A Novel Bioreactor System for the Assessment of Endothelialization on Deformable Surfaces.

The generation of a living protective layer at the luminal surface of cardiovascular devices, composed of an autologous functional endothelium, represents the ideal solution to life-threatening, implant-related complications in cardiovascular patients. The initial evaluation of engineering strategies fostering endothelial cell adhesion and proliferation as well as the long-term tissue homeostasis requires in vitro testing in environmental model systems able to recapitulate the hemodynamic conditions experienced at the blood-to-device interface of implants as well as the substrate deformation. Here, we introduce the design and validation of a novel bioreactor system which enables the long-term conditioning of human endothelial cells interacting with artificial materials under dynamic combinations of flow-generated wall shear stress and wall deformation. The wall shear stress and wall deformation values obtained encompass both the physiological and supraphysiological range. They are determined through separate actuation systems which are controlled based on validated computational models. In addition, we demonstrate the good optical conductivity of the system permitting online monitoring of cell activities through live-cell imaging as well as standard biochemical post-processing. Altogether, the bioreactor system defines an unprecedented testing hub for potential strategies toward the endothelialization or re-endothelialization of target substrates.

A comparative investigation of mussel-mimetic sealants for fetal membrane repair.

Towards the prevention of iatrogenic preterm premature rupture of the fetal membrane, two mussel-mimetic tissue adhesives (cT and cPEG) have been compared and qualified as possible sealants for membrane repair. Monotonic and cyclic inflation tests of repaired fetal membranes were carried out in order to investigate the performance of the glues under quasi-static, fast, and repeated loading. Finite element simulations of repaired and inflated synthetic membranes allowed to compare cT and cPEG under large deformations. Both adhesives seal the membrane well, resisting pressures higher than the intra-uterine baseline. Only under repeated mechanical load, as well as under fast and acute deformation of the membrane, the sealing performance has deteriorated. Even though cT loses adhesion to the deformed membrane, it is able to withstand high deformations and pressures without rupturing, while cPEG breaks.

Deformation mechanisms of human amnion: Quantitative studies based on second harmonic generation microscopy.

Multiphoton microscopy has proven to be a versatile tool to analyze the three-dimensional microstructure of the fetal membrane and the mechanisms of deformation on the length scale of cells and the collagen network. In the present contribution, dedicated microscopic tools for in situ mechanical characterization of tissue under applied mechanical loads and the related methods for data interpretation are presented with emphasis on new stepwise monotonic uniaxial experiments. The resulting microscopic parameters are consistent with previous ones quantified for cyclic and relaxation tests, underlining the reliability of these techniques. The thickness reduction and the substantial alignment of collagen fiber bundles in the compact and fibroblast layer starting at very small loads are highlighted, which challenges the definition of a reference configuration in terms of a force threshold. The findings presented in this paper intend to inform the development of models towards a better understanding of fetal membrane deformation and failure, and thus of related problems in obstetrics and other clinical conditions.

Mechanical and microstructural investigation of the cyclic behavior of human amnion.

The structural and mechanical integrity of amnion is essential to prevent preterm premature rupture (PPROM) of the fetal membrane. In this study, the mechanical response of human amnion to repeated loading and the microstructural mechanisms determining its behavior were investigated. Inflation and uniaxial cyclic tests were combined with corresponding in situ experiments in a multiphoton microscope (MPM). Fresh unfixed amnion was imaged during loading and changes in thickness and collagen orientation were quantified. Mechanical and in situ experiments revealed differences between the investigated configurations in the deformation and microstructural mechanisms. Repeated inflation induces a significant but reversible volume change and is characterized by high energy dissipation. Under uniaxial tension, volume reduction is associated with low energy, unrecoverable in-plane fiber reorientation.

Time-dependent mechanical behavior of human amnion: macroscopic and microscopic characterization.

Characterizing the mechanical response of the human amnion is essential to understand and to eventually prevent premature rupture of fetal membranes. In this study, a large set of macroscopic and microscopic mechanical tests have been carried out on fresh unfixed amnion to gain insight into the time-dependent material response and the underlying mechanisms. Creep and relaxation responses of amnion were characterized in macroscopic uniaxial tension, biaxial tension and inflation configurations. For the first time, these experiments were complemented by microstructural information from nonlinear laser scanning microscopy performed during in situ uniaxial relaxation tests. The amnion showed large tension reduction during relaxation and small inelastic strain accumulation in creep. The short-term relaxation response was related to a concomitant in-plane and out-of-plane contraction, and was dependent on the testing configuration. The microscopic investigation revealed a large volume reduction at the beginning, but no change of volume was measured long-term during relaxation. Tension-strain curves normalized with respect to the maximum strain were highly repeatable in all configurations and allowed the quantification of corresponding characteristic parameters. The present data indicate that dissipative behavior of human amnion is related to two mechanisms: (i) volume reduction due to water outflow (up to ∼20 s) and (ii) long-term dissipative behavior without macroscopic deformation and no systematic global reorientation of collagen fibers.

Contractions, a risk for premature rupture of fetal membranes: a new protocol with cyclic biaxial tension.

This study aims at investigating the effect of repeated mechanical loading on the rupture and deformation properties of fetal membranes. Ten membranes delivered by cesarean sections were tested using a custom-built inflation device which provides a multi-axial stress state. For each membrane, a group of samples was first cyclically stretched by application of pressure ranging between 10 and 40 mmHg. After cycles, samples were subjected to inflation up to rupture. Differences between mechanical parameters from cycled and uncycled samples were analyzed. Ten cycles at 40% of mean critical membrane tension--representative of mean physiologic contractions--did not affect strength and stiffness of fetal membranes but reduced the work to rupture, thus indicating that contractions might increase the risk of premature rupture of the membrane. Cyclic testing demonstrated a large hysteresis loop and irreversible deformation on the first cycle, followed by rapid stabilization on subsequent cycles. In 80% of tests, amnion ruptured first and at the periphery of the sample, under uniaxial strain state. Chorion ruptured at higher deformation levels in the middle, under biaxial strain state.

Bladder tissue passive response to monotonic and cyclic loading.

The fundamental passive mechanical properties of the bladder need to be known in order to design the most appropriate long-term surgical repair procedures and develop materials for bladder reconstruction. This study has focused on the bladder tissue viscoelastic behavior, providing a comprehensive analysis of the effects of fibers orientation, strain rate and loading history. Whole bladders harvested from one year old fat pigs (160 kg approximate weight) were dissected along the apex-to-base direction and samples were isolated from the lateral region of the wall, as well as along apex-to-base and transverse directions. Uniaxial monotonic (stress relaxation) and cyclic tests at different frequencies have been performed with the Bose Electroforce(®) 3200. Normalized stress relaxation functions have been interpolated using a second-order exponential series and loading and unloading stress-strain curves have been interpolated with a non-linear elastic model. The passive mechanical behavior of bladder tissue was shown to be heavily influenced by frequency and loading history, both in monotonic and cyclic tests. The anisotropy of the tissue was evident in monotonic and in cyclic tests as well, especially in tests performed on an exercised tissue and at high frequencies. In contrast, transverse and apex-to-base samples demonstrated an analogous relaxation behavior.