The State-of-the-Art of Sensors and Environmental Monitoring Technologies in Buildings.

Building energy consumption accounts for 30%-45% of the global energy demand. With an ever-increasing world population, it has now become essential to minimize the energy consumption for the future of the environment. One of the most crucial aspects in this regard is the utilization of sensing and environmental monitoring technologies in buildings as these technologies provide stakeholders, such as owners, designers, managers, and occupants, with important information regarding the energy performance, safety and cost-effectiveness of the building. With the global sensors market value predicted to exceed $190 billion by 2021 and the number of sensors deployed worldwide forecasted to reach the '1 Trillion' mark by 2025, a state-of-the-art review of various commercially-viable sensor devices and the wide range of communication technologies that complement them is highly desirable. This paper provides an insight into various sensing and environmental monitoring technologies commonly deployed in buildings by surveying different sensor technologies, wired and wireless communication technologies, and the key selection parameters and strategies for optimal sensor placement. In addition, we review the key characteristics and limitations of the most prominent battery technologies in use today, different energy harvesting sources and commercial off-the-shelf solutions, and various challenges and future perspectives associated with the application of sensing and environmental monitoring technologies within buildings.

Is the Invasive Species Listronotus bonariensis (Kuschel) (Coleoptera: Curculionidae) (Argentine Stem Weevil) a Threat to New Zealand Natural Grassland Ecosystems?

Listronotus bonariensis (Argentine stem weevil) is a stem-boring weevil that has become a major pasture pest in New Zealand, and cool climate turf grass in Australia. This species is also frequently found in native tussock grassland in New Zealand. Laboratory and field trials were established to determine the risk posed to both seedlings and established plants of three native grass species compared to what happens with a common host of this species, hybrid ryegrass (L. perenne X L. multiflorum). Adult weevil feeding damage scores were higher on Poa colensoi and Festuca novae-zelandiae than Chionochloa rigida. Oviposition was lower on P. colensoi than hybrid ryegrass, and no eggs were laid on F. novae-zelandiae. In field trials using the same four species established as spaced plants L. bonariensis laid more eggs per tiller in ryegrass in a low altitude pasture site than in ryegrass in a higher altitude site. No eggs were found on the three native grass species at the tussock sites, and only low numbers were found on other grasses at the low altitude pasture site. Despite this, numbers of adult weevils were extracted from the plants in the field trials. These may have comprised survivors of the original weevils added to the plants, together with new generation weevils that had emerged during the experiment. Irrespective, higher numbers were recovered from the tussock site plants than from those from the pasture site. It was concluded that L. bonariensis is likely to have little overall impact, but a greater impact on native grass seedling survival than on established plants.

Improved Manufacturing Performance of Screen Printed Carbon Electrodes through Material Formulation.

Printed carbon graphite materials are the primary common component in the majority of screen printed sensors. Screen printing allows a scalable manufacturing solution, accelerating the means by which novel sensing materials can make the transition from laboratory material to commercial product. A common bottleneck in any thick film printing process is the controlled drying of the carbon paste material. A study has been undertaken which examines the interaction between material solvent, printed film conductivity and process consistency. The study illustrates that it is possible to reduce the solvent boiling point to significantly increase process productivity while maintaining process consistency. The lower boiling point solvent also has a beneficial effect on the conductivity of the film, reducing the sheet resistance. It is proposed that this is a result of greater film stressing increasing charge percolation through greater inter particle contact. Simulations of material performance and drying illustrate that a multi layered printing provides a more time efficient manufacturing method. The findings have implications for the volume manufacturing of the carbon sensor electrodes but also have implications for other applications where conductive carbon is used, such as electrical circuits and photovoltaic devices.

MANAGEMENT OF DENTAL EXTRACTIONS IN PATIENTS TAKING WARFARIN AS ANTICOAGULANT TREATMENT: A SYSTEMATIC REVIEW.

