Harnessing carboxymethyl cellulose and Moringa oleifera seed husks for sustainable treatment of a multi-metal real waste.

This study aimed to evaluate effective treatment strategies for laboratory waste with an initial pH of 1.0, containing Cr6+, Mn2+, Co2+, Fe3+, Ni2+, Cu2+, Zn2+, Sr2+, Hg2+, and Pb2+ ions, focusing on flocculation, precipitation, and adsorption techniques. The study utilized microparticles derived from Moringa oleifera seed husks (MS), cryogels of carboxymethyl cellulose (CMC), and hybrid cryogels combining CMC and MS (CMC-MS25 and CMC-MS50) as adsorbents. The optimal strategy involved raising the pH to 7 using NH4OH, leading to the partial precipitation of metal ions. The remaining supernatant was then passed through columns packed with the aforementioned adsorbents. Utilizing CMC-MS25 and CMC-MS50 adsorbents resulted in the simultaneous removal of over 90% of the targeted metal ions. The adsorption of Cu2+ ions onto the adsorbents was facilitated by electrostatic interactions between Cu2+ ions and carboxylate groups, as well as Cu-OH chelation, as confirmed by X-ray photoelectron spectroscopy. Under optimized conditions, the fixed-bed column adsorption capacity was determined as 88.2 mg g-1. The CMC-MS25 adsorbents proved reusable at least 5 times, with the recovered Cu2+ ions potentially suitable for other processes. The scalability and feasibility of producing these novel adsorbents suggest a promising, cost-effective solution for treating complex matrices and recovering high-value metals, as copper.

Rheological and mechanical properties of hydroxypropyl methylcellulose-based hydrogels and cryogels controlled by AOT and SDS micelles.

HYPOTHESIS: The type and concentration of surfactants affect the rheological behavior of hydroxypropyl methylcellulose (HPMC) chains in hydrogels, influencing the microstructure and mechanical properties of HPMC cryogels. EXPERIMENTS: Hydrogels and cryogels containing HPMC, AOT (bis (2-ethylhexyl) sodium sulfosuccinate or dioctyl sulfosuccinate salt sodium, two C8 chains and sulfosuccinate head group), SDS (sodium dodecyl sulfate, one C12 chain and sulfate head group), and sodium sulfate (salt, no hydrophobic chain) at different concentrations were investigated using small-angle X-ray scattering (SAXS), scanning electron microscopy (SEM), rheological measurements, and compressive tests. FINDINGS: SDS micelles bound to the HPMC chains building "bead necklaces", increasing considerably the storage modulus G' values of the hydrogels and the compressive modulus E values of the corresponding cryogels. The dangling SDS micelles promoted multiple junction points among the HPMC chains. AOT micelles and HPMC chains did not form "bead necklaces". Although AOT increased the G' values of the hydrogels, the resulting cryogels were softer than pure HPMC cryogels. The AOT micelles are probably embedded between HPMC chains. The AOT short double chains rendered softness and low friction to the cryogel cell walls. Therefore, this work demonstrated that the structure of the surfactant tail can tune the rheological behavior of HPMC hydrogels and hence the microstructure of the resulting cryogels.

Caffeine Release from Magneto-Responsive Hydrogels Controlled by External Magnetic Field and Calcium Ions and Its Effect on the Viability of Neuronal Cells.

