Nitrilotriacetic Acid Functionalized Microgels for Efficient Immobilization of Hyaluronan Synthase.

Enzymes play a vital role in synthesizing complex biological molecules like hyaluronic acid (HA). Immobilizing enzymes on support materials is essential for their efficient use and reuse in multiple cycles. Microgels, composed of cross-linked, highly swollen polymer networks, are ideal for enzyme uptake owing to their high porosity. This study demonstrates the immobilization of His6-tagged hyaluronan synthase from Pasteurella multocida (PmHAS) onto nitrilotriacetic acid functionalized microgels using different bivalent ions (Ni2+, Co2+, Mn2+, Mg2+, and Fe2+) via metal affinity binding. The results indicate that using Ni2+ yields the microgels with the highest enzyme uptake and HA formation. The immobilized PmHAS enables repetitive enzymatic production, producing high molecular weight HAs with decreasing dispersities in each step. Furthermore, the highest reported yield of HA with high molecular weight for immobilized PmHAS is achieved. This system establishes a foundation for continuous HA formation, with future works potentially enhancing PmHAS stability through protein engineering.

Microgels with controlled network topologies by photocrosslinking-assisted continuous precipitation polymerization.

In this study, we present a new synthesis methodology based on photo-crosslinking-assisted continuous precipitation polymerization which allows controlling the distribution of crosslinks in microgels. In our approach we substituted conventional crosslinking agent by a comonomer carrying photo-crosslinkable 4-oxocyclopent-2-en-1-yl group. Microgel size, morphology, distribution of crosslinks and packing density of the polymer chains are studied as a function of retention time (Rt) in the flow reactor. Dynamic and static light scattering (DLS and SLS) as well as small angle X-ray scattering (SAXS) proved an excellent level of control over the distribution of crosslinks in microgels during the polymerization process. These results were confirmed by atomic force microscopy (AFM), indicating a difference in microgel stiffness and arrangement of the polymer network as resulting from increased Rt.

Impact of Fibrin Gel Architecture on Hepatocyte Growth Factor Release and Its Role in Modulating Cell Behavior for Tissue Regeneration.

A novel scaffold design has been created to enhance tissue engineering and regenerative medicine by optimizing the controlled, prolonged release of Hepatocyte Growth Factor (HGF), a powerful chemoattractant for endogenous mesenchymal stem cells. We present a new stacked scaffold that is made up of three different fibrin gel layers, each of which has HGF integrated into the matrix. The design attempts to preserve HGF's regenerative properties for long periods of time, which is necessary for complex tissue regeneration. These multi-layered fibrin gels have been mechanically evaluated using rheometry, and their degradation behavior has been studied using D-Dimer ELISA. Understanding the kinetics of HGF release from this novel scaffold configuration is essential for understanding HGF's long-term sustained bioactivity. A range of cell-based tests were carried out to verify the functionality of HGF following extended incorporation. These tests included 2-photon microscopy using phalloidin staining to examine cellular morphology, SEM analysis for scaffold-cell interactions, and scratch and scatter assays to assess migration and motility. The analyses show that the novel stacking scaffold promotes vital cellular processes for tissue regeneration in addition to supporting HGF's bioactivity. This scaffold design was developed for in situ tissue engineering. Using the body as a bioreactor, the scaffold should recruit mesenchymal stem cells from their niche, thus combining the regenerative abilities of HGF and MSCs to promote tissue remodeling and wound repair.

Fibrin Hydrogels Reinforced by Reactive Microgels for Stimulus-Triggered Drug Administration.

Tissue engineering is a steadily growing field of research due to its wide-ranging applicability in the field of regenerative medicine. Application-dependent mechanical properties of a scaffold material as well as its biocompatibility and tailored functionality represent particular challenges. Here the properties of fibrin-based hydrogels reinforced by functional cytocompatible poly(N-vinylcaprolactam)-based (PVCL) microgels are studied and evaluated. The employment of temperature-responsive microgels decorated by epoxy groups for covalent binding to the fibrin is studied as a function of cross-linking degree within the microgels, microgel concentration, as well as temperature. Rheology reveals a strong correlation between the mechanical properties of the reinforced fibrin-based hydrogels and the microgel rigidity and concentration. The incorporated microgels serve as cross-links, which enable temperature-responsive behavior of the hydrogels, and slow down the hydrogel degradation. Microgels can be additionally used as carriers for active drugs, as demonstrated for dexamethasone. The microgels' temperature-responsiveness allows for triggered release of payload, which is monitored using a bioassay. The cytocompatibility of the microgel-reinforced fibrin-based hydrogels is demonstrated by LIVE/DEAD staining experiments using human mesenchymal stem cells. The microgel-reinforced hydrogels are a promising material for tissue engineering, owing to their superior mechanical performance and stability, possibility of drug release, and retained biocompatibility.

