ABSTRACT
A novel approach to electric explosion of intertwined wires to obtain homogeneous powder mixtures intended for preparing feedstock for extrusion 3D printing has been applied. The powder were composed of spherical micron- and nano-sized W/Cu particles in-situ alloyed by Zn and Ni during electric explosion of intertwined dissimilar metal wires is offered. The mean particle size measured by micron-sized particles was not more than 20 µm. The average number size of these particles was 3 µm and it was dependent on the energy input. The powders contained phases such as α-W, ß-W/W3O as well as FCC α-Cu(Zn) and α-Cu(Ni) solid solutions with the crystalline lattice parameters 3.629 and 3.61 A, respectively.
ABSTRACT
The water oxidation of bimetallic Al/Ag nanoparticles has been shown to yield nanoscale structures whose morphology, phase composition and textural characteristics are determined by the synthesis conditions. Flower-like nanoscale structures with silver nanoparticles, with an average size of 17 nm, are formed in water at 60 °C. Under hydrothermal conditions at temperatures of 200 °C and a pressure of 16 MPa, boehmite nanoplatelets with silver nanoparticles, with an average size of 22 nm, are formed. The oxidation of Al/Ag nanoparticles using humid air at 60 °C and 80% relative humidity results in the formation of rod-shaped bayerite nanoparticles and Ag nanoparticles with an average size of 19 nm. The thermal treatment of nanoscale structures obtained at a temperature of 500 °C has been shown to lead to a phase transition into γ-Al2O3, while maintaining the original morphology, and to a decrease in the average size of the silver nanoparticles to 12 nm and their migration to the surface of nanoscale structures. The migration of silver to the nanoparticle surface influences the formation of a double electric layer of particles, and leads to a shift in the pH of the zero-charge point by approximately one, with the nanostructures acquiring pronounced antimicrobial properties.
ABSTRACT
The design of advanced nanostructured materials with predetermined physical properties requires knowledge of the relationship between these properties and the internal structure of the material at the nanoscale, as well as the dependence of the internal structure on the production (synthesis) parameters. This work is the first report of computer-aided analysis of high pressure consolidation (cold sintering) of bimetallic nanoparticles of two immiscible (Fe and Cu) metals using the embedded atom method (EAM). A detailed study of the effect of cold sintering parameters on the internal structure and properties of bulk Fe-Cu nanocomposites was conducted within the limitations of the numerical model. The variation of estimated density and bulk porosity as a function of Fe-to-Cu ratio and consolidation pressure was found in good agreement with the experimental data. For the first time, topological analysis using Minkowski functionals was applied to characterize the internal structure of a bimetallic nanocomposite. The dependence of topological invariants on input processing parameters was described for various components and structural phases. The model presented allows formalizing the relationship between the internal structure and properties of the studied nanocomposites. Based on the obtained topological invariants and Hadwiger's theorem we propose a new tool for computer-aided design of bimetallic Fe-Cu nanocomposites.
