Polydopamine conjugated SiO2 nanoparticles as potential drug carriers for melanoma treatment.

Silica nanoparticles (SiO2) are increasingly investigated for biomedical applications. Aim: This study aimed to analyze the potential use of a SiO2 nanoparticles coated with biocompatible polydopamine (SiO2@PDA) as a potential chemotherapeutic drug carrier. Materials & methods: SiO2 morphology and PDA adhesion was analyzed by dynamic light scattering, electron microscopy and nuclear magnetic resonance. Cytotoxicity studies and morphology analyses (immunofluorescence, scanning and transmission electron microscopy) were used to assess the cellular reaction to the SiO2@PDA nanoparticles and to identify a biocompatible (safe use) window. Results & conclusion: Concentrations above 10 µg/ml and up to 100 µg/ml SiO2@PDA showed the best biocompatibility on human melanoma cells at 24 h and represent a potential drug carrier template for targeted melanoma cancer treatment.

Tiny particles can be small enough to enter cells. This is why they may be useful in the treatment of cancer. We made particles in a way that is friendly for human cells, then we analyzed their effects on cancer cells. Our tests showed that these particles could be useful for treatment because they do not worsen cancer cells. This is important because sometimes after treatment, cancer cells can become more dangerous. This way, even if the drug did not work, the cancer will not worsen.

Exploiting Enzyme in the Polymer Synthesis for a Remarkable Increase in Thermal Conductivity.

The interest in polymers with high thermal conductivity increased much because of their inherent properties such as low density, low cost, flexibility, and good chemical resistance. However, it is challenging to engineer plastics with good heat transfer characteristics, processability, and required strength. Improving the degree of the chain alignment and forming a continuous thermal conduction network is expected to enhance thermal conductivity. This research aimed to develop polymers with a high thermal conductivity that can be interesting for several applications. Two polymers, namely poly(benzofuran-co-arylacetic acid) and poly(tartronic-co-glycolic acid), with high thermal conductivity containing microscopically ordered structures were prepared by performing enzyme-catalyzed (Novozyme-435) polymerization of the corresponding α-hydroxy acids 4-hydroxymandelic acid and tartronic acid, respectively. A comparison between the polymer's structure and heat transfer obtained by mere thermal polymerization before and enzyme-catalyzed polymerization will now be discussed, revealing a dramatic increase in thermal conductivity in the latter case. The polymer structures were investigated by FTIR spectroscopy, nuclear magnetic resonance (NMR) spectroscopy in liquid- and solid-state (ss-NMR), and powder X-ray diffraction. The thermal conductivity and diffusivity were measured using the transient plane source technique.

Oxidative Polymerization of 3,4-Dihydroxybenzylamine─The Lower Homolog of Dopamine.

Polydopamine (PDA) formed by oxidative polymerization of dopamine has attracted wide interest because of its unique properties, in particular its strong adhesion to almost all types of surfaces. 3,4-Dihydroxybenzylamine (DHBA) as the lower homolog of PDA also contains a catechol unit and an amino group and thus can be expected to exhibit a similar adhesion and reaction behavior. In fact, autoxidation of DHBA with air in 2-amino-2-hydroxymethyl-propane-1,3-diol (Tris) buffer gives rise to deeply colored oligomer/polymer products (poly(3,4-dihydroxybenzylamine) (PDHBA)) that strongly adhere to several surfaces. Here, the material is characterized by solid-state NMR spectroscopy, Fourier transform infrared (FTIR) spectroscopy, X-ray photoelectron spectroscopy (XPS), electron spin resonance (ESR) spectroscopy, mass spectrometry, and atomic force microscopy (AFM). Reaction pathways were rationalized taking into consideration the analytical results that show similarity to PDA chemistry, but also considering differences, leading to a more complex reaction behavior and thus to new structures not found in PDA.

Magnetic Nanoclusters Stabilized with Poly[3,4-Dihydroxybenzhydrazide] as Efficient Therapeutic Agents for Cancer Cells Destruction.