Microgels with Immobilized Glycosyltransferases for Enzymatic Glycan Synthesis.

Glycans, composed of linked monosaccharides, play crucial roles in biology and find diverse applications. Enhancing their enzymatic synthesis can be achieved by immobilizing enzymes on materials such as microgels. Here, we present microgels with immobilized glycosyltransferases, synthesized through droplet microfluidics, immobilizing enzymes either via encapsulation or postattachment. SpyTag-SpyCatcher interaction was used for enzyme binding, among others. Fluorescamine and permeability assays confirmed enzyme immobilization and microgel porosity, while enzymatic activities were determined using HPLC. The potential application of microgels in cascade reactions involving multiple enzymes was demonstrated by combining ß4GalT and α3GalT in an enzymatic reaction with high yields. Moreover, a cascade of ß4GalT and ß3GlcNAcT was successfully implemented. These results pave the way toward a modular membrane bioreactor for automated glycan synthesis containing the presented biocatalytic microgels.

Adhesion Peptide-Functionalized Biobased Microgels for Controlled Delivery of Pesticides.

Widespread use of plant protection agents in agriculture is a major cause of pollution. Apart from active ingredients, the environmental impact of auxiliary synthetic polymers should be minimized if they are highly persistent. An alternative to synthetic polymers is the use of natural polysaccharides, which are abundant and biodegradable. In this study, we explore pectin microgels functionalized with anchor peptides (P-MAPs) to be used as an alternative biobased pesticide delivery system. Using copper as the active ingredient, P-MAPs effectively prevented infection of grapevine plants with downy mildew under semi-field conditions on par with commercial copper pesticides. By using anchor peptides, the microgels tightly bind to the leaf surface, exhibiting excellent rain fastness and prolonged fungicidal activity. Finally, P-MAPs are shown to be easily degradable by enzymes found in nature, demonstrating their negligible long-term impact on the environment.

Fibrin-Based Hydrogels with Reactive Amphiphilic Copolymers for Mechanical Adjustments Allow for Capillary Formation in 2D and 3D Environments.

This study focuses on enhancing controllable fibrin-based hydrogels for tissue engineering, addressing existing weaknesses. By integrating a novel copolymer, we improved the foundation for cell-based angiogenesis with adaptable structural features. Tissue engineering often faces challenges like waste disposal and nutrient supply beyond the 200 µm diffusion limit. Angiogenesis breaks through this limitation, allowing the construction of larger constructs. Our innovative scaffold combination significantly boosts angiogenesis, resulting in longer branches and more capillary network junctions. The copolymer attached to fibrin fibers enables precise adjustment of hydrogel mechanical dynamic properties for specific applications. Our material proves effective for angiogenesis, even under suppression factors like suramin. In our study, we prepared fibrin-based hydrogels with and without the copolymer PVP12400-co-GMA10mol%. Using a co-culture system of human umbilical vein endothelial cells (HUVEC) and mesenchymal stem cells (MSC), we analyzed angiogenetic behavior on and within the modified hydrogels. Capillary-like structures were reproducibly formed on different surfaces, demonstrating the general feasibility of three-dimensional endothelial cell networks in fibrin-based hydrogels. This highlights the biomaterial's suitability for in vitro pre-vascularization of biohybrid implants.

Enhancing Adhesion of Fibrin-Based Hydrogel to Polythioether Polymer Surfaces.

The development of stable (bio)hybrid constructs composed of scaffolds and (bio)matrices is a major challenge in the field of tissue engineering. In the present work, the adhesion of fibrin-based hydrogels to the surface of polythioether-based polymers relevant to the 3D printing of polymer scaffolds produced by thiol-ene click chemistry was investigated. Adhesion properties were characterized by single-lap tensile shear testing. Both the sample preparation and the test method were optimized for the analysis of fibrin gel bonding to the polythioether surface. Our experimental results show that even without further modification, an adhesion between the fibrin hydrogel and polythioether is substantial, with an adhesion strength of 4.9 ± 1.0 kPa. To further improve the bonding, linear functional poly(N-vinylpyrrolidone-co-glycidyl methacrylate) (PVP-co-GMA) copolymers were used that are known for covalently binding to fibrin. The maximum adhesion strength in our study was found to be 18.4 ± 3.4 kPa. The pure PVP-co-GMA copolymers also demonstrate covalent binding to the thiol-ene-based polymers with a maximum adhesion strength of 32.2 ± 2.7 kPa. Therefore, compared to pure fibrin, the presence of copolymer coating both on the polythioether surface and in the fibrin gel led to a significant increase of the adhesion strength by a factor of 1.6.

