Occupational exposure to silica in construction workers: a literature-based exposure database.

We created an exposure database of respirable crystalline silica levels in the construction industry from the literature. We extracted silica and dust exposure levels in publications reporting silica exposure levels or quantitative evaluations of control effectiveness published in or after 1990. The database contains 6118 records (2858 of respirable crystalline silica) extracted from 115 sources, summarizing 11,845 measurements. Four hundred and eighty-eight records represent summarized exposure levels instead of individual values. For these records, the reported summary parameters were standardized into a geometric mean and a geometric standard deviation. Each record is associated with 80 characteristics, including information on trade, task, materials, tools, sampling strategy, analytical methods, and control measures. Although the database was constructed in French, 38 essential variables were standardized and translated into English. The data span the period 1974-2009, with 92% of the records corresponding to personal measurements. Thirteen standardized trades and 25 different standardized tasks are associated with at least five individual silica measurements. Trade-specific respirable crystalline silica geometric means vary from 0.01 (plumber) to 0.30 mg/m³ (tunnel construction skilled labor), while tasks vary from 0.01 (six categories, including sanding and electrical maintenance) to 1.59 mg/m³ (abrasive blasting). Despite limitations associated with the use of literature data, this database can be analyzed using meta-analytical and multivariate techniques and currently represents the most important source of exposure information about silica exposure in the construction industry. It is available on request to the research community.

Investigation of determinants of past and current exposures to formaldehyde in the reconstituted wood panel industry in Quebec.

OBJECTIVES: Past and present formaldehyde measurements made in facilities manufacturing reconstituted wood panels in Quebec have been collected in order to assess formaldehyde exposure and its determinants in this industry. METHODS: All 12 plants manufacturing Oriented-strand board (OSB), Medium density fibreboard (MDF) and Particle board (PB) in Quebec were visited by a research team which took area and personal measurements. Past measurements taken by governmental occupational health teams in these plants were also collected. Log-transformed formaldehyde concentrations were analysed with extended linear mixed-effects models. RESULTS: During 2001-2002, 275 measurements were taken by the research team, while 590 measurements dating back to 1984 were collected from governmental files. The area measurements had a global geometric mean (GM) of 0.28 p.p.m. [geometric standard deviation (GSD): 3.1]. The GM of the personal measurements was 0.17 p.p.m. (GSD: 2.3). The fixed-effects of the models for personal and area measurements explained 61 and 57% of the variance, respectively. Job (working area for area concentrations), process (PB, MDF, OSB), season of sampling, origin of the data (research, governmental) and year of sampling were significant determinants of exposure. Proximity to the press, winter conditions, PB and MDF processes and governmental data resulted in the highest exposures. Significant within-sampling campaign correlation was found for both personal and area models. The final models include different residual variances by process for personal measurements and by working area for area measurements. CONCLUSIONS: Several determinants of exposure to formaldehyde in the reconstituted wood panel industry were successfully identified. Higher levels found in governmental data as compared to research data may be explained by a 'worst-case' strategy bias. The observed intra-sampling campaign correlation supports existing results suggesting that measurements taken in a small time frame tend to be correlated. Exposures in this sector are low compared to most 8 h-TWA occupational exposure limits (e.g. 1 p.p.m.) but close to the most demanding ones (e.g. 0.3 p.p.m.).

Assessment of exposure to quartz, cristobalite and silicon carbide fibres (whiskers) in a silicon carbide plant.

The main objective of the present paper is to report on the concentration of silicon carbide (SiC) fibres, crystalline silica and respirable dust in a Canadian SiC production plant and to compare the results with earlier investigations. The second objective is to tentatively explain the differences in concentration of the fibrogenic substances between different countries. The assessment of SiC fibres, dusts, respirable quartz and cristobalite was performed according to standard procedures. The highest 8 h time-weighted average concentrations of fibres were found among the crusher and backhoe attendants and the carboselectors with an arithmetic mean of 0.63 fibres ml(-1) for the former group and 0.51 fibres ml(-1) for the latter group. The results of respirable SiC fibres in the Canadian plant were lower than in the Norwegian and Italian industries. Most of the 8 h time-weighted average concentrations for quartz were less than or around the limit of detection of 0.01 mg m(-3). The maximum 8 h time-weighted average concentration for quartz was found among the carboselectors (0.157 mg m(-3)), followed by the labourers (0.032 mg m(-3)). Similarly, most of the 8 h time-weighted average cristobalite measurements were less than the limit of detection of 0.01 mg m(-3) except for the carboselectors where it was found to be 0.044 mg m(-3). The assessment of the Italian occupational settings exposure demonstrated elevated quartz concentrations, while cristobalite was absent. The authors have concluded that the investigations that were performed in the last two decades in this field by researchers from different countries seem to support that SiC fibres (whiskers) constitute a major airborne health hazard.