Gas-Phase Ion Fluorescence Spectroscopy of Tailor-made Rhodamine Homo- and Heterodyads: Quenching of Electronic Communication by π-Conjugated Linkers.

While many key photophysical features are understood for electronic communication between chromophores in neutral compounds, there is limited information on the effect of charges in practically relevant ionic chromo/fluorophores. Here we have chosen positively charged rhodamines and prepared a selection of homo- and heterodimers with alkyl or π-conjugated, acetylenic bridges. Protonated molecules were transferred as isolated ions to gas phase where there is no solvent screening of charges, and fluorescence spectra were measured with a custom-made ion-trap setup. Our work reveals strong polarization of the π-spacer (induced dipole/quadrupole) when it experiences the electric field from one/ two dyes. Hence, π-spacers provide efficient shielding of charges by reducing the Coulomb interaction, whereas two dye cations polarize each other when connected by an alkyl. The screening influences the Förster resonance energy transfer efficiency that relies on the dipole-dipole interaction.

Establishing linear-free-energy relationships for the quadricyclane-to-norbornadiene reaction.

The kinetics of the thermal quadricyclane-to-norbornadiene (QC-to-NBD) isomerization reaction was studied for a large selection of derivatives where the one NBD double bond contains a cyano and aryl substituent of either electron-withdrawing or -donating character. While the kinetics data did not satisfy a linear-free-energy-relationship for all the derivatives based on Hammett σ values, we found individual linear relationships for derivatives containing either electron-withdrawing or electron-donating para substituents on the aryl group; with the most electron-witdrawing substituent in the one series and with the most electron-donating substituent in the other providing the fastest reaction (corresponding to opposite slopes of the Hammett plots). All data were well described, however, by a linear relationship when using Creary radical values; the correlation could be slightly improved by using a combination of σ and values (used in ratio of 0.104 : 1). The results imply a combination of polar and free radical effects for the isomerization reaction of this specific class of derivatives, with the latter playing the most significant role. The NBD derivatives were prepared by Diels-Alder cycloaddition reactions between cyclopentadiene and 3-arylpropiolonitriles, and in the case of bromophenyl derivatives further cyanation and Sonogashira coupling reactions were performed.

Multi-Photochromic Molecules Based on Dihydroazulene Units.

Multi-photochromic systems incorporating individually addressable switching units are attractive for development of advanced data storage devices. Here, we present the synthesis and properties of a selection of such molecular systems incorporating the dihydroazulene/vinylheptafulvene (DHA/VHF) photo-/thermoswitch. The influence of the linker (meta-phenylene vs. azulene-1,3-diyl vs. thiophene-2,5-diyl) separating two DHA units on the switching properties was investigated. An azulene-1,3-diyl spacer largely inhibited both the DHA-to-VHF photoisomerizations and the thermal VHF-to-DHA back-reactions; the latter occurred ten times slower than for the related compound with a meta-phenylene spacer. A DHA trimer containing three DHA units around a central benzene ring was found to undergo stepwise DHA-to-VHF photoisomerizations, whereas the thermal back-reactions occurred at similar rates for the three VHF entities. A meta-phenylene-bridged DHA dimer was subjected to further structural modifications at position C-1 of each DHA, having strong implications for the switching events, and synthetic steps for further functionalizations at position C-7 of each DHA were investigated. Finally, the molecular structure (from X-ray crystallographic analysis) between the meta-phenylene-bridged DHA dimer and CuI is presented.

Oxygen-dependent photophysics and photochemistry of prototypical compounds for organic photovoltaics: inhibiting degradation initiated by singlet oxygen at a molecular level.

