ABSTRACT
In this report, we introduce a novel idea to prepare a redox additive in a gel polymer electrolyte system of PVA-ZnSO4-H2SO4 based on zinc-carbon battery recycling. Here, zinc cans from spent zinc-carbon batteries are dissolved completely in 1 M H2SO4 to obtain a redox additive in an aqueous electrolyte of ZnSO4-H2SO4. Moreover, carbon nanoparticles and graphene nanosheets were synthesized from carbon rod and carbon powder from spent zinc-carbon batteries by only one step of washing and electrochemical exfoliation, respectively, which have good electrochemical capability. The three-electrode system using a ZnSO4-H2SO4 electrolyte with carbon nanoparticles and graphene nanosheets as working electrodes shows high electrochemical adaptability, which points out its promising application in supercapacitor devices. Thus, the symmetrical solid-state supercapacitor devices based on the sandwich structure of graphene nanosheets/PVA-ZnSO4-H2SO4/graphene nanosheets illustrated the highest energy density of 39.17 W h kg-1 at a power density of 1700 W kg-1. While symmetrical devices based on carbon nanoparticles/PVA-ZnSO4-H2SO4/carbon nanoparticles exhibited a maximum energy density of 35.65 W h kg-1 at a power density of 1700 W kg-1. Moreover, these devices illustrate strong durability after 5000 cycles, with approximately 90.2% and 73.1% remaining, respectively. These results provide a promising strategy for almost completely recycling zinc-carbon batteries, one of the most popular dry batteries.
ABSTRACT
In this paper, carbon materials, including graphene nanosheets and carbon nanoparticles, were prepared from spent zinc-carbon batteries by the following two simple methods: electrochemical exfoliation and ultrasonication. Here, graphene nanosheets were synthesized by electrochemical exfoliation in 0.5 M H2SO4 by using a direct current power supply with two carbon rods from spent zinc-carbon batteries. Carbon nanoparticles were prepared by fast ultrasonication in a low-cost, green solution of DI water and ethanol. Graphene nanosheets in this study have high quality, large scale, and good electrochemical ability, while carbon nanoparticles have a unique nanosize and a good specific surface area. These carbon materials were applied for electrochemical measurements for supercapacitor studies and showed excellent stability at different temperatures. Moreover, electric double-layer capacitor devices based on graphene nanosheets and carbon nanoparticles were also used in electrochemical studies with strong stability and good electrochemical capability.
ABSTRACT
All-solid-state lithium batteries (ASSLBs) using solid polymer electrolytes (SPEs) are believed to be future next-generation batteries aiming to replace high-risk traditional batteries using liquid electrolytes, which have a wide application range in portable electronic devices, portable power supplies, and especially in electric vehicles. Moreover, the appearance of SPEs can overcome the electrolyte leakage and flammability problems in conventional lithium-ion batteries. Nevertheless, ASSLBs still face some limitations due to the low ionic conductivity of solid-state electrolytes (SSEs) at room temperature and the poor contact electrode/electrolyte interface, which can be solved by suitable strategies. Currently, the research strategies of metal-organic frameworks that can be incorporated into solid polymer electrolytes offer a remarkable method for producing uniform solid polymer electrolytes that have good electrode/electrolyte contact interfaces and high ionic conductivity. Herein, the updates of current studies about metal-organic framework-incorporated composite solid polymer electrolytes are discussed in this mini-review.
ABSTRACT
Herein, for the first time, we present two-dimensional (2D) NH4V3O8 nanoflakes as an excellent material for both energy conversion of the hydrogen evolution reaction and storage of supercapacitors by a simple and fast two-step synthesis, which exhibit a completely sheet-like morphology, high crystallinity, good specific surface area, and also stability, as determined by thermogravimetric analysis. The 2D-NH4V3O8 flakes show an acceptable hydrogen evolution performance in 0.5 M H2SO4 on a glassy carbon electrode (GCE) coated with 2D-NH4V3O8, which results in a low overpotential of 314 mV at -10 mA cm-2 with an excellent Tafel slope as low as 90 mV dec-1. So far, with the main focus on energy storage, 2D-NH4V3O8 nanoflakes were found to be ideal for supercapacitor electrodes. The NH4V3O8 working electrode in 1 M Na2SO4 shows an excellent electrochemical capability of 274 F g-1 at 0.5 A g-1 for a maximum energy density of 38 W h kg-1 at a power density as high as 250 W kg-1. Moreover, the crystal structure of 2D-NH4V3O8 is demonstrated by density functional theory (DFT) computational simulation using three functionals, GGA, GGA + U, and HSE06. The simple preparation, low cost, and abundance of the NH4V3O8 material provide a promising candidate for not only energy conversion but also energy-storage applications.
ABSTRACT
The aim of this study is to prepare a two-dimensional (2D) WO3·H2O nanostructure assembly into a flower shape with good chemical stability for electrochemical studies of catalyst and energy storage applications. The 2D-WO3·H2O nanoflowers structure is created by a fast and simple process at room condition. This cost-effective and scalable technique to obtain 2D-WO3·H2O nanoflowers illustrates two attractive applications of electrochemical capacitor with an excellent energy density value of 25.33 W h kg-1 for high power density value of 1600 W kg-1 and good hydrogen evolution reaction results (low overpotential of 290 mV at a current density of 10 mA cm-2 with a low Tafel slope of 131 mV dec-1). A hydrogen evolution reaction (HER) study of WO3 in acidic media of 0.5 M H2SO4 and electrochemical capacitor (supercapacitors) in 1 M Na2SO4 aqueous electrolyte (three electrode system measurements) demonstrates highly desirable characteristics for practical applications. Our design for highly uniform 2D-WO3·H2O as catalyst material for HER and active material for electrochemical capacitor studies offers an excellent foundation for design and improvement of electrochemical catalyst based on 2D-transition metal oxide materials.
ABSTRACT
In this study, we provide a simple and green approach to recycle waste zinc carbon batteries for making carbon dots and porous carbon material. The carbon dots are easily synthesized by one green step, the hydrothermal treatment of a carbon rod in a mixture of DI water and pure ethanol to obtain a blue fluorescence under UV light, which can be used directly as a fluorescence ink. The as-prepared carbon dot process give typical dots with a uniform diameter from 3 to 8 nm with a strong slight blue fluorescent. The porous carbon material is also recycled from carbon powder in a waste battery via one green step annealing process without any chemical activation and with a hierarchically porous structure. This porous carbon material is demonstrated as an electrode for symmetrical solid state supercapacitors (SSCs) in a sandwich structure: porous carbon/PVA-KOH/porous carbon. The SSCs using recycled porous carbon electrodes exhibit a good energy density of 4.58 W h kg-1 at a power density of 375 W kg-1 and 97.6% retention after 2000 cycles. The facile one green step of hydrothermal and also that of calcination provide a promising strategy to recycle waste zinc carbon batteries, which transfers the excellent applications.