Magnetic structures exhibiting large magnetic moments are sought after in theranostic approaches that combine magnetic hyperthermia treatment (MH) and diagnostic magnetic resonance imaging in oncology, since they offer an enhanced magnetic response to an external magnetic field. We report on the synthesized production of a core-shell magnetic structure using two types of magnetite nanoclusters (MNC) based on a magnetite core and polymer shell. This was achieved through an in situ solvothermal process, using, for the first time, 3,4-dihydroxybenzhydrazide (DHBH) and poly[3,4-dihydroxybenzhydrazide] (PDHBH) as stabilizers. Transmission electron microscopy (TEM) analysis showed the formation of spherical MNC, X-ray photoelectronic spectroscopy (XPS) and Fourier transformed infrared (FT-IR) analysis proved the existence of the polymer shell. Magnetization measurement showed saturation magnetization values of 50 emu/g for PDHBH@MNC and 60 emu/g for DHBH@MNC with very low coercive field and remanence, indicating that the MNC are in a superparamagnetic state at room temperature and are thus suitable for biomedical applications. MNCs were investigated in vitro, on human normal (dermal fibroblasts-BJ) and tumor (colon adenocarcinoma-CACO2, and melanoma-A375) cell lines, in view of toxicity, antitumor effectiveness and selectivity upon magnetic hyperthermia. MNCs exhibited good biocompatibility and were internalized by all cell lines (TEM), with minimal ultrastructural changes. By means of flowcytometry apoptosis detection, fluorimetry, spectrophotometry for mitochondrial membrane potential, oxidative stress, ELISA-caspases, and Western blot-p53 pathway, we show that MH efficiently induced apoptosis mostly via the membrane pathway and to a lower extent by the mitochondrial pathway, the latter mainly observed in melanoma. Contrarily, the apoptosis rate was above the toxicity limit in fibroblasts. Due to its coating, PDHBH@MNC showed selective antitumor efficacy and can be further used in theranostics since the PDHBH polymer provides multiple reaction sites for the attachment of therapeutic molecules.

New insight into catechol photochemistry: the role of different monomer and dimer configurations in radiation-less decay of the S1 electronic excited state.

The equilibrium geometries of the ground and first electronic excited states as well as the radiation-less deactivation channels of catechol in its monomer and dimer configurations were investigated using the standard linear-response and the spin-flipped TDDFT, multireference CASSCF as well as the similarity transformed equation-of-motion coupled cluster built with the domain-based local pair natural orbitals (DLPNO-STEOM-CCSD) methods. For the monomer, it was found that there is a new conical intersection geometry that can explain why catechol exhibits different photochemical behavior. This deactivation pathway involves almost simultaneously, an excited state intramolecular proton transfer between the two O atoms and an O-H bond breaks at the proton that is not between the two O atoms. From an energy balance point of view, these geometries are not associated with high potential barriers, so radiation-less relaxation can be achieved through these geometries. For the cyclohexane solvent, the lowest CI geometry shows an energy gap of about 4 kcal mol-1 lower than that found for acetonitrile, making the relaxation even more easier. In the case of catechol dimer structures, several so-called dimer-type CI geometries were found where both monomers exhibit substantial geometric distortions together with the formation of a weaker C-C bond between the two catechol monomers. These CI geometries are energetically more favorable and, in the case of aggregation processes, more likely to decay the excited states of the catechol through these radiation-less deactivation channels than those found for the monomer.

Dopamine Photochemical Behaviour under UV Irradiation.

