ABSTRACT
Carboxymethyl cellulose (CMC) is obtained from Vietnamese pineapple leaf waste through etherification. By treating pineapple leaf powder with a solution of NaOH then with HNO3 at 90°C for an appropriate time, cellulose can be efficiently extracted. To obtain CMC, carboxymethylation was performed by reaction of the pineapple cellulose with chloroacetic acid at 60°C for 1.5 h. The optimal conditions for this reaction were established. The resulting CMC had a degree of substitution (DS) of 0.91. The hydrogel was prepared by graft copolymerization of acrylic acid and acrylamide to the synthesized CMC. During that reaction, N,N'methylenebisacrylamide (MBA) served as the crosslinking agent and ammonium persulfate (APS) as the initiator. The maximum hydrogel absorbencies for distilled water and 0.9 wt.% NaCl solution were relatively high, namely, 588.2 g/g and 79.3 g/g, respectively. Additionally, the water swelling and water retention behaviors of the hydrogel in soil were also investigated. The results showed that this hydrogel can be employed as a suitable moisture-holding additive in soil for cultivation purposes.
ABSTRACT
Candlenut oil (CNO) is a potentially new feedstock for biodiesel (BDF) production. In this paper, a two-step co-solvent method for BDF production from CNO was examined. Firstly, esterification of free fatty acids (FFAs) (7 wt%) present in CNO was carried out using a co-solvent of acetonitrile (30 wt%) and H2SO4 as a catalyst. The content of FFAs was reduced to 0.8 wt% in 1 h at 65°C. Subsequent transesterification of the crude oil produced was carried out using a co-solvent of acetone (20 wt%) and 1 wt% potassium hydroxide (KOH). Ester content of 99.3% was obtained at 40°C in 45 min. The water content in BDF was 0.023% upon purification using vacuum distillation at 5 kPa. The components of CNO BDF were characterized using a Fourier-transform infrared spectrometry and gas chromatography-flame ionization detector. The physicochemical properties of BDF satisfied the ASTM D6751-02 standard. The gaseous exhaust emissions from the diesel engine upon combustion of the BDF blends (B0-B100) with petrodiesel were examined. The emissions of carbon monoxide and hydrocarbons were clearly lower, but that of nitrogen oxides was higher in comparison to those from petro-diesel.
Subject(s)
Aleurites , Biofuels , Gases , Plant Oils/chemistry , Solvents/chemistry , Acetone/chemistry , Carbon Monoxide , Catalysis , Chemical Phenomena , Esterification , Fatty Acids, Nonesterified/chemistry , Flame Ionization , Hydrocarbons , Hydroxides/chemistry , Nitrogen Oxides , Potassium Compounds/chemistry , Spectroscopy, Fourier Transform Infrared , Sulfuric Acids/chemistry , Temperature , WaterABSTRACT
Biodiesel fuels (BDFs) was successfully produced from Vietnamese Jatropha curcas oil with high content of free fatty acids (FFAs) in two stages. In the first stage, the esterification process was carried out with the optimal conditions as follows; a methanol-to-FFAs molar ratio of 6:1, 1 wt% H2SO4, at a temperature of 65 °C, and using 30% (wt/wt) acetonitrile as co-solvent. This step reduced the concentration of FFAs in the reaction mixture from 15.93 to 2 wt% in 60 min. In the second stage, the transesterification process generated fatty acid methyl esters (FAMEs) with 99% efficiency was performed in 30 min with the optimal conditions as follows; a methanol-to-oil molar ratio of 6:1, 1 wt% KOH, at a temperature of 40 °C, and 20% (wt/wt) acetone as co-solvent. The produced biodiesel quality meets the standards JIS K2390 and EN 14214 regarding FAME yield, FFAs and water contents.
