Fabrication of polypyrrole nanowire arrays-modified electrode for point-of-use water disinfection via low-voltage electroporation.

Still ∼10% of world's population has no sustainable access to centralized water supply system, causing millions of deaths annually by waterborne diseases. Here, we develop polypyrrole nanowire arrays (PPyNWs)-modified electrodes by polymerization of pyrrole on graphite felt for point-of-use water disinfection via low-voltage electroporation. A flow-through mode is specially applied to alleviate diffusion barrier of pyrrole in the porous graphite felt for uniform PPyNWs growth. The flow-through disinfection device using the optimized PPyNWs electrode achieves above 4-log removal for model virus (MS2) and gram-positive/negative bacteria (E. faecalis and E. coli) at applied voltage of 1.0 V and fluxes below 1000 and 2500 L/m2/h. Electroporation is recognized as the dominant disinfection mechanism by using square-wave alternating voltage of ±1.0 V to eliminate the electrochemical reactions. In-situ sampling experiments reveal that anode acts as the main disinfection function due to its electric field attraction with negatively charged E. coli cells. The live/dead baclight staining experiments indicate an adsorption-desorption process of E. coli cells on anode, and the adsorption-desorption balance determines the disinfection abilities of PPyNWs anode. Under 1.0 V and 2000 L/m2/h, the disinfection device enables above 4-log E. coli removal in tap water within 7-day operation with energy consumption below 20 mJ/L, suggesting its sound application potential for point-of-use water disinfection.

Performance and microbial diversity of denitrifying biofilms on polyurethane foam coupled with various solid carbon sources for nitrate-rich water purification.

This study investigated the performance and microbial communities of denitrifying biofilms on polyurethane foam coupled with various solid carbon sources of acid- and alkali-pretreated rice straw and rice husk. Results showed that acid and alkali-pretreated rice straw both had higher TOC release rates (0.041-0.685 mg g-1 day-1) than those of rice husk (0.019-0.160 mg g-1 day-1) over a month, while acid pretreatment of rice husk and rice straw had a much higher organics release rate than that of alkali pretreatment and non-pretreatment, respectively. Acid-pretreated rice straw achieved the most efficient TN removal performance (82.06 ± 3.65%) with the lower occurrences of NH4+-N during denitrification than that of alkali-pretreated rice straw (80.05 ± 4.12%) over more than a month operation. However, alkali pretreatment of rice husk demonstrated much more significantly efficient TN removal efficiency (80.39 ± 2.1%) than did acid pretreatment (69.59 ± 13.43%). MiSeq sequencing analysis showed that the four biofilm samples attached on polyurethane foam with the addition of pretreated rice straw or rice husk had a range of 13-15 differentially abundant phylum and 81-123 differentially abundant genera in comparison with biofilm without extra solid carbon sources, and a higher TN removal efficiency demonstrated more types of differentially abundant genera.