Caffeine (CAF) is a psychostimulant present in many beverages and with rapid bioabsorption. For this reason, matrices that effectuate the sustained release of a low amount of CAF would help reduce the intake frequency and side effects caused by high doses of this stimulant. Thus, in this study, CAF was loaded into magnetic gelatin/alginate (Gel/Alg/MNP) hydrogels at 18.5 mg/ghydrogel. The in vitro release of CAF was evaluated in the absence and presence of an external magnetic field (EMF) and Ca2+. In all cases, the presence of Ca2+ (0.002 M) retarded the release of CAF due to favorable interactions between them. Remarkably, the release of CAF from Gel/Alg/MNP in PBS/CaCl2 (0.002 M) at 37 °C under an EMF was more sustained due to synergic effects. In PBS/CaCl2 (0.002 M) and at 37 °C, the amounts of CAF released after 45 min from Gel/Alg and Gel/Alg/MNP/EMF were 8.3 ± 0.2 mg/ghydrogel and 6.1 ± 0.8 mg/ghydrogel, respectively. The concentration of CAF released from Gel/Alg and Gel/Alg/MNP hydrogels amounted to ~0.35 mM, thereby promoting an increase in cell viability for 48 h. Gel/Alg and Gel/Alg/MNP hydrogels can be applied as reservoirs to release CAF at suitable concentrations, thus forestalling possible side effects and improving the viability of SH-SY5Y cells.

Improved anti-inflammatory properties of xanthan gum hydrogel physically and chemically modified with yeast derived peptide.

Bioactive peptides from natural resources with associated beneficial biological properties such as skin wound healing have drawn much attention. Polysaccharides with their biocompatibility, biodegradability, and ease of modification are suitable carriers for peptides delivery to the wound. In this study, a polysaccharide-peptide system was designed for potential wound healing applications. Xanthan hydrogels were modified with the yeast-derived peptide VW-9 with known biological properties via chemical conjugation using carbodiimide chemistry (XG-g-VW-9) or physically incorporation (XG-p-VW-9). Grafting VW-9 to the hydrogels increased the hydrogels' swelling degree and the release of the peptide from the hydrogels followed the Higuchi model indicating the peptide diffusion from the hydrogel matrix without hydrogel matrix dissolution. Both hydrogels were cytocompatible toward the tested fibroblast and macrophage cells. XG-p-VW-9 and XG-g-VW-9 reduce the level of tumor necrosis factor-alpha and interleukin-6 in cells activated with lipopolysaccharide more efficiently than free VW-9. Thus, VW-9-modified xanthan hydrogels may have the potential to be considered for skin wound healing.

Flexible translucent persistent luminescent films based on Sr2MgSi2O7:Eu2+,Dy3+ cellulose ether composites.

Persistent luminescent materials are present in several recent studies on new applications and novel properties. In this work, we demonstrate, for the first time, the production of translucent flexible persistent composites based on Sr2MgSi2O7:Eu2+,Dy3+ (SMSO) into cellulose ether matrix film. The composite was successfully prepared through a new optimized route of co-precipitation and microwave-assisted annealing followed by (3-aminopropyl)triethoxysilane (APTES) coating and dispersion in hydroxypropyl methylcellulose (HPMC). The SMSO@APTES/HPMC films show persistent luminescence emission at 475 nm (blue) and high transmittance in the visible range. To understand the fine distribution of the nanoparticles in the matrix, we have investigated their structure and dispersion by using Synchrotron Radiation X-ray fluorescence mapping and Scanning Transmission X-ray Microscopy. This innovative composite could bring new perspectives for the class of persistent luminescence materials, enhancing technologies in progress throwing light on new applications never perceived.

Vanillin crosslinked chitosan films: The states of water and the effect of carriers on curcumin uptake.

In this work, chitosan chains were crosslinked with different contents of vanillin (Van), characterized and loaded with curcumin (CUR), a hydrophobic drug. Sodium dodecyl sulfate (SDS), Tween 20® (T20) and ß-cyclodextrin (ßCD) were used as curcumin carriers. Films prepared with Van 20 % yielded gel content of 70 %, swelling degree of ~23 gwater/g, bound water and capillary water, as revealed by Time-Domain Nuclear Magnetic Resonance measurements. Films prepared with higher Van contents showed small swelling degree (< 1.6 gwater/g) and hydrophobicity, making them inadequate for drug loading. UV-Vis and fluorescence spectroscopic studies indicated that Van 20 % combined with SDS and SDS/ßCD presented the highest CUR uptake (~3.0 mg/g), favored by electrostatic interactions and hydrophobic interactions. CHI and Van 20 % films did not present any cytotoxicity in human neuroblastoma SH-SY5Y cells. At pH 1.0 the films were completely soluble, pointing to their potential application as gastric delivery systems for hydrophobic drugs. Chemical compounds studied in the manuscript: Chitosan, vanillin, curcumin, ß-cyclodextrin, sodium dodecyl sulfate, polyethylene glycol sorbitan monolaurate.

