Identification of agro-physiological traits of lentil that reduce risks of drought.

Ideotype breeding is an essential approach for selection of desired combination of plant traits for testing in crop growth model for potential yield gain in specific environments and management practices. Here we parameterized plant traits for untested lentil cultivars for the APSIM-lentil model in phenology, biomass, and seed yield. We then tested these against independent data and applied the model in an extrapolated analysis (i) to assess the impact of drought on productivity across different rainfall environments; (ii) to identify impactful plant traits and (iii) to design new lentil ideotypes with a combination of desirable traits that mitigate the impact of drought, in the context of various agronomic practices across a wide range of production environments. Desirable phenological and physiological traits related to yield were identified with RUE having the greatest effect on yield followed by HI rate. Leaf size significantly affected seed yield (p< 0.05) more than phenological phases. The physiological traits were integrated into four ideotype designs applied to two baseline cultivars (PBA Hallmark XT and PBA Jumbo2) providing eight ideotypes. We identified a combination of genetic traits that promises a yield advantage of around 10% against our current cultivars PBA Hallmark XT and PBA Jumbo2. Under drought conditions, our ideotypes achieved 5 to 25% yield advantages without stubble and 20 to 40% yield advantages with stubble residues. This shows the importance of genetic screening under realistic production conditions (e.g., stubble retention in particular environments). Such screening is aided by the employment of biophysical models that incorporate both genetic and agronomic variables that focus on successful traits in combination, to reduce the impact of drought in the development of new cultivars for various environments. Stubble retention was found to be a major agronomic contributor to high yield in water-limiting environments and this contribution declined with increasing growing season rainfall. In mid- and high-rainfall environments, the key drivers of yield were time of sowing, physiological traits and soil type. Overall, the agronomic practices, namely, early sowing, residue retention and narrow row spacing deceased the impact of drought when combined with improved physiological traits of the ideotypes based on long term climate data.

Breeding has selected for architectural and photosynthetic traits in lentils.

Genetic progress in seed yield in lentils (Lens culinaris Medik) has increased by 1.1% per year in Australia over the past 27 years. Knowing which plant traits have changed through breeding during this time can give important insights as to how lentil yield has increased. This study aims to identify morphological and physiological traits that were directly or indirectly selected between 1993 and 2020 in the Australian lentil breeding program using 2 years of experimental data. Major changes occurred in plant architecture during this period. Divergent selection has seen the release of varieties that have sprawling to very upright types of canopies. Despite this genetic diversity in recently released varieties, there is an overall tendency of recently released varieties having increased plant height and leaf size with reduced number of branches. Increased light interception was positively correlated with year of release (YOR) and yield, and likely results from indirect selection of yield and taller plant types. There is an indication that recently released varieties have lower CO2 assimilation rate, stomatal conductance and canopy temperature depression (CTD) at high ambient temperatures (~30°C). Understanding lentil physiology will assist in identifying traits to increase yield in a changing climate with extreme weather events.

Mining for allelic gold: finding genetic variation in photosynthetic traits in crops and wild relatives.

Improvement of photosynthetic traits in crops to increase yield potential and crop resilience has recently become a major breeding target. Synthetic biology and genetic technologies offer unparalleled opportunities to create new genetics for photosynthetic traits driven by existing fundamental knowledge. However, large 'gene bank' collections of germplasm comprising historical collections of crop species and their relatives offer a wealth of opportunities to find novel allelic variation in the key steps of photosynthesis, to identify new mechanisms and to accelerate genetic progress in crop breeding programmes. Here we explore the available genetic resources in food and fibre crops, strategies to selectively target allelic variation in genes underpinning key photosynthetic processes, and deployment of this variation via gene editing in modern elite material.

Wheat physiology predictor: predicting physiological traits in wheat from hyperspectral reflectance measurements using deep learning.

BACKGROUND: The need for rapid in-field measurement of key traits contributing to yield over many thousands of genotypes is a major roadblock in crop breeding. Recently, leaf hyperspectral reflectance data has been used to train machine learning models using partial least squares regression (PLSR) to rapidly predict genetic variation in photosynthetic and leaf traits across wheat populations, among other species. However, the application of published PLSR spectral models is limited by a fixed spectral wavelength range as input and the requirement of separate custom-built models for each trait and wavelength range. In addition, the use of reflectance spectra from the short-wave infrared region requires expensive multiple detector spectrometers. The ability to train a model that can accommodate input from different spectral ranges would potentially make such models extensible to more affordable sensors. Here we compare the accuracy of prediction of PLSR with various deep learning approaches and an ensemble model, each trained and tested using previously published data sets. RESULTS: We demonstrate that the accuracy of PLSR to predict photosynthetic and related leaf traits in wheat can be improved with deep learning-based and ensemble models without overfitting. Additionally, these models can be flexibly applied across spectral ranges without significantly compromising accuracy. CONCLUSION: The method reported provides an improved prediction of wheat leaf and photosynthetic traits from leaf hyperspectral reflectance and do not require a full range, high cost leaf spectrometer. We provide a web service for deploying these algorithms to predict physiological traits in wheat from a variety of spectral data sets, with important implications for wheat yield prediction and crop breeding.