To understand the photochemical behaviour of the polydopamine polymer in detail, one would also need to know the behaviour of its building blocks. The electronic absorption, as well as the fluorescence emission and excitation spectra of the dopamine were experimentally and theoretically investigated considering time-resolved fluorescence spectroscopy and first-principles quantum theory methods. The shape of the experimental absorption spectra obtained for different dopamine species with standard, zwitterionic, protonated, and deprotonated geometries was interpreted by considering the advanced equation-of-motion coupled-cluster theory of DLPNO-STEOM. Dynamical properties such as fluorescence lifetimes or quantum yield were also experimentally investigated and compared with theoretically predicted transition rates based on Fermi's Golden Rule-like equation. The results show that the photochemical behaviour of dopamine is strongly dependent on the concentration of dopamine, whereas in the case of a high concentration, the zwitterionic form significantly affects the shape of the spectrum. On the other hand, the solvent pH is also a determining factor for the absorption, but especially for the fluorescence spectrum, where at lower pH (5.5), the protonated and, at higher pH (8.0), the deprotonated forms influence the shape of the spectra. Quantum yield measurements showed that, besides the radiative deactivation mechanism characterized by a relatively small QY value, non-radiative deactivation channels are very important in the relaxation process of the electronic excited states of different dopamine species.

Micro- and nano-tubules built from loosely and tightly rolled up thin sheets.

Tubular structures built from amphiphilic molecules are of interest for nano-sensing, drug delivery, and structuring of oils. In this study, we characterized the tubules built in aqueous suspensions of a cholesteryl nucleoside conjugate, cholesterylaminouridine (CholAU) and phosphatidylcholines (PCs). In mixtures with unsaturated PCs having chain lengths comparable to the length of CholAU, two different types of tubular structures were observed; nano- and micro-tubules had average diameters in the ranges 50-300 nm and 2-3 µm, respectively. Using cryo scanning electron microscopy (cryo-SEM) we found that nano- and micro-tubules differed in their morphology: the nano-tubules were densely packed, whereas micro-tubules consisted of loosely rolled undulated lamellas. Atomic force microscopy (AFM) revealed that the nano-tubules were built from 4 to 5 nm thick CholAU-rich bilayers, which were in the crystalline state. Solid-state (2)H NMR spectroscopy also confirmed that about 25% of the total CholAU, being about the fraction of CholAU composing the tubules, formed the rigid crystalline phase. We found that CholAU/PC tubules can be functionalized by molecules inserted into lipid bilayers and fluorescently labeled PCs and lipophilic nucleic acids inserted spontaneously into the outer layer of the tubules. The tubular structures could be loaded and cross-linked, e.g. by DNA hybrids, and, therefore, are of interest for further development, e.g. as a depot scaffold for tissue regeneration.

Magnetic microgels, a promising candidate for enhanced magnetic adsorbent particles in bioseparation: synthesis, physicochemical characterization, and separation performance.

For specific applications in the field of high gradient magnetic separation of biomaterials, magnetic nanoparticle clusters of controlled size and high magnetic moment in an external magnetic field are of particular interest. We report the synthesis and characterization of magnetic microgels designed for magnetic separation purposes, as well as the separation efficiency of the obtained microgel particles. High magnetization magnetic microgels with superparamagnetic behaviour were obtained in a two-step synthesis procedure by a miniemulsion technique using highly stable ferrofluid on a volatile nonpolar carrier. Spherical clusters of closely packed hydrophobic oleic acid-coated magnetite nanoparticles were coated with cross linked polymer shells of polyacrylic acid, poly-N-isopropylacrylamide, and poly-3-acrylamidopropyl trimethylammonium chloride. The morphology, size distribution, chemical surface composition, and magnetic properties of the magnetic microgels were determined using transmission electron microscopy, X-ray photoelectron spectroscopy, and vibrating sample magnetometry. Magnetically induced phase condensation in aqueous suspensions of magnetic microgels was investigated by optical microscopy and static light scattering. The condensed phase consists of elongated oblong structures oriented in the direction of the external magnetic field and may grow up to several microns in thickness and tens or even hundreds of microns in length. The dependence of phase condensation magnetic supersaturation on the magnetic field intensity was determined. The experiments using high gradient magnetic separation show high values of separation efficiency (99.9-99.97%) for the magnetic microgels.