ABSTRACT
The removal of pollutants from water bodies is crucial for the well-being of humanity and is a topic of global research. Researchers have turned their attention to green synthesized nanoparticles for wastewater treatment due to their eco-friendly nature, biocompatibility, and cost-effectiveness. This work demonstrates the efficient removal of organic dye and both gram-positive and gram-negative bacteria from water bodies using copper-doped cerium oxide nanoparticles synthesized withMurraya Koenigiiextract. Characterized via various methods, the 15% copper doped cerium oxide nanoparticles (Cu 15% NPs) exhibited maximum Congo red dye adsorption (98% degradation in 35 min). Kinetic analysis favoured a pseudo-second-order model, indicating the chemical nature of adsorption. Equilibrium adsorption isotherms aligned with the Langmuir model, indicating homogenous monolayer dye adsorption on the doped adsorbent. The maximum uptake of adsorbate,Qmobtained from Langmuir model for Cu 15% NPs was 193 mg g-1. The study also showed enhanced antibacterial activity againstBacillus subtilis, Staphylococcus aureus, Escherichia coliandPseudomonas aeruginosafor Cu-doped ceria, attributed to generation of reactive oxygen species (ROS) induced by the redox cycling between Ce3+and Ce4+. This substantiated that the green synthesized copper doped cerium oxide nanoparticles are potential candidates for adsorptive removal of Congo red dye and as antibacterial agents.
Subject(s)
Cerium , Metal Nanoparticles , Water Pollutants, Chemical , Congo Red , Copper/chemistry , Adsorption , Kinetics , Anti-Bacterial Agents/pharmacology , Anti-Bacterial Agents/chemistry , Gram-Negative Bacteria , Gram-Positive Bacteria , Metal Nanoparticles/chemistry , Water/chemistry , Hydrogen-Ion ConcentrationABSTRACT
Modified hybrid structures of TiO2 nanotubes (TONT), p-Al doped TONT/n-TONT with an additional overlayer of alumina, are constructed to achieve 99.57% photodegradation of the stable organic pollutant methylene blue (MB) within 180 min, a degradation rate 17 times higher than pure TONTs. The anodization at three different temperatures 2, 28 and 40 °C followed by impregnation of Al is used for their preparation. The analyses of structure, chemical composition and morphology are completed using x-ray diffraction, x-ray photoelectron spectroscopy (XPS) and high resolution transmission microscopy, respectively, Rutherford back scattering and field emission scanning electron microscopy confirm the formation of the hybrid structure. This structure exhibits the highest photodegradation rate with TONT based catalysts to date for MB blue, by enhancing the electron-hole separation, the absorption of visible photons and the adsorption sites for the pollutant. The optical data coupled with valence band XPS is used for elucidating the energy band structure of the p-n junctions and to gain insight into the effect of the junction mechanism on photoactivity. The rectification ratios of the impregnated p-n junctions, determined by current-voltage measurements, are found to vary from 102 to 106.
ABSTRACT
ABSTRACT: The paper reports the fabrication of Zn-doped TiO2 nanotubes (Zn-TONT)/ZnO nanoflakes heterostructure for the first time, which shows improved performance as a photoanode in dye-sensitized solar cell (DSSC). The layered structure of this novel nanoporous structure has been analyzed unambiguously by Rutherford backscattering spectroscopy, scanning electron microscopy, and X-ray diffractometer. The cell using the heterostructure as photoanode manifests an enhancement of about an order in the magnitude of the short circuit current and a seven-fold increase in efficiency, over pure TiO2 photoanodes. Characterizations further reveal that the Zn-TONT is preferentially oriented in [001] direction and there is a Ti metal-depleted interface layer which leads to better band alignment in DSSC.
ABSTRACT
Single crystal like TiO(2) nanotubes with preferential orientation along the [001] direction, parallel to the growth direction of nanotubes, that offer ease of charge transport much higher than reported so far, are fabricated using a cost effective two step technique. The success of this method to grow the nanotubes with the anomalous intense [001] preferential orientation is attributed to the zinc assisted minimization of the (001) surface energy. The single crystal like TiO(2) nanotubes show superior performance as supercapacitor electrodes compared to the normal polycrystalline titanium dioxide nanotubes.