Effects of Magnetite Nanoparticles and Static Magnetic Field on Neural Differentiation of Pluripotent Stem Cells.

Neurodevelopmental processes of pluripotent cells, such as proliferation and differentiation, are influenced by external natural forces. Despite the presence of biogenic magnetite nanoparticles in the central nervous system and constant exposure to the Earth's magnetic fields and other sources, there is scant knowledge regarding the role of electromagnetic stimuli in neurogenesis. Moreover, emerging applications of electrical and magnetic stimulation to treat neurological disorders emphasize the relevance of understanding the impact and mechanisms behind these stimuli. Here, the effects of magnetic nanoparticles (MNPs) in polymeric coatings and the static external magnetic field (EMF) were investigated on neural induction of murine embryonic stem cells (mESCs) and human induced pluripotent stem cells (hiPSCs). The results show that the presence of 0.5% MNPs in collagen-based coatings facilitates the migration and neuronal maturation of mESCs and hiPSCs in vitro. Furthermore, the application of 0.4 Tesla EMF perpendicularly to the cell culture plane, discernibly stimulates proliferation and guide fate decisions of the pluripotent stem cells, depending on the origin of stem cells and their developmental stage. Mechanistic analysis reveals that modulation of ionic homeostasis and the expression of proteins involved in cytostructural, liposomal and cell cycle checkpoint functions provide a principal underpinning for the impact of electromagnetic stimuli on neural lineage specification and proliferation. These findings not only explore the potential of the magnetic stimuli as neural differentiation and function modulator but also highlight the risks that immoderate magnetic stimulation may affect more susceptible neurons, such as dopaminergic neurons.

Efficiency of air-dried and freeze-dried alginate/xanthan beads in batch, recirculating and column adsorption processes.

Alginate (Alg) beads are low-cost adsorbents used for wastewater remediation. In this work, alginate (Alg) and alginate/xanthan (Alg/XG) blend beads were synthesized by gelation method into calcium chloride and freeze-dried to improve the porosity. Their adsorption efficiency was tested for methylene blue (MB) dye in batch, recirculating and column adsorption systems. The blend beads were characterized using by SEM, FTIR-ATR and X-ray microcomputer tomography (Micro-CT) analyzes. Freeze-dried Alg and Alg/XG beads presented porosity of 46 ± 5% and 77 ± 3%, respectively. Adsorption isotherms of MB on freeze-dried Alg/XG beads indicated better adsorption capacity in comparison to the air-dried ones. Adsorption kinetics and breakthrough curves based on recirculating and vertical column adsorption processes of MB on freeze dried Alg/XG and air-dried Alg/XG beads indicated higher efficiency for the vertical column system packed with freeze dried Alg/XG beads. The removal efficiency of 91% MB by the freeze-dried Alg/XG beads in vertical column remained even after four consecutive adsorption-desorption cycles, disclosing these beads as potential systems for the wastewater treatment.

Tuning the Mechanical and Thermal Properties of Hydroxypropyl Methylcellulose Cryogels with the Aid of Surfactants.