OBJECTIVES: The management of patients on anticoagulation therapy is challenging. The objective of this study was to conduct a systematic review to establish the effectiveness of hemostatic interventions to prevent postoperative bleeding following dental extractions among patients taking warfarin. METHODS: A systematic review of the literature was conducted using PubMed, EMBASE and the Cochrane Central Register of Controlled Trials databases and applying relevant MeSH terms. Identified studies were screened independently by 2 reviewers using the following selection criteria: tooth extraction, patients taking warfarin as the only anticoagulant, randomized controlled trials and a hemostatic intervention. RESULTS: Six articles were included in the final review, all evaluating different interventions. Oral or local hemostatic agents were compared in 4 studies where patients continued taking warfarin before and after the procedure; in 3 studies, there were no differences between the agents in preventing postoperative bleeding and, in 1, Histoacryl glue was superior to a gelatin sponge. Two studies compared warfarin continuation with temporary discontinuation and found that continuation did not increase the risk of bleeding in patients who had an international normalized ratio (INR) within the therapeutic range. CONCLUSIONS: Patients with an INR within the therapeutic range can safely continue taking the regular dose of warfarin before dental extractions. There is no evidence to support or reject the superiority of local hemostatic agents over warfarin discontinuation.

Dynamic contact angle analysis of silicone hydrogel contact lenses.

Contact angle measurements are used to infer the clinical wetting characteristics of contact lenses. Such characterization has become more commonplace since the introduction of silicone hydrogel contact lens materials, which have been associated with reduced in vivo wetting due to the inclusion of siloxane-containing components. Using consistent methodology and a single investigator, advancing and receding contact angles were measured for 11 commercially available silicone hydrogel contact lens types with a dynamic captive bubble technique employing customized, fully automated image analysis. Advancing contact angles were found to range between 20° and 72° with the lenses falling into six statistically discrete groupings. Receding contact angles fell within a narrower range, between 17° and 22°, with the lenses segregated into three groups. The relationship between these laboratory measurements and the clinical performance of the lenses requires further investigation.

No unintended impacts of transgenic pine (Pinus radiata) trees on above ground invertebrate communities.

As part of an investigation into the potential unintended ecological impacts of transgenic trees, invertebrates were sampled from a field trial of transgenic Pinus radiata D. Don carrying the expressed antibiotic resistance marker gene neomycin phosphotransferase II (nptII) along with other genes known to affect reproductive development in plants and from nontransformed control trees. Invertebrate species abundance, richness, diversity, and composition were measured and compared among trees of five different transclones and nontransformed isogenic control trees. Invertebrates were sampled at six-monthly intervals over a period of 2 yr. In total, 19,162 individuals were collected comprising 279 invertebrate recognizable taxonomic units. Total invertebrate populations as well as populations of herbivorous lepidopteran larvae and Hemiptera were compared among transgenic and control trees. The results show that the transclones had no significant unintended influence on species abundance, richness, diversity, or composition for all populations investigated.

Distribution and residual activity of two insecticidal proteins, avidin and aprotinin, expressed in transgenic tobacco plants, in the bodies and frass of Spodoptera litura larvae following feeding.

To understand how a major cosmopolitan pest responds to two very different insecticidal proteins and to determine whether herbivorous insects and their frass could be environmental sources of recombinant proteins from transgenic plants, Spodoptera litura (Fab.) (Lepidoptera, Noctuidae) larvae were fed on tobacco leaves expressing either the biotin-binding protein, avidin, or the protease inhibitor, aprotinin. Control larvae received non-transgenic tobacco. Samples of larvae were taken after 5, 6 or 7 days' feeding and frass was collected after two 24-h periods at 6 and 7 days. Insects in all treatments grew significantly during the experiment, but the avidin-fed larvae were significantly smaller than the others on Day 7. Avidin was found in all samples of avidin-fed larvae (7.0+/-0.86 ng mg(-1), n=45), at a lower level than in their frass (31.9+/-5.08 ng mg(-1), n=30), and these frass levels were lower than those of the the leaves fed to the larvae (69.0+/-6.71 ng mg(-1), n=45). All of the avidin detected in these samples was capable of binding biotin. On average, between 10 and 28% of avidin was recovered with the methods used, whereas almost full recovery of aprotinin was effected. Aprotinin levels in larvae (8.2+/-0.53 ng mg(-1), n=45) were also lower than aprotinin levels in frass (77.4+/-6.9 ng mg(-1), n=30), which were somewhat lower than those in the leaves fed to the larvae (88.6+/-2.51 ng mg(-1), n=45). Approximately half the trypsin-binding ability of aprotinin was lost in larvae, and in frass, aprotinin had lost about 90% of its ability to bind trypsin.

