Generic sensor platform based on electro-responsive molecularly imprinted polymer nanoparticles (e-NanoMIPs).

The present research describes the design of robust electrochemical sensors based on electro-responsive molecularly imprinted polymer nanoparticles (e-MIPs). The e-MIPs, tagged with a redox probe, combine both recognition and reporting functions. This system replaces enzyme-mediator pairs used in traditional biosensors. The analyte recognition process relies on the generic actuation phenomenon when the polymer conformation of e-MIPs is changing in response to the presence of the template analyte. The analyte concentration is measured using voltammetric methods. In an exemplification of this technology, electrochemical sensors were developed for the determination of concentrations of trypsin, glucose, paracetamol, C4-homoserine lactone, and THC. The present technology allows for the possibility of producing generic, inexpensive, and robust disposable sensors for clinical, environmental, and forensic applications.

Application of molecularly imprinted polymer nanoparticles for degradation of the bacterial autoinducer N-hexanoyl homoserine lactone.

A novel bacterial quorum quenching system is presented. For the first time the degradation of N-l-hexanoyl homoserine lactone (C6-AHL), a Gram-negative quorum sensing autoinducer, has been enhanced using molecularly imprinted nanoparticles (MIP NPs) which were prepared using transition state analogue of the γ-lactone ring hydrolysis as template.

Optical fiber sensors for monitoring in critical care.

Monitoring of key physiological and pharmacological parameters is an important part of a closed loop control system in critical care. Optical fiber sensors provide a versatile platform technology that can be easily incorporated into existing in-dwelling catheters or face masks. With appropriate functional coatings they can be used to monitor a range of relevant parameters and two different examples are presented: (i) respiration monitoring; (ii) drug level monitoring. Respiration monitoring involves monitoring of temperature and humidity in inhaled and exhaled breath. The optical fiber sensor consists of a fiber Bragg grating to measure temperature and a tip coating whose refractive index changes with humidity. The sensor is demonstrated to be able to track breath to breath changes when incorporated into a mask. Drug level monitoring is demonstrated in vitro using a long period grating coated with molecularly imprinted polymer nanoparticles that are sensitive to fentanyl. The sensor has a limit of detection of 50ng/ml.

New potentiometric sensor based on molecularly imprinted nanoparticles for cocaine detection.

Here we present a potentiometric sensor for cocaine detection based on molecularly imprinted polymer nanoparticles (nanoMIPs) produced by the solid-phase imprinting method. The composition of polymers with high affinity for cocaine was optimised using molecular modelling. Four compositions were selected and polymers prepared using two protocols: chemical polymerisation in water and UV-initiated polymerisation in organic solvent. All synthesised nanoparticles had very good affinity to cocaine with dissociation constants between 0.6nM and 5.3nM. Imprinted polymers produced in organic solvent using acrylamide as a functional monomer demonstrated the highest yield and affinity, and so were selected for further sensor development. For this, nanoparticles were incorporated within a PVC matrix which was then used to prepare an ion-selective membrane integrated with a potentiometric transducer. It was demonstrated that the sensor was able to quantify cocaine in blood serum samples in the range of concentrations between 1nM and 1mM.

Development of molecularly imprinted polymers specific for blood antigens for application in antibody-free blood typing.

A novel approach in antibody-free blood typing based on molecularly imprinted polymeric nanoparticles is described.

Does size matter? Study of performance of pseudo-ELISAs based on molecularly imprinted polymer nanoparticles prepared for analytes of different sizes.