The mechanical and thermal properties of cryogels depend on their microstructure. In this study, the microstructure of hydroxypropyl methylcellulose (HPMC) cryogels was modified by the addition of ionic (bis (2-ethylhexyl) sodium sulfosuccinate, AOT) and non-ionic (Kolliphor® EL) surfactants to the precursor hydrogels (30 g/L). The surfactant concentrations varied from 0.2 mmol/L to 3.0 mmol/L. All of the hydrogels presented viscous behavior (G″ > G'). Hydrogels containing AOT (c > 2.0 mmol/L) led to cryogels with the lowest compressive modulus (13 ± 1 kPa), the highest specific surface area (2.31 m2/g), the lowest thermal conductivity (0.030 W/(m·°C)), and less hygroscopic walls. The addition of Kolliphor® EL to the hydrogels yielded the stiffest cryogels (320 ± 32 kPa) with the lowest specific surface area (1.11 m2/g) and the highest thermal conductivity (0.055 W/(m·°C)). Density functional theory (DFT) calculations indicated an interaction energy of -31.8 kcal/mol due to the interaction between the AOT sulfonate group and the HPMC hydroxyl group and the hydrogen bond between the AOT carbonyl group and the HPMC hydroxyl group. The interaction energy between the HPMC hydroxyl group and the Kolliphor® EL hydroxyl group was calculated as -7.91 kcal/mol. A model was proposed to describe the effects of AOT or Kolliphor® EL on the microstructures and the mechanical/thermal properties of HPMC cryogels.

The states of water in tryptophan grafted hydroxypropyl methylcellulose hydrogels and their effect on the adsorption of methylene blue and rhodamine B.

Tryptophan (Trp) decorated hydroxypropyl methylcellulose (HPMC) cryogels were prepared by a one-step reaction with citric acid. The increase of Trp content in the 3D network from 0 to 2.18 wt% increased the apparent density from 0.0267 g.cm-3 to 0.0381 g.cm-3 and the compression modulus from 94 kPa to 201 kPa, due to hydrophobic interactions between Trp molecules. The increase of Trp content in HPMC-Trp hydrogels increased the amount of non-freezing water, estimated from differential scanning calorimetry, and the amount of freezing water, which was determined by time-domain nuclear magnetic resonance. The adsorption capacity of methylene blue (MB) and rhodamine B (RB) on HPMC-Trp hydrogels increased with Trp content and the amount of freezing water. HPMC-Trp hydrogels could be recycled 6 times keeping the original adsorptive capacity. The diffusional constants of MB and RB tended to increase with Trp content. RB adsorbed on HPMC-Trp hydrogels presented a bathochromic shift of fluorescence.

Development of a methodology for reversible chemical modification of silicon surfaces with application in nanomechanical biosensors.

Hypervalent tellurium compounds have a particular reactivity towards thiol compounds which are related to their biological properties. In this work, this property was assembled to tellurium-functionalized surfaces. These compounds were used as linkers in the immobilization process of thiolated biomolecules (such as DNA) on microcantilever surfaces. The telluride derivatives acted as reversible binding agents due to their redox properties, providing the regeneration of microcantilever surfaces and allowing their reuse for further biomolecules immobilizations, recycling the functional surface. Initially, we started from the synthesis of 4-((3-((4-methoxyphenyl) tellanyl) phenyl) amino)-4-oxobutanoic acid, a new compound, which was immobilized on a silicon surface. In nanomechanical systems, the detection involved a hybridization study of thiolated DNA sequences. Fluorescence microscopy technique was used to confirm the immobilization and removal of the telluride-DNA system and provided revealing results about the potentiality of applying redox properties to chalcogen derivatives at surfaces.

Hydrophilic, hydrophobic, Janus and multilayer xanthan based cryogels.

Xanthan gum (XG) was applied for the creation of hydrophilic, hydrophobic and layered cryogels. Firstly, the correlation among synthesis parameters, such as solvent composition and polymer concentration (Cp) in the precursor gel and mold diameter (Φ), with physicochemical properties and morphological parameters of resulting hydrophilic XG cryogels was investigated. The addition of acetic acid to the precursor led to stiffer XG cryogels. The reduction of Cp and Φ promoted the increase in the cryogels surface area and porosity. Then, XG cryogels were silanized in order to produce hydrophobic cryogels, which presented sorption capacities for diesel, mineral and sunflower oils of 28 ±â€¯2 g/g, 16 ±â€¯2 g/g and 5.2 ±â€¯0.3 g/g, respectively. The hydrophobic XG cryogels were considerably more efficient to remove ethinyl estradiol, an estrogenic pollutant, from liquid media than the hydrophilic cryogels. Hydrophilic and hydrophobic XG cryogels presented similar capacity to remove bisphenol A, another estrogenic pollutant, from liquid media. A new family of alternated hydrophobic/hydrophilic "Janus" like and multilayered cryogels was created and applied in mixtures of diesel oil and water or oil/water emulsions. The "Janus" like and multilayered cryogels remained at the interface, where the hydrophobic and hydrophilic layers adsorbed oil and water selectively.

