Mechanical properties of a nanoporous membrane used in implantable medical devices. Correlation between experimental characterization and 2D numerical simulation.

Nanoporous membranes are used for the elaboration of implantable medical devices. In order to guaranty their integrity after implantation in a patient body, it is necessary to characterize the microstructure and the mechanical behavior of such membranes. They present randomly distributed pores around 1µm in diameter at the surface. X-ray nanotomography permits to get the geometry of the pores through the thickness with a reduction of the diameter in the core. A multiscale study is done to characterize the membranes: macroscopic tensile tests permit to get the behavior law of the non porous material and in situ tensile tests are carried on in a Scanning Electron Microscope in order to observe the evolution of pores and cracks during loading. A 2D Finite Element Model is also developed in parallel. The confrontation between experiments and numerical simulations permit to validate the accuracy of the model. The latter is then used to simulate several types of loadings considering various pore distributions and sizes.

Development and mechanical characterization of porous titanium bone substitutes.

Commercially Pure Porous Titanium (CPPTi) can be used for surgical implants to avoid the stress shielding effect due to the mismatch between the mechanical properties of titanium and bone. Most researchers in this area deal with randomly distributed pores or simple architectures in titanium alloys. The control of porosity, pore size and distribution is necessary to obtain implants with mechanical properties close to those of bone and to ensure their osseointegration. The aim of the present work was therefore to develop and characterize such a specific porous structure. First of all, the properties of titanium made by Selective Laser Melting (SLM) were characterized through experimental testing on bulk specimens. An elementary pattern of the porous structure was then designed to mimic the orthotropic properties of the human bone following several mechanical and geometrical criteria. Finite Element Analysis (FEA) was used to optimize the pattern. A porosity of 53% and pore sizes in the range of 860 to 1500 µm were finally adopted. Tensile tests on porous samples were then carried out to validate the properties obtained numerically and identify the failure modes of the samples. Finally, FE elastoplastic analyses were performed on the porous samples in order to propose a failure criterion for the design of porous substitutes.