Multiresponsive Core-Shell Microgels Functionalized by Nitrilotriacetic Acid.

Stimuli-responsive microgels with ionizable functional groups offer versatile applications, e.g., by the uptake of oppositely charged metal ions or guest molecules such as drugs, dyes, or proteins. Furthermore, the incorporation of carboxylic groups enhances mucoadhesive properties, crucial for various drug delivery applications. In this work, we successfully synthesized poly{N-vinylcaprolactam-2,2'-[(5-acrylamido-1-carboxypentyl)azanediyl]diacetic acid} [p(VCL/NTAaa)] microgels containing varying amounts of nitrilotriacetic acid (NTA) using precipitation polymerization. We performed fundamental characterization by infrared (IR) spectroscopy and dynamic and electrophoretic light scattering. Despite their potential multiresponsiveness, prior studies on NTA-functionalized microgels lack in-depth analysis of their stimuli-responsive behavior. This work addresses this gap by assessing the microgel responsiveness to temperature, ionic strength, and pH. Morphological investigations were performed via NMR relaxometry, nanoscale imaging (AFM and SEM), and reaction calorimetry. Finally, we explored the potential application of the microgels by conducting cytocompatibility experiments and demonstrating the immobilization of the model protein cytochrome c in the microgels.

On-Chip Fabrication of Colloidal Suprastructures by Assembly and Supramolecular Interlinking of Microgels.

In this report, a versatile method is demonstrated to create colloidal suprastructures by assembly and supramolecular interlinking of microgels using droplet-based microfluidics. The behavior of the microgels is systematically investigated to evaluate the influence of their concentration on their distribution between the continuous, the droplet phase, and the interface. At low concentrations, microgels are mainly localized at the water-oil interface whereas an excess of microgels results, following the complete coverage of the water-oil interface, in their distribution in the continuous phase. To stabilize the colloidal suprastructure, on-chip gelation is introduced by adding natural polyphenol tannic acid (TA) in the water phase. TA forms interparticle linking between the poly(N-vinylcaprolactam) (PVCL) microgels by supramolecular interactions. The combination of supramolecular interlinking with the variation of the microgel concentration in microfluidic droplets enables on-chip fabrication of defined colloidal suprastructures with morphologies ranging from colloidosomes to colloidal supraballs. The obtained supracolloidal structures exhibit a pH-responsive behavior with a disintegration at alkaline conditions within a scale of seconds. The destabilization process results from the deprotonation of phenolic groups and destruction of hydrogen bonds with PVCL chains at higher pH.

Renewable and Functional Latexes Synthesized by Polymerization-Induced Self-Assembly for UV-Curable Films.

After the development of polymer coatings and films based on renewable resources, there remains a challenge of combining the advantages of water-borne acrylic latexes with the excellent physical properties of cross-linked solvent-borne coatings. After polymerization, the renewable 4-oxocyclopentenyl acrylate (4CPA) is capable of undergoing photocyclodimerization under UV light, yielding a cross-linked polyacrylate. In this work, we investigate the polymerization-induced self-assembly (PISA) of 4CPA with several renewable acrylic monomers in the presence of a macro-RAFT agent. The produced latexes have a small particle size, good colloidal stability, and are free of volatile organic compounds. After film formation and UV curing, flexible to rigid films can be obtained depending on the monomer composition and UV irradiation time. The cross-linked films show promise as oil and water barriers in paper coating applications. This work outlines the development and application of renewable and functional cross-linkable latexes synthesized by PISA.

Cellular Architects at Work: Cells Building their Own Microgel Houses.