Photo-initiated, oxygen-mediated degradation of the molecules in the active layer of organic photovoltaic, OPV, devices currently limits advances in the development of solar cells. To address this problem systematically and at a molecular level, it is informative to quantify the kinetics of the pertinent processes, both in solution phase and in solid films. To this end, we examined the oxygen-dependent photophysics and photochemistry of selected functionalized fullerenes, thiophene derivatives, and a subphthalocyanine commonly used in OPV devices. We find that the photosensitized production of singlet molecular oxygen, O2(a1Δg), by these molecules is a key step in the degradation process. We demonstrate that the addition of either ß-carotene or astaxanthin as antioxidants can inhibit degradation by a combination of three processes: (a) deactivation of O2(a1Δg) to the oxygen ground state, O2(X3Σg -), (b) quenching of the O2(a1Δg) precursor, and (c) sacrificial reactions of the carotenoid with free radicals formed in the photo-initiated reactions. For OPV systems in which reaction with O2(a1Δg) contributes to the degradation, the first two of these processes are desired and should have appreciable impact in prolonging the longevity of OPV devices because they do not result in a chemical change of the system.

Norbornadiene-dihydroazulene conjugates.

The introduction of various photochromic units into the same molecule is an attractive approach for the development of novel molecular solar thermal (MOST) energy storage systems. Here, we present the synthesis and characterisation of a series of covalently linked norbornadiene/dihydroazulene (NBD/DHA) conjugates, using the Sonogashira coupling as the key synthetic step. Generation of the fully photoisomerized quadricyclane/vinylheptafulvene (QC/VHF) isomer was found to depend strongly on how the two units are connected - by linear conjugation (a para-phenylene bridge) or cross-conjugation (a meta-phenylene bridge) or by linking to the five- or seven-membered ring of DHA - as well as on the electronic character of another substituent group on the NBD unit. When the QC-VHF system could be reached, the QC-to-NBD back-reaction occurred faster than the VHF-to-DHA back-reaction, while the latter could be promoted simply by the addition of Cu(i) ions. The absence or presence of Cu(i) can thus be used to control whether heat releases should occur on different or identical time scales. The experimental findings were rationalized in a computational study by comparing natural transition orbitals (NTOs). Moreover, the calculations revealed an energy storage capacity of 106-110 kJ mol-1 of the QC-VHF isomers, which is higher than the sum of the capacities of the individual, separate units. The major contribution to the energy storage relates to the energetic QC form, while the major contribution to the absorption of visible light originates from the DHA photochrome; some of the NBD-DHA conjugates had absorption onsets at 450 nm or beyond.

Solar Energy Storage by Molecular Norbornadiene-Quadricyclane Photoswitches: Polymer Film Devices.

Devices that can capture and convert sunlight into stored chemical energy are attractive candidates for future energy technologies. A general challenge is to combine efficient solar energy capture with high energy densities and energy storage time into a processable composite for device application. Here, norbornadiene (NBD)-quadricyclane (QC) molecular photoswitches are embedded into polymer matrices, with possible applications in energy storing coatings. The NBD-QC photoswitches that are capable of absorbing sunlight with estimated solar energy storage efficiencies of up to 3.8% combined with attractive energy storage densities of up to 0.48 MJ kg-1. The combination of donor and acceptor units leads to an improved solar spectrum match with an onset of absorption of up to 529 nm and a lifetime (t 1/2) of up to 10 months. The NBD-QC systems with properties matched to a daily energy storage cycle are further investigated in the solid state by embedding the molecules into a series of polymer matrices revealing that polystyrene is the preferred choice of matrix. These polymer devices, which can absorb sunlight and over a daily cycle release the energy as heat, are investigated for their cyclability, showing multicycle reusability with limited degradation that might allow them to be applied as window laminates.

Molecular solar thermal energy storage in photoswitch oligomers increases energy densities and storage times.

Molecular photoswitches can be used for solar thermal energy storage by photoisomerization into high-energy, meta-stable isomers; we present a molecular design strategy leading to photoswitches with high energy densities and long storage times. High measured energy densities of up to 559 kJ kg-1 (155 Wh kg-1), long storage lifetimes up to 48.5 days, and high quantum yields of conversion of up to 94% per subunit are demonstrated in norbornadiene/quadricyclane (NBD/QC) photo-/thermoswitch couples incorporated into dimeric and trimeric structures. By changing the linker unit between the NBD units, we can at the same time fine-tune light-harvesting and energy densities of the dimers and trimers so that they exceed those of their monomeric analogs. These new oligomers thereby meet several of the criteria to be met for an optimum molecule to ultimately enter actual devices being able to undergo closed cycles of solar light-harvesting, energy storage, and heat release.