The expression of a mammalian proteinase inhibitor, bovine spleen trypsin inhibitor in tobacco and its effects on Helicoverpa armigera larvae.

The cDNA for bovine spleen trypsin inhibitor (SI), a homologue of bovine pancreatic trypsin inhibitor (BPTI), including the natural mammalian presequence was expressed in tobacco using Agrobacterium tumefaciens-mediated transformation. Stable expression required the N-terminal targeting signal presequence although subcellular localization was not proven. SI was found to exist as two forms, one coinciding with authentic BPTI on western blots and the second marginally larger due to retention of the C-terminal peptide. Both were retained on a trypsin-agarose affinity gel and had inhibitory activity. Newly emergent leaves contained predominantly the large form whereas senescent leaves had little except the fully processed form present. Intermediate-aged leaves showed a gradual change indicating that a slow processing of the inhibitor peptide was occurring. The stability of SI was shown by the presence of protein at high levels in completely senescent leaves. Modifications to the cDNA (3' and 5' changes and minor codon changes) resulted in a 20-fold variation in expression. Expression of modified SI in transgenic tobacco leaves at 0.5% total soluble protein reduced both survival and growth of Helicoverpa armigera larvae feeding on leaves from the late first instar. In larvae surviving for 8 days, midgut trypsin activity was reduced in SI-tobacco fed larvae, while chymotrypsin activity was increased. Activities of leucine aminopeptidase and elastase-like chymotrypsin remained unaltered. The use of SI as an insect resistance factor is discussed.

Avidin expressed in transgenic tobacco leaves confers resistance to two noctuid pests, Helicoverpa armigera and Spodoptera litura.

Fertile transgenic tobacco plants with leaves expressing avidin in the vacuole have been produced and shown to halt growth and cause mortality in larvae of two noctuid lepidopterans, Helicoverpa armigera and Spodoptera litura. Late first instar H. armigera larvae and neonate (< 12-h-old) S. litura larvae placed on leaves excised from T0 tobacco expressing avidin at 3.1-4.6 microM (micromoles/kg of fresh leaf tissue) had very poor growth over their first 8 days on the leaves, significant numbers had died by days 11 or 12 and all were dead by day 22 (H. armigera) or day 25 (S. litura). Similar results were obtained when late first instar H. armigera larvae were placed on leaves from T1 plants expressing avidin at six different average concentrations, ranging from 3.7 to 17.3 microM. Two larvae on the lowest expressing leaves survived to pupation, but there was total mortality among the other groups and no relationship between avidin concentration and the effects on the larvae. Synergistic effects between avidin-expressing tobacco plants and a purified Bt toxin, Cry1Ba, were demonstrated. Late instar H. armigera larvae fed with leaves from T2 plants expressing avidin at average concentrations of either <5.3 or > 12.9 microM, and painted with Cry1Ba protein at a rate equivalent to an expression level of 0.5% of total leaf protein, died significantly faster than larvae given either of the two treatments alone. Larvae fed with avidin-expressing leaves painted with the protease inhibitor, aprotinin, at a rate equivalent to 1% of total leaf protein had mortality similar to those given avidin-leaves alone. There was no evidence of antagonism between these two proteins.