Microporous annealed particle (MAP) scaffolds are investigated for their application as injectable 3D constructs in the field of regenerative medicine and tissue repair. While available MAP scaffolds provide a stable interlinked matrix of microgels for cell culture, the infiltration depth and space for cells to grow inside the scaffolds is pre-determined by the void fraction during the assembly. In the case of MAP scaffolds fabricated from interlinked spherical microgels, a cellularity gradient can be observed with the highest cell density on the scaffold surface. Additionally, the interlinked microgel network limits the ability of cells to remodel their environment, which contradicts native tissue dynamics. In this work, a cell-induced interlinking method for MAP scaffold formation is established, which avoids the necessity of chemical crosslinkers and pre-engineered pores to achieve micro- or macropores in these 3D frameworks. This method enables cells to self-organize with microgels into dynamic tissue constructs, which can be further controlled by altering the microgel properties, the cell/microgel ratio, and well shape. To form a cell-induced interlinked scaffold, the cells are mixed with dextran-based microgels and function as a glue between the microgels, resulting in a more homogenous cell distribution throughout the scaffold with efficient cell-cell interactions.

Fibrin-Dextran Hydrogels with Tunable Porosity and Mechanical Properties.

Hydrogels as scaffolds in tissue engineering have gained increasing attention in recent years. Natural hydrogels, e.g., collagen or fibrin, are limited by their weak mechanical properties and fast degradation, whereas synthetic hydrogels face issues with biocompatibility and biodegradation. Therefore, combining natural and synthetic polymers to design hydrogels with tunable mechanical stability and cell affinity for biomedical applications is of interest. By using fibrin with its excellent cell compatibility and dextran with controllable mechanical properties, a novel bio-based hydrogel can be formed. Here, we synthesized fibrin and dextran-methacrylate (MA)-based hydrogels with tailorable mechanical properties, controllable degradation, variable pore sizes, and ability to support cell proliferation. The hydrogels are formed through in situ gelation of fibrinogen and dextran-MA with thrombin and dithiothreitol. Swelling and nuclear magnetic resonance diffusometry measurements showed that the water uptake and mesh sizes of fabricated hydrogels decrease with increasing dextran-MA concentrations. Cell viability tests confirm that these hydrogels exhibit no cytotoxic effect.

Tuning the Porosity of Dextran Microgels with Supramacromolecular Nanogels as Soft Sacrificial Templates.

Hydrogels, as well as colloidal hydrogels (microgels), are important materials for a large variety of applications in the biomedical field. Microgels with a controlled pore size (meso- and macropores) are required for efficient nutrient support, modulation of cell adhesion, removal of metabolic products in cell cultures, and probiotic loading. Common microgel fabrication techniques do not provide sufficient control over pore sizes and geometry. In this work, the natural polysaccharide dextran modified with methacrylate groups is used to synthesize highly monodisperse meso- and macroporous microgels in a size range of 100-150 µm via photo cross-linking in microfluidic droplets. The size of mesopores is varied by the concentration of dextran methacrylate chains in the droplets (50-200 g L-1 ) and the size of macropores is regulated by the integration of pH-degradable supramacromolecular nanogels with diameters of 300 and 700 nm as sacrificial templates. Using permeability assays combined with confocal laser scanning microscopy, it is demonstrated that functional dextran-based microgels with uniform and defined pores could be obtained.

Strategies for Automated Enzymatic Glycan Synthesis (AEGS).

Glycans are the most abundant biopolymers on earth and are constituents of glycoproteins, glycolipids, and proteoglycans with multiple biological functions. The availability of different complex glycan structures is of major interest in biotechnology and basic research of biological systems. High complexity, establishment of general and ubiquitous synthesis techniques, as well as sophisticated analytics, are major challenges in the development of glycan synthesis strategies. Enzymatic glycan synthesis with Leloir-glycosyltransferases is an attractive alternative to chemical synthesis as it can achieve quantitative regio- and stereoselective glycosylation in a single step. Various strategies for synthesis of a wide variety of different glycan structures has already be established and will exemplarily be discussed in the scope of this review. However, the application of enzymatic glycan synthesis in an automated system has high demands on the equipment, techniques, and methods. Different automation approaches have already been shown. However, while these techniques have been applied for several glycans, only a few strategies are able to conserve the full potential of enzymatic glycan synthesis during the process - economical and enzyme technological recycling of enzymes is still rare. In this review, we show the major challenges towards Automated Enzymatic Glycan Synthesis (AEGS). First, we discuss examples for immobilization of glycans or glycosyltransferases as an important prerequisite for the embedment and implementation in an enzyme reactor. Next, improvement of bioreactors towards automation will be described. Finally, analysis and monitoring of the synthesis process are discussed. Furthermore, automation processes and cycle design are highlighted. Accordingly, the transition of recent approaches towards a universal automated glycan synthesis platform will be projected. To this end, this review aims to describe essential key features for AEGS, evaluate the current state-of-the-art and give thought- encouraging impulses towards future full automated enzymatic glycan synthesis.

