Linear Polyethyleneimine-Based and Metal Organic Frameworks (DUT-67) Composite Hydrogels as Efficient Sorbents for the Removal of Methyl Orange, Copper Ions, and Penicillin V.

This research explores the integration of DUT-67 metal organic frameworks into polyethyleneimine-based hydrogels to assemble a composite system with enough mechanical strength, pore structure and chemical affinity to work as a sorbent for water remediation. By varying the solvent-to-modulator ratio in a water-based synthesis path, the particle size of DUT-67 was successfully modulated from 1 µm to 200 nm. Once DUT-67 particles were integrated into the polymeric hydrogel, the composite hydrogel exhibited enhanced mechanical properties after the incorporation of the MOF filler. XPS, NMR, TGA, FTIR, and FT Raman studies confirmed the presence and interaction of the DUT-67 particles with the polymeric chains within the hydrogel network. Adsorption studies of methyl orange, copper(II) ions, and penicillin V on the composite hydrogel revealed a rapid adsorption kinetics and monolayer adsorption according to the Langmuir's model. The composite hydrogel demonstrated higher adsorption capacities, as compared to the pristine hydrogel, showcasing a synergistic effect, with maximum adsorption capacities of 473 ± 21 mg L-1, 86 ± 6 mg L-1, and 127 ± 4 mg L-1, for methyl orange, copper(II) ions, and penicillin V, respectively. This study highlights the potential of MOF-based composite hydrogels as efficient adsorbents for environmental pollutants and pharmaceuticals.

Development of Silver Nanoparticles/Gelatin Thermoresponsive Nanocomposites: Characterization and Antimicrobial Activity.

BACKGROUND: Skin and soft tissue infections involve microbial invasion of the skin and underlying soft tissues. To overcome this problem, nanocomposites were obtained using gelatin as a biopolymer scaffold and silver nanoparticles as a wide spectrum antimicrobial agent. Water and glycerol have been used as solvents for the gelatin hydrogel synthesis. This mixture led to a stable and homogeneous biomaterial with improved mechanical properties. METHODS: Silver nanoparticles were characterized using SEM, EDS and TEM. Moreover, the AgNp/gelatin nanocomposite obtained using these nanoparticles was characterized using SEM and FTIR. Moreover, mechanical and swelling properties were studied. RESULTS: The storage modulus was 3000 Pa for gelatin hydrogels and reached 5800 Pa for AgNp/gelatin nanocomposite. Silver nanoparticles have been studied as an alternative to antibiotics. Importantly, the rate of silver release was modulated as a function of the temperature of the nanocomposite. Thus, the silver release from the nanocomposites at 24 °C and 38 °C was analyzed by atomic absorption spectroscopy. The silver release reached 25% after 24 h at 24 °C, while a 75% release was achieved at 38°C in the same period, showing the material thermoresponsive behavior. AgNp/gelatin nanocomposite showed a deleterious effect over 99.99% of Pseudomonas aeruginosa and Staphylococcus aureus, leading to a material with antimicrobial properties. CONCLUSION: AgNp/gelatin nanocomposite with improved mechanical properties and silver nanoparticles as a source of silver ions has been synthesized. The properties of the nanocomposite with controlled silver delivery result in a more efficient topical pharmaceutical form for wound healing applications.

Dodecenylsuccinic anhydride modified collagen hydrogels loaded with simvastatin as skin wound dressings.