Magnetically triggered release of amoxicillin from xanthan/Fe3O4/albumin patches.

This work was motivated by the need of stimuli responsive drug carriers, which can be activated by low cost non-invasive stimuli such as external magnetic field (EMF). Thus, novel antimicrobial materials based on xanthan gum (XG), magnetic nanoparticles (MNP), bovine serum albumin (BSA) and amoxicillin (Amox) were designed in order to promote the release of Amox under magnetic stimuli. Firstly, surfaces with different functionalities were prepared by sequential deposition of thin layers on Si wafers and characterized by means of ellipsometry and atomic force microscopy. Amox adsorbed preferentially onto XG or BSA films. In solution, favorable interactions between Amox and BSA were evidenced by substantial changes in the BSA secondary structure, as revealed by circular dichroism. Patches of XG and XG/MNP/BSA were immersed in 2 g L-1 Amox, yielding 10 ±â€¯3 and 17 ±â€¯4 µg/cm3 Amox loading, respectively. The inclusion of 0.2 wt% Fe3O4 in the patches and their exposure to EMF enabled in vitro release of Amox, at pH 5.5 and 0.02 mol L-1 NaCl, following the quasi-Fickian behavior. Amox diffused from XG/MNP/BSA patches in agar medium containing Staphylococcus aureus and Escherichia coli, inhibiting their growth. The inhibition of E. coli growth was particularly efficient under EMF.

Hybrid magnetic scaffolds: The role of scaffolds charge on the cell proliferation and Ca2+ ions permeation.

Magnetic scaffolds with different charge densities were prepared using magnetic nanoparticles (MNP) and xanthan gum (XG), a negatively charged polysaccharide, or hydroxypropyl methylcellulose (HPMC), an uncharged cellulose ether. XG chains were crosslinked with citric acid (cit), a triprotic acid, whereas HPMC chains were crosslinked either with cit or with oxalic acid (oxa), a diprotic acid. The scaffolds XG-cit, HPMC-cit and HPMC-oxa were characterized by scanning electron microscopy (SEM), inductively coupled plasma atomic emission spectroscopy (ICP-AES), superconducting quantum interference device (SQUID) magnetometry, contact angle and zeta-potential measurements. In addition, the flux of Ca2+ ions through the scaffolds was monitored by using a potentiometric microsensor. The adhesion and proliferation of murine fibroblasts (NIH/3T3) on XG-cit, XG-cit-MNP, HPMC-cit, HPMC-cit-MNP, HPMC-oxa and HPMC-oxa-MNP were evaluated by MTT assay. The magnetic scaffolds presented low coercivity (<25Oe). The surface energy values determined for all scaffolds were similar, ranging from 43mJm-2 to 46mJm-2. However, the polar component decreased after MNP incorporation and the dispersive component of surface energy increased in average 1mJm-2 after MNP incorporation. The permeation of Ca2+ ions through XG-cit-MNP was significantly higher in comparison with that on XG-cit and HPMC-cit scaffolds, but through HPMC-cit-MNP, HPMC-oxa and HPMC-oxa-MNP scaffolds it was negligible within the timescale of the experiment. The adhesion and proliferation of fibroblasts on the scaffolds followed the trend: XG-cit-MNP>XG-cit>HPMC-cit, HPMC-cit-MNP, HPMC-oxa, HPMC-oxa-MNP. A model was proposed to explain the cell behavior stimulated by the scaffold charge, MNP and Ca2+ ions permeation.

Hydroxypropyl Methylcellulose Sponges for the Adsorption of Estrogenic Pollutant.

