Evaluation of stationary phases packed with superficially porous particles for the analysis of pharmaceutical compounds using supercritical fluid chromatography.

Superficially porous particles (SPP), or core shell particles, which consist of a non-porous silica core surrounded by a thin shell of porous silica, have gained popularity as a solid support for chromatography over the last decade. In the present study, five unbonded silica, one diol, and two ethylpyridine (2-ethyl and 4-ethyl) SPP columns were evaluated under SFC conditions using two mixtures, one with 17 drug-like compounds and the other one with 7 drug-like basic compounds. Three of the SPP phases, SunShell™ 2-ethylpyridine (2-EP), Poroshell™ HILIC, and Ascentis(®) Express HILIC, exhibited superior performances relative to the others (reduced theoretical plate height (hmin) values of 1.9-2.5 for neutral compounds). When accounting for both achievable plate count and permeability of the support using kinetic plot evaluation, the Cortecs™ HILIC 1.6µm and Ascentis(®) Express HILIC 2.7µm phases were found to be the best choices among tested SPPs to reach efficiencies up to 30,000 plates in the minimum amount of time. For desired efficiencies ranging from 30,000 to 60,000 plates, the SunShell™ 2-EP 2.6µm column clearly outperformed all other SPPs. With the addition of a mobile phase additive such as 10mM ammonium formate, which was required to elute the basic components with sharp peaks, the Poroshell™ HILIC, SunShell™ Diol and SunShell™ 2-EP phases represent the most orthogonal SPP columns with the highest peak capacities. This study demonstrates the obvious benefits of using columns packed with SPP on current SFC instrumentation.

Modern analytical supercritical fluid chromatography using columns packed with sub-2 µm particles: a tutorial.

This tutorial provides an overview of the possibilities, limitations and analytical conditions of modern analytical supercritical fluid chromatography (SFC) using columns packed with sub-2 µm particles. In particular, it gives a detailed overview of commercially available modern SFC instrumentation and the detectors that can be employed (UV, MS, ELSD, FID, etc.). Some advice on the choice of the stationary phase dimensions and chemistries, the nature of the mobile phase (choice of organic modifier and additives) and its flow rate as well as the backpressure and temperature are also provided. Finally, several groups of potentially problematic compounds, including lipophilic compounds, hydrophilic substances and basic drugs, are discussed in detail. All these families of analytes can be resolved with SFC but require specific analytical conditions.