Polymeric Microcapsules as Robust Mimics of Emulsion Liquid Membranes for Selective Ion Separations.

Selective ion separations are increasingly needed to combat water scarcity, recover resources from wastewater, and enable the efficient recycling of electronics waste. Emulsion liquid membranes (ELMs) have received interest due to rapid kinetics, high selectivities, and low solvent requirements but are too unstable for industrial usage. We demonstrate that polymeric microcapsules can serve as robust, solvent-free mimics of ELMs. As a proof of concept, we incorporated the copper-selective ligand Lix 84-I in the walls of microcapsules formed from a commercial polystyrene-b-polybutadiene-b-polystyrene triblock polymer. The microcapsules were formed from a double-emulsion template, resulting in particles typically 20-120 µm in diameter that encapsulated even smaller droplets of a dilute (≤0.5 M) H2SO4 solution. Batch experiments demonstrated facilitated-transport behavior, with equilibrium reached in as little as 10 min for microcapsules with 1% ligand, and with ∼15-fold selectivity for Cu2+ over Ni2+. Furthermore, the microcapsules could be packed readily in columns for flow-through operation, thus enabling near-complete Cu2+ removal in ∼2 min under certain conditions, recovery of Cu2+ by flowing through fresh dilute H2SO4, and reuse for at least 10 cycles. The approach in this work can serve as a template for using selective ligands to enable robust and simple flow-through processes for a variety of selective ion separations.

Functionalized Polymersomes from a Polyisoprene-Activated Polyacrylamide Precursor.

Self-assembled polymer nanoparticles have tremendous potential in biomedical and environmental applications. For all applications, tailored polymer chemistries are critical. In this study, we demonstrate a precursor approach in which an activated, organic solvent-soluble block polymer precursor is modified through mild postpolymerization modifications to access new polymer structures. We synthesized and characterized poly(isoprene)-block-poly(di-Boc acrylamide) diblock polymers. This activated-acrylamide-based polymer was then reacted with amines or reductants in the absence of catalysts to yield the hydrophilic blocks polyacrylamide, poly(hydroxypropylene), and poly(N-ethyl acrylamide). The resulting amphiphilic block polymers self-assembled in water to form polymersomes, as confirmed by cryo-electron microscopy and confocal microscopy. The approach also enables simple functionalization with specialized ligands, which we demonstrated by tagging polymers with an amino-fluorophore and imaging by confocal microscopy. We expect that the methodologies established in this study will open doors to new and useful solution nanostructures with surface chemistries that can be optimized for various applications.

Poly(methyl methacrylate) Films with High Concentrations of Silicon Quantum Dots for Visibly Transparent Luminescent Solar Concentrators.

Silicon quantum dots (Si QDs) are attractive, nontoxic luminophores for luminescent solar concentrators (LSCs). Here, we produced Si QD/poly(methyl methacrylate) (PMMA) films on glass by doctor-blading polymer solutions and achieved films with low light scattering at an order of magnitude higher Si QD weight fraction than has been achieved previously in the bulk. We suggest that the fast solidification rate of films as compared to slow bulk polymerization is an enabling factor in avoiding large agglomerates within the nanocomposites. Scanning electron microscopy confirmed that ∼100 nm or larger QD agglomerates exist in light-scattering films, and photoluminescence intensity measurements show that light scattering, if present, significantly reduces waveguiding efficiencies for LSCs. Nonscattering films fabricated in this work exhibit high ultraviolet absorption (>80%) paired with high visible transmission (>87%) and minimal visible haze (∼1%), making them well suited for semitransparent coatings for LSCs realized as solar harvesting windows.

Tools for managing image flow in the modality to clinical-image-review chain.

Web-based clinical-image viewing is commonplace in large medical centers. As demands for product and performance escalate, physicians, sold on the concept of "any image, anytime, anywhere," fret when image studies cannot be viewed in a time frame to which they are accustomed. Image delivery pathways in large medical centers are oftentimes complicated by multiple networks, multiple picture archiving and communication systems (PACS), and multiple groups responsible for image acquisition and delivery to multiple destinations. When studies are delayed, it may be difficult to rapidly pinpoint bottlenecks. Described here are the tools used to monitor likely failure points in our modality to clinical-image-viewing chain and tools for reporting volume and throughput trends. Though perhaps unique to our environment, we believe that tools of this type are essential for understanding and monitoring image-study flow, re-configuring resources to achieve better throughput, and planning for anticipated growth. Without such tools, quality clinical-image delivery may not be what it should.