The aim of this work is to evaluate whether the size of the analyte used as template for the synthesis of molecularly imprinted polymer nanoparticles (nanoMIPs) can affect their performance in pseudo-enzyme linked immunosorbent assays (pseudo-ELISAs). Successful demonstration of a nanoMIPs-based pseudo-ELISA for vancomycin (1449.3 g mol(-1)) was demonstrated earlier. In the present investigation, the following analytes were selected: horseradish peroxidase (HRP, 44 kDa), cytochrome C (Cyt C, 12 kDa) biotin (244.31 g mol(-1)) and melamine (126.12 g mol(-1)). NanoMIPs with a similar composition for all analytes were synthesised by persulfate-initiated polymerisation in water. In addition, core-shell nanoMIPs coated with polyethylene glycol (PEG) and imprinted for melamine were produced in organics and tested. The polymerisation of the nanoparticles was done using a solid-phase approach with the correspondent template immobilised on glass beads. The performance of the nanoMIPs used as replacement for antibodies in direct pseudo-ELISA (for the enzymes) and competitive pseudo-ELISA for the smaller analytes was investigated. For the competitive mode we rely on competition for the binding to the nanoparticles between free analyte and corresponding analyte-HRP conjugate. The results revealed that the best performances were obtained for nanoMIPs synthesised in aqueous media for the larger analytes. In addition, this approach was successful for biotin but completely failed for the smallest template melamine. This problem was solved using nanoMIP prepared by UV polymerisation in an organic media with a PEG shell. This study demonstrates that the preparation of nanoMIP by solid-phase approach can produce material with high affinity and potential to replace antibodies in ELISA tests for both large and small analytes. This makes this technology versatile and applicable to practically any target analyte and diagnostic field.

Grafting of molecularly imprinted polymer to porous polyethylene filtration membranes by plasma polymerization.

An application of plasma-induced grafting of polyethylene membranes with a thin layer of molecularly imprinted polymer (MIP) was presented. High-density polyethylene (HDPE) membranes, "Vyon," were used as a substrate for plasma grafting modification. The herbicide atrazine, one of the most popular targets of the molecular imprinting, was chosen as a template. The parameters of the plasma treatment were optimized in order to achieve a good balance between polymerization and ablation processes. Modified HDPE membranes were characterized, and the presence of the grafted polymeric layer was confirmed based on the observed weight gain, pore size measurements, and infrared spectrometry. Since there was no significant change in the porosity of the modified membranes, it was assumed that only a thin layer of the polymer was introduced on the surface. The experiments on the re-binding of the template atrazine to the membranes modified with MIP and blank polymers were performed. HDPE membranes which were grafted with polymer using continuous plasma polymerization demonstrated the best result which was expressed in an imprinted factor equal to 3, suggesting that molecular imprinting was successfully achieved.

Colorimetric test-systems for creatinine detection based on composite molecularly imprinted polymer membranes.

An easy-to-use colorimetric test-system for the efficient detection of creatinine in aqueous samples was developed. The test-system is based on composite molecularly imprinted polymer (MIP) membranes with artificial receptor sites capable of creatinine recognition. A thin MIP layer was created on the surface of microfiltration polyvinylidene fluoride (PVDF) membranes using method of photo-initiated grafting polymerization. The MIP layer was obtained by co-polymerization of a functional monomer (e.g. 2-acrylamido-2-methyl-1-propanesulfonic acid, itaconic acid or methacrylic acid) with N, N'-methylenebisacrylamide as a cross-linker. The choice of the functional monomer was based on the results of computational modeling. The creatinine-selective composite MIP membranes were used for measuring creatinine in aqueous samples. Creatinine molecules were selectively adsorbed by the MIP membranes and quantified using color reaction with picrates. The intensity of MIP membranes staining was proportional to creatinine concentration in an analyzed sample. The colorimetric test-system based on the composite MIP membranes was characterized with 0.25 mM detection limit and 0.25-2.5mM linear dynamic range. Storage stability of the MIP membranes was estimated as at least 1 year at room temperature. As compared to the traditional methods of creatinine detection the developed test-system is characterized by simplicity of operation, small size and low cost.

Development of a sensor prepared by entrapment of MIP particles in electrosynthesised polymer films for electrochemical detection of ephedrine.