Skin wound healing presents a unique challenge because of its complex healing process. Herein, we developed a hydrophobic wound dressing to incorporate simvastatin, which has potential application in the treatment of ulcers and prevention of wound infection. For that matter, collagen hydrogels were grafted with dodecenylsuccinic anhydride (DDSA). The chemical modification was confirmed by FTIR and solid state 13 C-NMR spectroscopies while the ultrastructure was observed by scanning electron microscope (SEM) images. In contact angle measurements, a higher water droplet angle in DDSA-collagen gels was observed. This was consistent with the swelling assay, in which water absorption was 5.2 g/g for collagen and 1.9 g/g for DDSA-collagen. Additionally, viability and adhesion studies were performed. Cell adhesion decreased ~11% in DDSA-collagen and the number of viable cells showed a tendency to decrease as DDSA concentration increased but it was only significantly lower above concentrations of 12%. Modified gels were loaded with simvastatin showing higher adsorption capacity and lower release. Lastly, the antimicrobial and anti-inflammatory activity of DDSA-collagen materials were assessed. DDSA-collagen hydrogels, either unloaded or loaded with simvastatin showed sustained antimicrobial activity against Pseudomonas aeruginosa and Staphylococcus aureus for 72 hr probably due to the hydrophobic interaction of DDSA chains with bacterial cell walls. The antimicrobial activity was stronger against S. aureus. Collagen hydrogels also presented a prolonged antibacterial activity when they were loaded with simvastatin, confirming the antimicrobial properties of statins. Finally, it was observed that these materials can stimulate resident macrophages and promote an M2 profile which is desirable in wound healing processes.

Smart release of antimicrobial ZnO nanoplates from a pH-responsive keratin hydrogel.

A smart antibacterial biomaterial based on a keratin hydrogel with pH-dependent behavior and Zinc Oxide nanoplates as biocide agent has been developed. The pH of a chronic wound is basic due to bacterial metabolism. Originally shrank at acid pH, keratin hydrogels swell upon contact with a bacterial contaminated media leading to the release of the nanoparticles. The material has been thoroughly characterized by infrared spectroscopy, Raman, scanning electron microscope, swelling behavior, Differential scanning calorimetry, Small-angle X-ray scattering, rheology, antimicrobial activity and cytotoxicity. The results show that 5% of Zinc Oxide nanoparticles concentration is the optimum for wound dressing applications.

Depth-profiling by confocal Raman microscopy (CRM): data correction by numerical techniques.

The data obtained in confocal Raman microscopy (CRM) depth profiling experiments with dry optics are subjected to significant distortions, including an artificial compression of the depth scale, due to the combined influence of diffraction, refraction, and instrumental effects that operate on the measurement. This work explores the use of (1) regularized deconvolution and (2) the application of simple rescaling of the depth scale as methodologies to obtain an improved, more precise, confocal response. The deconvolution scheme is based on a simple predictive model for depth resolution and the use of regularization techniques to minimize the dramatic oscillations in the recovered response typical of problem inversion. That scheme is first evaluated using computer simulations on situations that reproduce smooth and sharp sample transitions between two materials and finally it is applied to correct genuine experimental data, obtained in this case from a sharp transition (planar interface) between two polymeric materials. It is shown that the methodology recovers very well most of the lost profile features in all the analyzed situations. The use of simple rescaling appears to be only useful for correcting smooth transitions, particularly those extended over distances larger than those spanned by the operative depth resolution, which limits the strategy to the study of profiles near the sample surface. However, through computer simulations, it is shown that the use of water immersion objectives may help to reduce optical distortions and to expand the application window of this simple methodology, which could be useful, for instance, to safely monitor Fickean sorption/desorption of penetrants in polymer films/coatings in a nearly noninvasive way.

Bilateral ethmoidal dural arteriovenous fistula: unexpected surgical diagnosis.

Dural arteriovenous fistulae (DAVFs) are infrequent lesions, the most common locations of which are the cavernous, sigmoid and transverse sinuses. The cribiform plate is one of the less frequent sites for DAVFs, where they entail a high hemorrhage risk. Feeding arteries for ethmoidal DAVFs can be uni- or bilateral. However, the draining fistulous system has classically been described as unilateral. The authors report the second case in literature of bilateral ethmoidal DAVF, which is defined as that with bilateral draining veins. The present case was diagnosed only after surgical exploration of both cribiform plates. No preoperative radiological test could detect the presence of a bilateral venous draining system from the ethmoidal DAVF. Possible reasons for that lack of presurgical diagnosis are discussed. Bilateral surgical exploration of the anterior cranial fossa is recommended when dealing with ethmoidal DAVFs, even when they seem to be unilateral on preoperative studies.