straightforward upgrades that are feasible thanks to the radiation's high intensity.

Megavoltage bremsstrahlung end point voltage diagnostic.

In a material, a beam of x rays is accompanied by various kinds of secondary radiation, including Compton electrons from collisions between the x rays and the material's electrons. For megavoltage bremsstrahlung in air, many of these Compton electrons are forward-directed and fast enough to be deflected outside the beam's edge by a magnetic field perpendicular to the beam. At the beam's edge, the dose from the deflected Compton electrons has a pattern that depends on the radiation's end point energy. Dose patterns measured with radiochromic film on a nominally 1 and 2 MV linear accelerator agree reasonably well with the corresponding Monte Carlo computations. With further development, the dose pattern produced outside the beam by such a sweeper magnet could become a noninvasive way to monitor megavoltage bremsstrahlung, when the end point energies are difficult to determine with other methods.

Strengthened lithium for x-ray blast windows.

Lithium's high x-ray transparency makes it an attractive material for windows intended to protect soft x-ray diagnostics in high energy density experiments. Pure lithium is soft and weak, but lithium mixed with lithium hydride powder becomes harder and stronger, in principle without any additional x-ray absorption. A comparison with the standard material for x-ray windows, beryllium, suggests that lithium or lithium strengthened by lithium hydride may well be an excellent option for such windows.