Contact transfer of engineered nanomaterials in the workplace.

This study investigates the potential spread of cadmium selenide quantum dots in laboratory environments through contact of gloves with simulated dry spills on laboratory countertops. Secondary transfer of quantum dots from the contaminated gloves to other substrates was initiated by contact of the gloves with different materials found in the laboratory. Transfer of quantum dots to these substrates was qualitatively evaluated by inspection under ultraviolet illumination. This secondary contact resulted in the delivery of quantum dots to all the evaluated substrates. The amount of quantum dots transferred was quantified by elemental analysis. The residue containing quantum dots picked up by the glove was transferred to at least seven additional sections of the pristine substrate through a series of sequential contacts. These results demonstrate the potential for contact transfer as a pathway for spreading nanomaterials throughout the workplace, and that 7-day-old dried spills are susceptible to the propagation of nanomaterials by contact transfer. As research and commercialization of engineered nanomaterials increase worldwide, it is necessary to establish safe practices to protect workers from the potential for chronic exposure to potentially hazardous materials. Similar experimental procedures to those described herein can be adopted by industries or regulatory agencies to guide the development of their nanomaterial safety programmes.

Pulse Root Ideotype for Water Stress in Temperate Cropping System.

Pulses are a key component of crop production systems in Southern Australia due to their rotational benefits and potential profit margins. However, cultivation in temperate cropping systems such as that of Southern Australia is limited by low soil water availability and subsoil constraints. This limitation of soil water is compounded by the irregular rainfall, resulting in the absence of plant available water at depth. An increase in the productivity of key pulses and expansion into environments and soil types traditionally considered marginal for their growth will require improved use of the limited soil water and adaptation to sub soil constrains. Roots serve as the interface between soil constraints and the whole plant. Changes in root system architecture (RSA) can be utilised as an adaptive strategy in achieving yield potential under limited rainfall, heterogenous distribution of resources and other soil-based constraints. The existing literature has identified a "'Steep, Deep and Cheap" root ideotype as a preferred RSA. However, this idiotype is not efficient in a temperate system where plant available water is limited at depth. In addition, this root ideotype and other root architectural studies have focused on cereal crops, which have different structures and growth patterns to pulses due to their monocotyledonous nature and determinant growth habit. The paucity of pulse-specific root architectural studies warrants further investigations into pulse RSA, which should be combined with an examination of the existing variability of known genetic traits so as to develop strategies to alleviate production constraints through either tolerance or avoidance mechanisms. This review proposes a new model of root system architecture of "Wide, Shallow and Fine" roots based on pulse roots in temperate cropping systems. The proposed ideotype has, in addition to other root traits, a root density concentrated in the upper soil layers to capture in-season rainfall before it is lost due to evaporation. The review highlights the potential to achieve this in key pulse crops including chickpea, lentil, faba bean, field pea and lupin. Where possible, comparisons to determinate crops such as cereals have also been made. The review identifies the key root traits that have shown a degree of adaptation via tolerance or avoidance to water stress and documents the current known variability that exists in and amongst pulse crops setting priorities for future research.

Photons to food: genetic improvement of cereal crop photosynthesis.

Photosynthesis has become a major trait of interest for cereal yield improvement as breeders appear to have reached the theoretical genetic limit for harvest index, the mass of grain as a proportion of crop biomass. Yield improvements afforded by the adoption of green revolution dwarfing genes to wheat and rice are becoming exhausted, and improvements in biomass and radiation use efficiency are now sought in these crops. Exploring genetic diversity in photosynthesis is now possible using high-throughput techniques, and low-cost genotyping facilitates discovery of the genetic architecture underlying this variation. Photosynthetic traits have been shown to be highly heritable, and significant variation is present for these traits in available germplasm. This offers hope that breeding for improved photosynthesis and radiation use efficiency in cereal crops is tractable and a useful shorter term adjunct to genetic and genome engineering to boost yield potential.

Genetic variation for photosynthetic capacity and efficiency in spring wheat.