Single-molecule detection of dihydroazulene photo-thermal reaction using break junction technique.

Charge transport by tunnelling is one of the most ubiquitous elementary processes in nature. Small structural changes in a molecular junction can lead to significant difference in the single-molecule electronic properties, offering a tremendous opportunity to examine a reaction on the single-molecule scale by monitoring the conductance changes. Here, we explore the potential of the single-molecule break junction technique in the detection of photo-thermal reaction processes of a photochromic dihydroazulene/vinylheptafulvene system. Statistical analysis of the break junction experiments provides a quantitative approach for probing the reaction kinetics and reversibility, including the occurrence of isomerization during the reaction. The product ratios observed when switching the system in the junction does not follow those observed in solution studies (both experiment and theory), suggesting that the junction environment was perturbing the process significantly. This study opens the possibility of using nano-structured environments like molecular junctions to tailor product ratios in chemical reactions.

Photoswitching of Dihydroazulene Derivatives in Liquid-Crystalline Host Systems.

Photoswitches and dyes in the liquid-crystalline nematic phase have the potential for use in a wide range of applications. A large order parameter is desirable to maximize the change in properties induced by an external stimulus. A set of photochromic and nonphotochromic dyes were investigated for these applications. It was found that a bent-shaped 7-substituted dihydroazulene (DHA) photoswitch exhibited liquid-crystalline properties. Further investigation demonstrated that this material actually followed two distinct reaction pathways on heating, to a deactivated form by a 1,5-sigmatropic shift and to a linear 6-substituted DHA. In addition, elimination of hydrogen cyanide from the photoactive DHA gave both bent and linear azulene dyes. In a nematic host that has no absorbance around 350 nm, it was found that only the linear DHA derivative has nematic properties; however, both 6- and 7-substituted DHAs were found to have large order parameters. In the nematic host, ring opening of either DHA to the corresponding vinylheptafulvene resulted in a decrease in dichroic order parameter and an unusually fast back-reaction to a mixture of both DHAs. Likewise, only the linear azulene derivative showed mesomorphic properties. In the same nematic host, large order parameters were also observed for these dyes.

Azulenium chemistry: towards new derivatives of photochromic dihydroazulenes.

Here we present the preparation of a selection of azulenium ions by hydride abstraction from photochromic 1,8a-dihydroazulenes (1,8a-DHAs) incorporating two cyano groups at C-1. The reactivity of the electrophilic tropylium ring of these molecules towards lithium triisopropylsilylacetylide was investigated. The position of attack by the nucleophile depended on the substitution pattern of the azulenium cation but was in general found to occur preferentially at positions C-4, C-5, and C-6, and to a minor extent at positions C-7 and C-8. The outcome was a mixture of non-photochromic, regioisomeric DHAs. One of these compounds containing the ethynyl substituent at position C-4 was partly tautomerized to the photochromic 1,8a-dihydroazulene, which was isolated and its switching properties were investigated by UV-Vis absorption spectroscopy. Upon irradiation, it undergoes a ring-opening reaction to form a vinylheptafulvene (VHF), which in turn returns to the original DHA. The half-life of this reaction was significantly smaller than for a derivative with the alkynyl substituent placed at C-7. This fast switching behavior was according to the calculations explained by an enhancement in the stability of the reactive s-cis conformer of the VHF relative to the, still more stable, s-trans conformer, and by a smaller activation energy for this s-cis conformer to undergo ring-closure.

A bis(heptafulvenyl)-dicyanoethylene thermoswitch with two sites for ring closure.

Suitably functionalized vinylheptafulvenes (VHFs) act as thermoswitches undergoing ring closure to the corresponding dihydroazulenes (DHAs). Here we present the synthesis of a new such thermoswitch incorporating two heptafulvene rings on a dicyanoethylene unit. The synthetic protocol explores both the tropylium species as an electrophile and as a leaving group in the generation of the heptafulvene units. The thermally induced ring closure was enhanced as a result of two accessible sites for the reaction to occur.