Pullulan-Graft-Polyoxazoline: Approaches from Chemistry and Physics.

An approach to the preparation of pullulan-graft-poly(2-methyl-2-oxazoline)s based on Cu-catalyzed azide-alkyne cycloaddition with polyoxazoline-azide was applied. All of the obtained polymers were characterized through classical molecular hydrodynamic methods and NMR. The formation of graft copolymers was accomplished by oxidative degradation of pullulan chains. Nevertheless, graft copolymers were obtained as uniform products with varied side chain lengths and degrees of substitution.

Hydrodynamic Characteristics and Conformational Parameters of Ferrocene-Terpyridine-Based Polymers.

Nowadays, the study of metallopolymers is one of the fastest growing areas of polymer science. Metallopolymers have great potential for application in multiple technological and various biomedical processes. The macromolecules with the possibility of varying the number and type of metal ions along the entire length of the polymer chain are of particular interest. In this regard, this study presents results on two successfully synthesized homopolymers, random and block copolymers based on PMMA, containing ferrocene and terpyridine moieties in the side chain. Different architectures of copolymers may attribute interesting properties when creating complexes with various metal ions. A detailed hydrodynamic study of these structures was carried out, the consistency of hydrodynamic data was established using the concept of a hydrodynamic invariant, the absolute values of the molar masses of the studied objects were calculated, and the conformational parameters of macromolecules were determined. Using the Fixman-Stockmayer theory, the equilibrium rigidities of the studied systems were calculated and the relationship between the chemical structure and conformational characteristics was established. The studied copolymers can be attributed to the class of flexible-chain macromolecules. An increase in the equilibrium rigidity value with an increase of the side chain, which is characteristic of comb-shaped polymers, was determined.

Metallo-Supramolecular Complexation Behavior of Terpyridine- and Ferrocene-Based Polymers in Solution-A Molecular Hydrodynamics Perspective.

The contribution deals with the synthesis of the poly(methacrylate)-based copolymers, which contain ferrocene and/or terpyridine moieties in the side chains, and the subsequent analysis of their self-assembly behavior upon supramolecular/coordination interactions with Eu3+ and Pd2+ ions in dilute solutions. Both metal ions provoke intra and inter molecular complexation that results in the formation of large supra-macromolecular assembles of different conformation/shapes. By applying complementary analytical approaches (i.e., sedimentation-diffusion analysis in the analytical ultracentrifuge, dynamic light scattering, viscosity and density measurements, morphology studies by electron microscopy), a map of possible conformational states/shapes was drawn and the corresponding fundamental hydrodynamic and macromolecular characteristics of metallo-supramolecular assemblies at various ligand-to-ion molar concentration ratios (M/L) in extremely dilute polymer solutions (c[η]≈0.006) were determined. It was shown that intramolecular complexation is already detected at (L≈0.1), while at M/L>0.5 solution/suspension precipitates. Extreme aggregation/agglomeration behavior of such dilute polymer solutions at relatively "high" metal ion content is explained from the perspective of polymer-solvent and charge interactions that will accompany the intramolecular complexation due to the coordination interactions.

Revisiting very disperse macromolecule populations in hydrodynamic and light scattering studies of sodium carboxymethyl celluloses.

One of the most abundant natural macromolecule, cellulose, is of high importance in technological research including medicine, energy application platforms, and many more. One of its most important ionic derivatives, sodium carboxymethyl cellulose, is known to be very disperse and heterogeneous. The experimental robustness of the methods of hydrodynamics and light scattering are put to test by studying these highly disperse, charged, and heterogeneous macromolecule populations. The following opportunities for molar mass estimations from experimental data were taken into consideration: (i) from the classical Svedberg equation, (ii) from size exclusion chromatography coupled to multi-angle laser light scattering, (iii) from the hydrodynamic invariant, and (iv) the sedimentation parameter. The orthogonality of such approach demonstrates a statistically robust assessment of chain conformational and chain dimensional characteristics of macromolecule populations. Quantitative comparison between the absolute techniques indicates that those have to be checked for accuracy of the obtained and derived characteristics.

Star-Shaped Poly(2-ethyl-2-oxazoline) and Poly(2-isopropyl-2-oxazoline) with Central Thiacalix[4]Arene Fragments: Reduction and Stabilization of Silver Nanoparticles.