Hydroxypropyl methylcellulose (HPMC) E4M chains are crosslinked with citric acid and ethylenediaminetetraacetic acid (EDTA), resulting in adsorbent sponges (SpE4M), which are impregnated with magnetic nanoparticles (SpE4M-mag) for the adsorption of 17 α-ethinyl estradiol (EE). The characterization of SpE4M and SpE4M-mag characterization includes X-ray microcomputer tomography (Micro-CT), scanning electron microscopy (SEM), Fourier transform infrared (FTIR) vibrational spectroscopy, elemental analysis, inductively coupled plasma optical emission spectrometry (ICP-OES), and X-ray diffraction (XRD). SpE4M and SpE4M-mag present porosities of 72±6 % and 80±7 %, respectively, and outstanding stability in water, in the pH range 4 to 8, and in alcohols, alkanes, and acetone. The compressive moduli of SpE4M and SpE4M-mag amount to 2.75 and 4.37 MPa, respectively. The adsorption of 17 α-ethinyl estradiol (EE), an estrogenic pollutant, on SpE4M and SpE4M-mag follows the pseudo-first-order kinetic model. The EE removal capacity by SpE4M is 78±5 %, which is twice that presented by SpE4M-mag. The new sponges are recovered successfully either by flotation or by an external magnet, and can be recycled five times keeping 80 % of their initial removal capacity after the fifth cycle, disclosing their potential for environmental remediation.

Hydroxypropyl methylcellulose based aerogels: Synthesis, characterization and application as adsorbents for wastewater pollutants.

Hydroxypropyl methylcellulose (HPMC) E4M and J5MS samples with degrees of substitution of methyl groups (DS) 1.9 and 1.5, respectively, and molar substitutions of hydroxypropyl groups (MS) 0.25 and 0.75, respectively, were used to create aerogels in the presence of citric (cit), oxalic (oxa) or terephthalic (ter) acids, as crosslinkers. E4M-cit, J5MS-cit and J5MS-oxa aerogels presented outstanding stability in water, acid media, alcohols, acetone and hydrocarbons, density values of∼(0.020±0.002)g/cm3, compressive modulus ranging from (111±9)kPa to (133±11)kPa. On the other hand, E4M-oxa, E4M-ter and J5MS-ter aerogels were not adequate adsorbents because they collapsed in water. The adsorption behavior of 17α-ethinyl estradiol (EE) and methylene blue (MB) onto E4M-cit, J5MS-cit and J5MS-oxa aerogels were fitted to Freundlich model, indicating higher affinity of EE for J5MS-cit and J5MS-oxa and higher affinity of MB for E4M-cit aerogels. HPMC aeorogels could be successfully reused.

Evaluation of calcium alginate beads for Ce, La and Nd preconcentration from groundwater prior to ICP OES analysis.

Analytical methods for the determination of rare earth elements (REE) in natural waters by plasma spectrochemical techniques often require sample preparation procedures for analytes preconcentration as well as for removing matrix constituents, that may interfere on the analytical measurements. In the present work, calcium alginate (CA) beads were used for the first time aiming at Ce, La and Nd preconcentration from groundwater samples for further determination by inductively coupled plasma optical emission spectrometry (ICP OES). Test samples were analyzed in batch mode by transferring a 40mL test portion (pH=5±0.2) into a 50mL polyethylene flask containing 125mg CA beads. After 15min contact, the analytes were quantitatively extracted from the loaded CA beads with 2.0mL of 1.0molL-1 HCl solution for further determination by ICP OES, using Ce (II) 456.236, La (II) 379.478 and Nd (II) 430.358nm emission lines. The proposed approach is a reliable alternative for REE single-stage preconcentration from aqueous samples, as it provided accurate results based on the addition and recovery analysis of groundwater. The results obtained by the proposed method were also compared with those from reference method based on inductively coupled plasma mass spectrometry (ICP-MS) and no significant differences were observed after applying the Student's t-test at 95% confidence level.