One way to increase yield potential in wheat is screening for natural variation in photosynthesis. This study uses measured and modelled physiological parameters to explore genotypic diversity in photosynthetic capacity (Pc, Rubisco carboxylation capacity per unit leaf area at 25 °C) and efficiency (Peff, Pc per unit of leaf nitrogen) in wheat in relation to fertilizer, plant stage, and environment. Four experiments (Aus1, Aus2, Aus3, and Mex1) were carried out with diverse wheat collections to investigate genetic variation for Rubisco capacity (Vcmax25), electron transport rate (J), CO2 assimilation rate, stomatal conductance, and complementary plant functional traits: leaf nitrogen, leaf dry mass per unit area, and SPAD. Genotypes for Aus1 and Aus2 were grown in the glasshouse with two fertilizer levels. Genotypes for Aus3 and Mex1 experiments were grown in the field in Australia and Mexico, respectively. Results showed that Vcmax25 derived from gas exchange measurements is a robust parameter that does not depend on stomatal conductance and was positively correlated with Rubisco content measured in vitro. There was significant genotypic variation in most of the experiments for Pc and Peff. Heritability of Pc reached 0.7 and 0.9 for SPAD. Genotypic variation and heritability of traits show that there is scope for these traits to be used in pre-breeding programmes to improve photosynthesis with the ultimate objective of raising yield potential.

Predicting dark respiration rates of wheat leaves from hyperspectral reflectance.

Greater availability of leaf dark respiration (Rdark ) data could facilitate breeding efforts to raise crop yield and improve global carbon cycle modelling. However, the availability of Rdark data is limited because it is cumbersome, time consuming, or destructive to measure. We report a non-destructive and high-throughput method of estimating Rdark from leaf hyperspectral reflectance data that was derived from leaf Rdark measured by a destructive high-throughput oxygen consumption technique. We generated a large dataset of leaf Rdark for wheat (1380 samples) from 90 genotypes, multiple growth stages, and growth conditions to generate models for Rdark . Leaf Rdark (per unit leaf area, fresh mass, dry mass or nitrogen, N) varied 7- to 15-fold among individual plants, whereas traits known to scale with Rdark , leaf N, and leaf mass per area (LMA) only varied twofold to fivefold. Our models predicted leaf Rdark , N, and LMA with r2 values of 0.50-0.63, 0.91, and 0.75, respectively, and relative bias of 17-18% for Rdark and 7-12% for N and LMA. Our results suggest that hyperspectral model prediction of wheat leaf Rdark is largely independent of leaf N and LMA. Potential drivers of hyperspectral signatures of Rdark are discussed.

Hyperspectral reflectance as a tool to measure biochemical and physiological traits in wheat.

Improving photosynthesis to raise wheat yield potential has emerged as a major target for wheat physiologists. Photosynthesis-related traits, such as nitrogen per unit leaf area (Narea) and leaf dry mass per area (LMA), require laborious, destructive, laboratory-based methods, while physiological traits underpinning photosynthetic capacity, such as maximum Rubisco activity normalized to 25 °C (Vcmax25) and electron transport rate (J), require time-consuming gas exchange measurements. The aim of this study was to assess whether hyperspectral reflectance (350-2500 nm) can be used to rapidly estimate these traits on intact wheat leaves. Predictive models were constructed using gas exchange and hyperspectral reflectance data from 76 genotypes grown in glasshouses with different nitrogen levels and/or in the field under yield potential conditions. Models were developed using half of the observed data with the remainder used for validation, yielding correlation coefficients (R2 values) of 0.62 for Vcmax25, 0.7 for J, 0.81 for SPAD, 0.89 for LMA, and 0.93 for Narea, with bias <0.7%. The models were tested on elite lines and landraces that had not been used to create the models. The bias varied between -2.3% and -5.5% while relative error of prediction was similar for SPAD but slightly greater for LMA and Narea.

Biochemical model of C3 photosynthesis applied to wheat at different temperatures.

We examined the effects of leaf temperature on the estimation of maximal Rubisco capacity (Vcmax ) from gas exchange measurements of wheat leaves using a C3 photosynthesis model. Cultivars of spring wheat (Triticum aestivum (L)) and triticale (X Triticosecale Wittmack) were grown in a greenhouse or in the field and measured at a range of temperatures under controlled conditions in a growth cabinet (2 and 21% O2 ) or in the field using natural diurnal variation in temperature, respectively. Published Rubisco kinetic constants for tobacco did not describe the observed CO2 response curves well as temperature varied. By assuming values for the Rubisco Michaelis-Menten constants for CO2 (Kc ) and O2 (Ko ) at 25 °C derived from tobacco and the activation energies of Vcmax from wheat and respiration in the light, Rd , from tobacco, we derived activation energies for Kc and Ko (93.7 and 33.6 kJ mol-1 , respectively) that considerably improved the fit of the model to observed data. We confirmed that temperature dependence of dark respiration for wheat was well described by the activation energy for Rd from tobacco. The new parameters improved the estimation of Vcmax under field conditions, where temperatures increased through the day.