A voltammetric sensor for (-)-ephedrine has been prepared by a novel approach based on immobilisation of an imprinted polymer for ephedrine (MIPE) in an electrosynthesised polypyrrole (PPY) film. Composite films were grown potentiostatically at 1.0 V vs. Pt (QRE) on a glassy carbon electrode using an unconventional "upside-down" (UD) geometry for the three-electrode cell. As a consequence, a high MIP loading was obtained, as revealed by SEM. The sensor response was evaluated, after overoxidation of PPY matrix, by cyclic voltammetry after pre-concentration in a buffered solution of analyte in 0.5-3 mM concentration range. An ephedrine peak at approximately 0.9 V increasing with concentration and saturating at high concentrations was evident. PPY-modified electrode showed a response, which was distinctly lower than the MIP response for the same concentration of the template. The effect of potential interferences including compounds usually found in human fluids (ascorbic acid, uric acid, urea, glucose, sorbitol, glycine, dopamine) was examined.

Porous molecularly imprinted polymer membranes and polymeric particles.

Porous free-standing molecularly imprinted polymer membranes were synthesised by the method of in situ polymerisation using the principle of synthesis of interpenetrating polymer networks and tested in solid-phase extraction of triazine herbicides from aqueous solutions. Atrazine-specific MIP membranes were obtained by the UV-initiated co-polymerisation of methacrylic acid, tri(ethylene glycol) dimethacrylate, and oligourethane acrylate in the presence of a template (atrazine). Addition of oligourethane acrylate provided formation of the highly cross-linked MIP in a form of a free-standing 60 microm thick flexible membrane. High water fluxes through the MIP membranes were achieved due to addition of linear polymers (polyethylene glycol M(w) 20,000 and polyurethane M(w) 40,000) to the initial mixture of monomers before the polymerization. As a result, typical semi-interpenetrating polymer networks (semi-IPNs) have been formed, where the cross-linked polymer was represented by the atrazine-specific molecularly imprinted polymer, while the linear one was represented by polyethylene glycol/polyurethane. Extraction of the linear polymers from the fully formed semi-IPNs resulted in formation of large pores in the membrane structure. At the same time, extraction of the template molecules lead to formation of the sites in the polymeric network, which in shape and arrangement of functional groups are complementary to atrazine. Reference polymeric membranes were prepared from the same mixture of monomers but in the absence of the template. Recognition properties of the MIP membranes were estimated in solid-phase extraction by their ability to selective re-adsorbtion of atrazine from 10(-8) to 10(-4) M aqueous solutions. The imprinting effect was demonstrated for both types of the MIP membranes and the influence of the type of the linear compound on their recognition properties was estimated. The recognition properties of the MIP membranes were compared to those of the MIP particles of the same composition. Morphology of the MIP membranes was investigated using the SEM microscopy. High fluxes of the developed membranes together with high affinity and adsorption capability make them an attractive alternative to MIP particles in separation processes.

Molecularly imprinted polymers--tyrosinase mimics.

Synthetic polymers mimicking the enzyme tyrosinase have been prepared by the molecular imprinting of a complex between Cu (II) and catechol and ethyl ester of urocanic acid in an ethylene glycol dimethacrylate copolymer. Optimised polymer systems demonstrated catalysis, Michaelis-Menten kinetics and competitive inhibition similar to those of mushroom tyrosinase. The polymers benefited from superior chemical and mechanical stability in comparison with natural enzyme.

Surface-grafted molecularly imprinted polymers for protein recognition.

A technique for coating microplate wells with molecularly imprinted polymers (MIPs) specific for proteins is presented. 3-Aminophenylboronic acid was polymerized in the presence of the following templates: microperoxidase, horseradish peroxidase, lactoperoxidase, and hemoglobin, via oxidation of the monomer by ammonium persulfate. This process resulted in the grafting of a thin polymer layer to the polystyrene surface of the microplates. Imprinting resulted in an increased affinity of the polymer toward the corresponding templates. The influence of the washing procedure, template concentration, and buffer pH on the polymer affinity was analyzed. It was shown that the stabilizing function of the support and spatial orientation of the polymer chains and template functional groups are the major factors affecting the imprint formation and template recognition. Easy preparation of the MIPs, their high stability, and their ability to recognize small and large proteins, as well as to discriminate molecules with small variations in charge, make this approach attractive and broadly applicable in biotechnology, assays and sensors.