Function Follows Form: Oriented Substrate Nanotopography Overrides Neurite-Repulsive Schwann Cell-Astrocyte Barrier Formation in an In Vitro Model of Glial Scarring.

Schwann cell (SC) transplantation represents a promising therapeutic approach for traumatic spinal cord injury but is frustrated by barrier formation, preventing cell migration, and axonal regeneration at the interface between grafted SCs and reactive resident astrocytes (ACs). Although regenerating axons successfully extend into SC grafts, only a few cross the SC-AC interface to re-enter lesioned neuropil. To date, research has focused on identifying and modifying the molecular mechanisms underlying such scarring cell-cell interactions, while the influence of substrate topography remains largely unexplored. Using a recently modified cell confrontation assay to model SC-AC barrier formation in vitro, highly oriented poly(ε-caprolactone) nanofibers were observed to reduce AC reactivity, induce extensive oriented intermingling between SCs and ACs, and ultimately enable substantial neurite outgrowth from the SC compartment into the AC territory. It is anticipated that these findings will have important implications for the future design of biomaterial-based scaffolds for nervous tissue repair.

Compartmentalized Polyampholyte Microgels by Depletion Flocculation and Coacervation of Nanogels in Emulsion Droplets.

In pH-responsive drug carriers, the distribution of charges has been proven to affect delivery efficiency but is difficult to control and verify. Herein, we fabricate polyampholyte nanogel-in-microgel colloids (NiM-C) and show that the arrangement of the nanogels (NG) can easily be manipulated by adapting synthesis conditions. Positively and negatively charged pH-responsive NG are synthesized by precipitation polymerization and labelled with different fluorescent dyes. The obtained NG are integrated into microgel (MG) networks by subsequent inverse emulsion polymerization in droplet-based microfluidics. By confocal laser scanning microscopy (CLSM), we verify that depending on NG concentration, pH value and ionic strength, NiM-C with different NG arrangements are obtained, including Janus-like phase-separation of NG, statistical distribution of NG, and core-shell arrangements. Our approach is a major step towards uptake and release of oppositely charged (drug) molecules.

Making microgels photo-responsive by complexation with a spiropyran surfactant.

We report on triggering of p(NIPAM-AA) microgels' photo-responsiveness by making complexes with a spiropyran (SP) containing surfactant. Being dissolved in water, the SP surfactant in its merocyanine state bears three charges, while irradiation with UV and vis light leads to the partial or complete reversal of the SP state. The complexation of the photo-responsive amphiphile with swollen anionic microgels results in charge compensation within the gel interior and as a consequence its size reduces and the volume phase transition temperature (VPTT) decreases down to 32 °C. Under irradiation the MC form photo-isomerizes to a ring closed SP state generating a more hydrophobic surfactant with one positive charge at the head. The increase in the hydrophobicity of the surfactant and thus of the interior of the gel results in the reversible size change of the microgel. We investigate the photo-responsivity of the microgel as a function of wavelength and irradiation intensity, as well as of surfactant concentration and charge density of the microgel. We show that the change in the size and VPTT of the microgels during irradiation occurs through a combination of two processes: heating of the solution during light absorption by the surfactant (more pronounced in the case of UV irradiation) and the change in the hydrophobicity of the surfactant.

Novel Pectin Binder for Satelliting Carbides to H13 Tool Steel for PBF-LB Processing.

In order to enhance the range of processable alloys of laser-based powder bed fusion, reinforced alloys have gained focus. Satelliting is a recently introduced method for adding fine additives to larger parent powder particles using a bonding agent. Satellited particles prevent a local demixing due to size and density effects of the powder. In this study, the satelliting method is used for the additivation of Cr3C2 to AISI H13 tool steel via a functional polymer binder (pectin). The investigation includes a detailed binder analysis and comparison to the previously used PVA binder as well as processability in PBF-LB and the microstructure of the alloy. The results reveal that pectin is a suitable binder for the satelliting process and the demixing behavior that appears when using a simple powder blend can be significantly reduced. However, the alloy is enriched with carbon, which results in austenite being retained. Thus, in future research, a reduced binder content will be investigated.