(-)-Epicatechin induces physiological cardiac growth by activation of the PI3K/Akt pathway in mice.

SCOPE: The flavanol (-)-epicatechin (Epi) has cardioprotective effects and improves physical capacity in normal mice. In addition, Epi increases nitric oxide (NO) production by activation of both PI3K/Akt or Ca2+ /CaMI/CaMKII (where Akt is protein kinase B; PI3K is phosphoinositide 3-kinase; CaMI is calmodulin; CaMKII is Ca2+ /calmodulin-dependent protein kinase II) signaling pathways, which have been associated with physiological and pathological cardiac hypertrophy, respectively. Notwithstanding all this information, few studies have been carried out that aimed to determine the potential beneficial effects that Epi may have in normal heart. METHODS AND RESULTS: Mice were treated by oral gavage with the flavanol Epi. The treatment induced a significant increase in heart weight, size of the free walls, and size of the cardiac fibers. Also, no evidence of cardiac fibrosis was revealed. Furthermore, the phosphorylation level of PI3K/Akt/mTOR/p70S6K (where mTOR is mammalian target of rapamycin; p70S6K is ribosomal protein S6 kinase beta-1) proteins was significantly higher in the heart of Epi-treated animals. In contrast, a significantly decreased level of pathological cardiac hypertrophy markers atrial natriuretic peptide and brain natriuretic peptide was observed along with no modification in the level of ß myosin heavy chain beta, calmodulin, and Ca2+ /calmodulin-dependent protein kinase II proteins. Hemodynamic parameters indicated an improvement in mechanical heart performance after Epi treatment. Interestingly, morphometric parameters were similar between treated and untreated mice after 4 wk without treatment. CONCLUSION: These findings indicate that Epi treatment induced physiological cardiac growth in healthy mice by activation of the PI3K/Akt pathway.

Phosphidoboratabenzene-rhodium(i) complexes as precatalysts for the hydrogenation of alkenes at room temperature and atmospheric pressure.

The di-tert-butylphosphido-boratabenzene ligand (DTBB) reacts with [(C2H4)2RhCl]2 yielding the dimeric species [(C2H4)Rh(DTBB)]2 (1). This species was fully characterized by multinuclear NMR and X-ray crystallography. Complex 1 readily dissociates ethylene in solution and upon exposure to 1 atm of H2 is capable of carrying out the hydrogenation of ethylene. The characterization of two Rh-H species by multinuclear NMR spectroscopy is provided. The reactivity of 1 towards the catalytic hydrogenation of alkenes and alkynes at room temperature and 1 atm of H2 is reported and compared to the activity of Wilkinson's catalyst under the same reaction conditions.

New ABA-hypersensitive Arabidopsis mutants are affected in loci mediating responses to water deficit and Dickeya dadantii infection.

On water deficit, abscisic acid (ABA) induces stomata closure to reduce water loss by transpiration. To identify Arabidopsis thaliana mutants which transpire less on drought, infrared thermal imaging of leaf temperature has been used to screen for suppressors of an ABA-deficient mutant (aba3-1) cold-leaf phenotype. Three novel mutants, called hot ABA-deficiency suppressor (has), have been identified with hot-leaf phenotypes in the absence of the aba3 mutation. The defective genes imparted no apparent modification to ABA production on water deficit, were inherited recessively and enhanced ABA responses indicating that the proteins encoded are negative regulators of ABA signalling. All three mutants showed ABA-hypersensitive stomata closure and inhibition of root elongation with little modification of growth and development in non-stressed conditions. The has2 mutant also exhibited increased germination inhibition by ABA, while ABA-inducible gene expression was not modified on dehydration, indicating the mutated gene affects early ABA-signalling responses that do not modify transcript levels. In contrast, weak ABA-hypersensitivity relative to mutant developmental phenotypes suggests that HAS3 regulates drought responses by both ABA-dependent and independent pathways. has1 mutant phenotypes were only apparent on stress or ABA treatments, and included reduced water loss on rapid dehydration. The HAS1 locus thus has the required characteristics for a targeted approach to improving resistance to water deficit. In contrast to has2, has1 exhibited only minor changes in susceptibility to Dickeya dadantii despite similar ABA-hypersensitivity, indicating that crosstalk between ABA responses to this pathogen and drought stress can occur through more than one point in the signalling pathway.