The interaction of silver nitrate with star-shaped poly(2-ethyl-2-oxazoline) and poly(2-isopropyl-2-oxazoline) containing central thiacalix[4]arene cores, which proceeds under visible light in aqueous solutions at ambient temperature, was studied. It was found that this process led to the formation of stable colloidal solutions of silver nanoparticles. The kinetics of the formation of the nanoparticles was investigated by the observation of a time-dependent increase in the intensity of the plasmon resonance peak that is related to the nanoparticles and appears in the range of 400 to 700 nm. According to the data of electron and X-ray spectroscopy, scanning and transmission electron microscopy, X-ray diffraction analysis, and dynamic light scattering, the radius of the obtained silver nanoparticles is equal to 30 nm. In addition, the flow birefringence experiments showed that solutions of nanoparticles have high optical shear coefficients.

Functionalization of polyacrylamide for nanotrapping positively charged biomolecules.

Engineering new materials which are capable of trapping biomolecules in nanoscale quantities, is crucial in order to achieve earlier diagnostics in different diseases. This article demonstrates that using free radical copolymerization, polyacrylamide can be successfully functionalized with specific synthons for nanotrapping positively charged molecules, such as numerous proteins, through electrostatic interactions due to their negative charge. Specifically, two functional random copolymers, acrylamide/acrylic acid (1) and acrylamide/acrylic acid/N-(pyridin-4-yl-methyl)acrylamide (2), whose negative net charges differ in their water solutions, were synthetized and their ability to trap positively charged proteins was studied using myoglobin as a proof-of-concept example. In aqueous solutions, copolymer 1, whose net charge for a 100 chain fragment (Q pH 6/M) is -1.323 × 10-3, interacted with myoglobin forming a stable monodisperse nanosuspension. In contrast, copolymer 2, whose value of Q pH 6/M equals -0.361 × 10-3, was not able to form stable particles with myoglobin. Nevertheless, thin films of both copolymers were grown using a dewetting process, which exhibited nanoscale cavities capable of trapping different amounts of myoglobin, as demonstrated by bimodal AFM imaging. The simple procedures used to build protein traps make this engineering approach promising for the development of new materials for biomedical applications where trapping biomolecules is required.

Hydrodynamic Analysis Resolves the Pharmaceutically-Relevant Absolute Molar Mass and Solution Properties of Synthetic Poly(ethylene glycol)s Created by Varying Initiation Sites.

The solution behavior originating from molecular characteristics of synthetic macromolecules plays a pivotal role in many areas, in particular the life sciences. This situation necessitates the use of complementary hydrodynamic analytical methods as the only means for a complete structural understanding of any macromolecule in solution. To this end, we present a combined hydrodynamic approach for studying in-house prepared, low dispersity poly(ethylene glycols)s (PEGs), also known as poly(ethylene oxide)s (PEOs) depending on the classification used, synthesized from varying initiation sites by the living anionic ring opening polymerization. The series of linear PEGs in the molar mass range of only a few thousand to 50 000 g mol-1 have been studied in detail via viscometry and sedimentation-diffusion analysis by analytical ultracentrifugation. The obtained estimations for intrinsic viscosity, diffusion coefficients, and sedimentation coefficients of the macromolecules in the solution-based analysis clearly showed self-consistency of the followed hydrodynamic approach. This self-consistency is underpinned by appropriate and physically sound values of hydrodynamic invariants, indicating adequate values of derived absolute molar masses. The classical scaling relations of Kuhn-Mark-Houwink-Sakurada of all molar-mass dependent hydrodynamic estimates show linear trends, allowing for interrelation of all parametric macromolecular characteristics. Differences among these are ascribed to the observation of α-end and chain-length dependent solvation of the macromolecules, identified from viscometric studies. This important information allows for analytical tracing of variations of scaling relationships and a physically sound estimation of hydrodynamic characteristics. The demonstrated self-sufficient methodology paves an important way for a complete structural understanding and potential replacement of pharmaceutically relevant PEGs by alternative macromolecules offering a suite of similar or tractably distinct physicochemical properties.

Model system for multifunctional delivery nanoplatforms based on DNA-Polymer complexes containing silver nanoparticles and fluorescent dye.

Creation of multifunctional nanoplatforms is one of the new approaches to complex treatment and diagnosis with the monitoring of the curative process. Inclusion of various components into the drug delivery system may reduce toxicity and enhance or modify the therapeutic effects of medicines. In particular, some properties of metal nanoparticles and nanoclusters provide the ability to create new systems for treatment and diagnosis of diseases, biocatalysis and imaging of objects. For example, the ability of metal nanoparticles to enhance the quantum yield of luminescence can be used in bioimaging and therapy. The aim of the research was to construct and examine a multicomponent system based on DNA-polycation compact structure with the inclusion of silver nanoparticles and luminescent dye as a model system for delivery of genes and drugs with the possibility of modification and enhancement of their action.

Biodistribution of size-selected lyophilisomes in mice.

