Titanium Nitride Electron-Conductive Contact for Silicon Solar Cells By Radio Frequency Sputtering from a TiN Target.

Efficient and stable electron selective materials compatible with commercial production are essential to the fabrication of dopant-free silicon solar cells. In this work, we report an air-stable TiN (titanium nitride) polycrystalline film, deposited using radio frequency sputtering process, as an electron selective contact in silicon solar cells. TiN films deposited at 300 W and 1.5 mTorr exhibit a low contact resistivity of 2.0 mΩ·cm2. Furthermore, the main factors and mechanisms affecting the carrier selectivity properties are also explored. TiN layers as full area rear electron contacts in n-type silicon solar cells have been successfully implemented, even though TiN film contains some oxygen. This process yields a 17% increment in relative efficiency in comparison with reference devices (n-Si/Al contact). Hence, considering the low thermal budget, scalable technique, and low contact resistivity, the TiN layers can pave the way to fabricate high-efficiency selective contact silicon solar cells with a higher degree of reproducibility.

In situ recombination junction between p-Si and TiO2 enables high-efficiency monolithic perovskite/Si tandem cells.

Increasing the power conversion efficiency of silicon (Si) photovoltaics is a key enabler for continued reductions in the cost of solar electricity. Here, we describe a two-terminal perovskite/Si tandem design that increases the Si cell's output in the simplest possible manner: by placing a perovskite cell directly on top of the Si bottom cell. The advantageous omission of a conventional interlayer eliminates both optical losses and processing steps and is enabled by the low contact resistivity attainable between n-type TiO2 and Si, established here using atomic layer deposition. We fabricated proof-of-concept perovskite/Si tandems on both homojunction and passivating contact heterojunction Si cells to demonstrate the broad applicability of the interlayer-free concept. Stabilized efficiencies of 22.9 and 24.1% were obtained for the homojunction and passivating contact heterojunction tandems, respectively, which could be readily improved by reducing optical losses elsewhere in the device. This work highlights the potential of emerging perovskite photovoltaics to enable low-cost, high-efficiency tandem devices through straightforward integration with commercially relevant Si solar cells.

Superacid Passivation of Crystalline Silicon Surfaces.

The reduction of parasitic recombination processes commonly occurring within the silicon crystal and at its surfaces is of primary importance in crystalline silicon devices, particularly in photovoltaics. Here we explore a simple, room temperature treatment, involving a nonaqueous solution of the superacid bis(trifluoromethane)sulfonimide, to temporarily deactivate recombination centers at the surface. We show that this treatment leads to a significant enhancement in optoelectronic properties of the silicon wafer, attaining a level of surface passivation in line with state-of-the-art dielectric passivation films. Finally, we demonstrate its advantage as a bulk lifetime and process cleanliness monitor, establishing its compatibility with large area photoluminescence imaging in the process.