Adsorption of the antimicrobial peptide tritrpticin onto solid and liquid surfaces: Ion-specific effects.

Developing functional biointerfaces is important for technological applications. We investigated the interaction and adsorption of the antimicrobial peptide tritrpticin (VRRFPWWWPFLRR, TRP3) onto solid and liquid surfaces and the influence of ions on these processes by several techniques. Surface tension measurements showed that salt addition to TRP3 solution causes a high decrease of surface tension due to the adsorption of TRP3 at air-liquid surface. Ellipsometry studies show the TRP3 adsorption on silicon surfaces forming nanometric films that are able to further interact with liposomes. Contact angle measurements gave insight on the nature of thin film and its roughness. AFM shows the topology of the film on the solid substrates. In addition, those techniques also showed that anions can act as modulators on adsorption phenomena and are correlated with the Hofmeister series. The findings of the current work are relevant for the development of functional interfaces such as biocidal surfaces.

Neuronal adhesion, proliferation and differentiation of embryonic stem cells on hybrid scaffolds made of xanthan and magnetite nanoparticles.

Hybrid scaffolds made of xanthan and magnetite nanoparticles (XCA/mag) were prepared by dipping xanthan membranes (XCA) into dispersions of magnetic nanoparticles for different periods of time. The resulting hybrid scaffolds presented magnetization values ranging from 0.25 emu g(-1) to 1.80 emu g(-1) at 70 kOe and corresponding iron contents ranging from 0.25% to 2.3%, respectively. They were applied as matrices for in vitro embryoid body adhesion and neuronal differentiation of embryonic stem cells; for comparison, neat XCA and commercial plastic plates were also used. Adhesion rates were more pronounced when cells were seeded on XCA/mag than on neat XCA or plastic dishes; however, proliferation levels were independent from those of the scaffold type. Embryonic stem cells showed similar differentiation rates on XCA/mag scaffolds with magnetization of 0.25 and 0.60 emu g(-1), but did not survive on scaffolds with 1.80 emu g(-1). Differentiation rates, expressed as the number of neurons obtained on the chosen scaffolds, were the largest on neat XCA, which has a high density of negative charge, and were smallest on the commercial plastic dishes. The local magnetic field inherent of magnetite particles present on the surface of XCA/mag facilitates synapse formation, because synaptophysin expression and electrical transmission were increased when compared to the other scaffolds used. We conclude that XCA/mag and XCA hydrogels are scaffolds with distinguishable performance for adhesion and differentiation of ESCs into neurons.

Multifunctional cellulose beads and their interaction with gram positive bacteria.

Cellulose beads with ∼3 mm of diameter and high circularity were obtained by dripping cellulose solutions (5, 6, and 7 wt %) dissolved in NaOH7%/urea12%, into HCl 2 M coagulation bath. Carboxylic groups were generated on beads surface through NaClO/NaClO2/TEMPO oxidation method, achieving total charge density of ∼0.77 mmol/g. Pristine (CB) and oxidized (OCB) beads were characterized by means of optical images analyses, scanning electron microscopy (SEM) and compression tests. Both types of beads, CB and OCB, were used as adsorbent for poly(4-vinyl-N-pentylpyridinium) bromide, QPVP-C5, a bactericidal agent. The adsorption of QPVP-C5 on CB and OCB was evaluated by means of FTIR-ATR, UV-vis, CHN elemental analyses, and X-ray photoelectron spectroscopy (XPS). The adsorbed amount of QPVP-C5 was remarkably higher on OCB than on CB due to ionic interactions. Desorption was less than 5%. The interaction between neat OCB or OCB coated and two different amounts of QPVP-C5 and Gram-positive bacteria Micrococcus luteus was assessed by changes in turbidimetry, SEM, and elemental analyses. Bacteria adsorbed on the surface of neat OCB and weakly QPVP-C5 coated OCB due to hydrogen bonding or ion-dipole interaction. Notorious bactericidal action was observed for OCB samples coated with large amount of QPVP-C5.