Lyophilisomes are a novel class of proteinaceous biodegradable nano/microparticle capsules developed for tumor drug delivery. The in vivo characteristics of lyophilisomes are unknown and, therefore, the time course of biodistribution of sized albumin-based lyophilisomes in CD1 mice after intravenous administration was studied. Lyophilisomes, prepared from Dylight680-labeled albumin, were sized using a sucrose gradient centrifugation methodology and four fractions with a mean size of approximately 200nm, 400nm, 550nm, and 650nm were pooled for in/ex vivo localization, (immuno)histochemistry and biochemical analysis. Lyophilisomes were rapidly taken out of the circulation by the liver and spleen. Immunohistochemistry revealed that lyophilisomes were taken up in the liver by F4/80 positive macrophages, and in the spleen by Sign-R1 positive macrophages specifically located in the marginal zones. Lyophilisomes were most likely degraded by the liver and spleen and subsequently excreted via the urine, as high levels of degraded Dylight680-labeled albumin were detected in the urine. This was corroborated by electron microscopy of the spleen, which showed intact lyophilisomes in the marginal zone 5 and 30min after injection, but not after 2h. In conclusion, IV injected lyophilisomes are rapidly entrapped by liver and splenic macrophages, biodegraded, and excreted in the urine.

Polyelectrolyte complexes of DNA and linear PEI: formation, composition and properties.

In the present study, the complexation between linear 13.4 kDa poly(ethylene imine) (LPEI) and plasmid DNA was investigated. Analytical ultracentrifugation (AUC) was used for size and molar mass determination. Additionally, the morphology was studied by scanning force microscopy. The polyplex formation was investigated in a wide range of PEI nitrogen to DNA phosphate ratios (N/P). At N/P ratios below 1, the PEI/DNA complex formation is characterized by an incomplete DNA condensation and the formation of the primary DNA/PEI complexes. The merging of the initially formed polyplexes occurs at N/P ~2, resulting in the formation of polyplexes with much larger size and high aggregation rate. Stable and uniform polyplexes were formed at N/P > 10, with average sizes of the polyplexes of about 170 ± 65 nm. The content of uncomplexed PEI chains in the polyplex dispersion was estimated at four different N/P ratios, 6.2, 11.6, 28.6, and 57.8, by combining preparative centrifugation with a copper complex assay and by sedimentation velocity analysis as an alternative method. It is demonstrated that virtually all added PEI binds to the DNA at N/P < 2.5; further addition of PEI results in the appearance of a large amount of free PEI in solution. Nevertheless, PEI is able to bind in the whole range of N/P ratios tested. According to the data collected by sedimentation velocity analysis and scanning force microscopy, the single PEI/DNA complexes are composed on average of 8 to 32 single condensed DNA plasmids and 70 ± 25 PEI molecules.

Preparation, cellular internalization, and biocompatibility of highly fluorescent PMMA nanoparticles.

Methacrylate monomers were functionalized with a 4-hydroxythiazole chromophore and copolymerized with methyl methacrylate via RAFT. Nanoparticles of 120 and 500 nm in size were prepared without using stabilizers/surfactants. For comparative studies, preparative ultracentrifugation was applied for the separation into small and large particle fractions. All suspensions were characterized by DLS, AUC, and SEM and tested regarding their stability during centrifugation and re-suspension, autoclavation, and incubation in cell culture media. In vitro studies with mouse fibroblast cell line and differently sized NP showed a particle uptake into cells. Biocompatibility, non-toxicity, and hemocompatibility were demonstrated using a XTT assay, a live/dead staining, and an erythrocyte aggregation and hemolysis assay.

Conformation parameters of linear macromolecules from velocity sedimentation and other hydrodynamic methods.

Linear macromolecules constitute a broad class of synthetic and natural polymers which are highly useful in various technologies and represent the key molecular systems in living nature. The study of the molecular characteristics of these polymers represents an important problem in fundamental and applied science. The methods of molecular hydrodynamics have been and remain an important way of studying the molar mass, molar mass distribution, size and conformation of linear polymers. This paper discusses the approaches to the problems of hydrodynamic methods, in particular analytical velocity ultracentrifugation, in the study of various types of linear macromolecule. The velocity sedimentation data were processed with three different methods: Sedanal and Sedfit software, and the classical approach of evaluating the rate at which the sedimentation boundary moves. The Sedfit program also allows an evaluation of the frictional ratio values, i.e., the coefficient of translational diffusion. It will be discussed for which systems the estimation of the frictional ratio obtained by Sedfit is adequate and for which it is not. The applications of other hydrodynamic methods (intrinsic viscosity, translational diffusion) are also discussed with a view to obtaining the conformational characteristics of linear macromolecules.