Your browser doesn't support javascript.
loading
Show: 20 | 50 | 100
Results 1 - 3 de 3
Filter
Add more filters










Database
Language
Publication year range
1.
Chemosphere ; 305: 135481, 2022 Oct.
Article in English | MEDLINE | ID: mdl-35753424

ABSTRACT

PM10 emissions generated from the brake wear of passenger car per braking event during three test driving cycles (WLTP, LACT, and WLTP-Brake) were studied using a finite element analysis (FEA) approach in combination with the relationship among the mass emitted rate of airborne particles versus local contact pressure and sliding speed. In addition, PM10 emissions were measured per braking event during the WLTP-Brake cycle on a brake dynamometer using an electrical low-pressure impactor (ELPI+) to validate the proposed FEA approach. The simulated and experimental results for WLTP-Brake illustrated that the proposed simulation approach has the potential to predict PM10 from brake wear per braking event, with an R2 value of 0.93. The FEA results of three test driving cycles showed that there was a gradient rise in pad wear on both sides from the inner to outer radii. The simulated PM10 emission factors during the WLTP, LACT, and WLTP-Brake were 7.9 mg km-1 veh-1, 9.8 mg km-1 veh-1, and 6.4 mg km-1 veh-1, respectively. Among three test driving cycles, the ratio of PM10 to total brake wear mass per braking event was the largest for the LACT, followed by WLTP and WLTP-Brake. From a practical application perspective, reducing the frequency of high-speed braking may be an effective way to decrease the generation of PM10 emissions.


Subject(s)
Air Pollutants , Vehicle Emissions , Air Pollutants/analysis , Automobiles , Environmental Monitoring/methods , Particle Size , Particulate Matter/analysis , Vehicle Emissions/analysis
2.
J Hazard Mater ; 420: 126626, 2021 10 15.
Article in English | MEDLINE | ID: mdl-34273888

ABSTRACT

This paper evaluates the effect of the electrification of the small, medium, and large internal combustion engine (ICE) passenger cars on the levels of total particulate matter (PM). The total mean PM10 and PM2.5 emission factors (EFs) on urban, rural, and motorway roads are in the range of 26.13 - 39.57 mg km-1 veh-1 and 13.39 - 18.44 mg km-1 veh-1, respectively, from small to large ICE passenger cars. Correspondingly, the total mean PM10 and PM2.5 non-exhaust EFs on urban, rural, and motorway roads range from 27.76 to 43.43 mg km-1 veh-1 and 13.17 -19.24 mg km-1 veh-1 from equivalent small to large electric vehicles (EVs) without regenerative braking. These results show that the total non-exhaust PM from the equivalent EVs may exceed all PM from ICE passenger cars, including exhaust particle emissions, which are dependent mainly on the extent of regenerative braking, followed by passenger car type and road type. PM10 EFs for equivalent EVs without regenerative braking on urban, rural, and motorway roads are all higher than those from ICE cars. As for PM2.5, most of the equivalent EVs require different extents of regenerative braking to reduce brake emissions to be in line with all particle emissions from relative ICE cars.


Subject(s)
Air Pollutants , Air Pollution , Air Pollutants/analysis , Air Pollution/analysis , Environmental Monitoring , Motor Vehicles , Particle Size , Particulate Matter/analysis , Vehicle Emissions/analysis
3.
Environ Int ; 137: 105564, 2020 04.
Article in English | MEDLINE | ID: mdl-32086078

ABSTRACT

Vehicles generate particulate matter (PM) in significant amounts as their brake systems wear. These particles can influence air quality and their transport/deposition may affect the edaphic and aquatic ecosystems. As part of the LOWBRASYS H2020 project, new more eco-friendly brake disc and pad formulations were developed. PMs generated from traditional (FM1-BD1) and innovative (FM4-BD2, FMB-BD7) brake systems in bench tests were studied. The PMs' physical/chemical characteristics were preliminarily investigated. To study the possible environmental impact of the nano-micro particulate, we used a battery of ecotoxicological tests. We employed the microalga Pseudokirchneriella subcapitata, the crustacean Daphnia magna and the bacteria Vibrio fischeri as aquatic bioindicators, while for the edaphic ecosystem we used the seeds of Lepidium sativum and Sorghum saccharatum, the nematode Caenorhabditis elegans, the earthworm Eisenia andrei and the ameba Dictyostelium discoideum. The results showed a higher sensitivity of the freshwater organisms exposed to the soluble PM fraction, with respect to the edaphic ones. FM4-BD2 brake formulation was slightly more toxic for algae (200 mg/L) than FM1-BD1 (500 mg/L). The new system FMB-BD7 particulate was not harmful for crustacean survival, and resulted weakly toxic for algal reproduction only at 500 mg/L. The particulate material per se was found to affect the algal reproduction. No toxic effects were found on nematodes, earthworms and seeds up to 1000 mg/L. However, in D. discoideum the reproduction rate was significantly reduced starting from 100 mg/L; and the lysosomal membrane stability showed a relevant alteration also at minimal concentration (0.1 mg/L). The results demonstrated a minimal risk for biodiversity of the particulates from the different brake systems and highlighted a more eco-friendly performance the new brake-pad FMB-BD7. However, the occurrence of sublethal effects should be considered as a possible contribution of the particle toxicity to the biological effects of the environmental pollution.


Subject(s)
Dictyostelium , Particulate Matter , Water Pollutants, Chemical , Aliivibrio fischeri , Animals , Aquatic Organisms , Daphnia , Ecosystem , Ecotoxicology , Particulate Matter/toxicity , Water Pollutants, Chemical/toxicity
SELECTION OF CITATIONS
SEARCH DETAIL
...