ABSTRACT
The instrumental polarization induced by a flat isotropic dielectric slab in microwave frequencies is discussed. We find that, in spite of its isotropic nature, such a dielectric can produce spurious polarization either by transmitting incoming anisotropic diffuse radiation or emitting when it is thermally inhomogeneous. We present evaluations of instrumental polarization generated by materials usually adopted in radio astronomy, by using the Mueller matrix formalism. As an application, results for different slabs in front of a 32 GHz receiver are discussed. Such results are based on measurements of their complex dielectric constants. We evaluate that a 0.33 cm thick Teflon slab introduces negligible spurious polarization (<2.6 x 10(-5) in transmission and <6 x 10(-7) in emission), even minimizing the leakage (<10(-8) from Q to U Stokes parameters, and vice versa) and the depolarization (approximately 1.3 x 10(-3)).
ABSTRACT
Surface acoustic wave (SAW) interdigital transducers are key components in X-Y LiNbO3 acousto-optical (A-O) devices. SAW interdigital transducers (IDT's) on this substrate exhibit a high spurious resonance that may reduce the A-O efficiency. In this paper we present a detailed analysis of X-Y LiNbO3 IDT's based on a fast Green's function method (GFM). In order to correctly evaluate the spurious effects on IDT's performance, we also considered bulk terms of the Green's function. When the GFM is applied to IDT's with general topology and over a wide frequency range, the required computation time can reach quickly unacceptable values for long IDT structures. We developed a new model order reduction technique based on the singular value decomposition (SVD) for the fast generation of the IDT's frequency response. Numerical results for different configurations of X-Y LiNbO3 IDT's are in good agreement with measured data and a correct interpretation of the spurious resonance is reported. It is pointed out that bulk wave excitation may be a serious limitation in the design of efficient, wide band IDT's for A-O devices.
Subject(s)
Acoustics/instrumentation , Computer Simulation , Models, Theoretical , Niobium/chemistry , Optics and Photonics/instrumentation , Oxides/chemistry , Electric Impedance , Microelectrodes , Miniaturization , Optical Devices , Radio Waves , Sensitivity and Specificity , TransducersABSTRACT
Electromagnetic wave propagation in anisotropic inhomogeneous media is computed by a novel reduced-order model technique, which is based on the restriction of the Marcuvitz-Schwinger equations on Krylov subspaces and on the application of the singular-value decomposition. The model is derived from the standard coupled-wave method and includes both wide-angle diffraction and light scattering at dielectric interfaces. The method, currently implemented for two-dimensional problems, was applied to the analysis of different liquid-crystal test cells. Numerical results are compared with those obtained through the application of the coupled-wave method and the Jones method and with experimental microscopic measurements.