"Bite-and-Switch" approach using computationally designed molecularly imprinted polymers for sensing of creatinine.

A method for the selective detection of creatinine is reported, which is based on the reaction between polymerised hemithioacetal, formed by allyl mercaptan, o-phthalic aldehyde, and primary amine leading to the formation of fluorescent isoindole complex. This method has been demonstrated previously for the detection of creatine using creatine-imprinted molecularly imprinted polymers (MIPs) Since MIPs created using traditional methods were unable to differentiate between creatine and creatinine, a new approach to the rational design of a molecularly imprinted polymer (MIP) selective for creatinine was developed using computer simulation. A virtual library of functional monomers was assigned and screened against the target molecule, creatinine, using molecular modelling software. The monomers giving the highest binding score were further tested using simulated annealing in order to mimic the complexation of the functional monomers with template in the monomer mixture. The result of this simulation gave an optimised MIP composition. The computationally designed polymer demonstrated superior selectivity in comparison to the polymer prepared using traditional approach, a detection limit of 25 microM and good stability. The "Bite-and-Switch" approach combined with molecular imprinting can be used for the design of assays and sensors, selective for amino containing substances.

Substitution of antibodies and receptors with molecularly imprinted polymers in enzyme-linked and fluorescent assays.

A new technique for coating microtitre plates with molecularly imprinted polymers (MIP), specific for low-molecular weight analytes (epinephrine, atrazine) and proteins is presented. Oxidative polymerization was performed in the presence of template; monomers: 3-aminophenylboronic acid (APBA), 3-thiopheneboronic acid (TBA) and aniline were polymerized in water and the polymers were grafted onto the polystyrene surface of the microplates. It was found that this process results in the creation of synthetic materials with antibody-like binding properties. It was shown that the MIP-coated microplates are particularly useful for assay development. The high stability of the polymers and good reproducibility of the measurements make MIP coating an attractive alternative to conventional antibodies or receptors used in enzyme linked immunosorbent assay (ELISA).

An assay for ascorbic acid based on polyaniline-coated microplates.

A technique for modification of the microtiter reader plates well with a polyaniline (PANI) film sensitive for ascorbic acid is presented. The principle of the analyte detection is based on monitoring the changes in optical absorption of the PANI film resulting from the reduction process initiated by ascorbic acid. The detection limit for ascorbic acid is 1 mg/L. Testing with real samples (soft drinks, fruit juices) gave good correlation of the method with iodimetric titration. High sensitivity, stability, and good reproducibility of the measurements make the proposed system an attractive alternative to traditional assays, used in medicine, ecology, and biotechnology.

Chemical grafting of molecularly imprinted homopolymers to the surface of microplates. Application of artificial adrenergic receptor in enzyme-linked assay for beta-agonists determination.

A technique for coating of microplate wells with a molecularly imprinted polymer (MIP), specific for epinephrine, is presented. 3-Aminophenylboronic acid was polymerized in the presence of epinephrine using oxidation of the monomer by ammonium persulfate. This process resulted in the grafting of a thin polymer layer onto the polystyrene surface of the microplates. The polymer affinity was determined by an enzyme-linked assay using a conjugate of horseradish peroxidase and norepinephrine (HRP-N). It was found that imprinting resulted in increased affinity of the polymer toward HRP-N and epinephrine. Influence of the buffer pH and concentration on the polymer affinity was analyzed. It was shown that the MIP-coated microplates could be used for assay development and drug screening. The high stability of the polymers and good reproducibility of the measurements make MIP coating an attractive alternative to traditional antibodies or receptors, used in ELISA.