Processability evaluation of multiparticulate units prepared by selective laser sintering using the SeDeM Expert System approach.

3D printing in dosage forms fabrication is in the focus of researchers, however, the attempts in multiparticulate units (MPUs) preparation are scarce. The aim of this study was to fabricate different size MPUs by selective laser sintering (SLS), using different polymers, and investigate their processability based on the SeDeM Expert System approach. MPUs (1- or 2-mm size) were prepared with model drug (ibuprofen or caffeine), polymer (poly(ethylene)oxide (PEO), ethyl cellulose (EC) or methacrylic acid-ethyl acrylate copolymer (MA-EA)) and printing aid. Comprehensive sample characterization was performed and experimentally obtained parameters were mathematically transformed and evaluated using the SeDeM Expert System framework. The obtained samples exhibited irregular shape, despite the spherical printing object design. Polymer incorporated notably affected MPUs properties. The obtained samples exhibited low bulk density, good flowability-, as well as stability-related parameters, which indicated their suitability for filling into capsules or sachets. Low density values implied that compressibility enhancing excipients may be required for MPUs incorporation in tablets. Samples containing EC and MA-EA were found suitable for compression, due to high compacts tensile strength. The obtained results indicate that SeDeM Expert System may extended from powder compressibility evaluation tool to framework facilitating powders/multiparticulate units processing.

Continuous Processing of Micropellets via Hot-Melt Extrusion.

Microparticulate drug delivery systems, e.g., micropellets (MPs), are used in a variety of pharmaceutical formulations such as suspensions, injectable systems, and capsules. MPs are currently manufactured mainly via batch, solvent-based processes, e.g., spray-drying and solvent evaporation-extraction. In this paper, we present a novel, solvent-free, continuous hot-melt extrusion-based approach with an inline cold pelletization step and the potential of unprecedented on-the-fly formulation changes, aiming at producing the smallest particles usable for injectable applications. A biodegradable, crystalline dispersion consisting of poly(DL-lactic acid) (PLA) filled with metformin as the model drug was chosen on purpose to elucidate the broad applicability of the process also to formulations with limited stretchability and complex pelletizability. Next to optical/statistical particle analyses and in-line high-speed camera investigations providing insights into the pelletization process, the injectability of the most promising micropellets was compared to that of one marketed formulation. Fast extrudate haul-off speeds and high numbers of pelletizer knives resulted in particles with a narrow and small particle size distribution with a d50 below 270 µm and aspect ratios close to 1. To omit protruding drug particles to ensure sufficient extrudate stretchability and allow for the smallest MPs, it was found that the d90 of the embedded drug must be significantly below the extrudate diameter. Upon adapting the syringe diameter, the produced micropellets revealed similar injectability parameters to the marketed formulation, showcasing the potential that the proposed setup has for the manufacturing of novel microparticulate formulations.

Gluing Pills Technology: A novel route to multilayer tablet manufacturing.

Layer weight control, delamination and cross-contamination are major challenges in the production of compacted multilayer tablets (MLT). In this work, we describe a novel approach to manufacturing MLT: the Gluing Pills Technology (GPT). High loads of ibuprofen free acid and caffeine anhydrate were blended with microcrystalline cellulose (MCC) and dibasic calcium phosphate dihydrate (DCPD) and compacted into monolayer tablets. They were glued together via the GPT using solutions of either fish gelatin or polyvinylpyrrolidone K90 as gluing agents with defined viscosity. Factors that have a substantial impact on the deformation behavior of blends (i.e., elastic recovery, tensile strength and porosity) of monolayer tablets were investigated in terms of bilayer tablets manufactured via the GPT. The results indicated that high levels of elastic recovery negatively affected the robustness of GPT bilayer tablets and that the type of gluing agent was critical. Raman microscopy analysis was successfully applied to qualitatively assess the function of gluing layer as a barrier to cross-contamination between two monolayer tablets. This study shows the feasibility of the GPT for manufacturing of robust MLT, emphasizing its potential in terms of real-time production of individualized fixed-dose combinations and application in both translational pharmaceutics and personalized medicine.

Pore blocking: An innovative formulation strategy for the design of alcohol resistant multi-particulate dosage forms.

In this work calcium stearate (CaSt) multi-particulates loaded with codeine phosphate (COP) were developed in an attempt to provide extended release (ER) combined with alcohol dose dumping (ADD) resistance. The pellets were prepared via wet/extrusion spheronization and ER characteristics were obtained after fluid bed drying at 30°C. Pore blockers (i.e., xanthan, guar gum and TiO2) were integrated to control the uptake of ethanolic media, the CaSt swelling and consequently, the COP release. While all three pore blockers are insoluble in ethanol, xanthan dissolves, guar gum swells and TiO2 does not interact with water. The incorporation of 10 and 15% TiO2 still provided ER characteristics and yielded ADD resistance in up to 40v% ethanol. The in-vitro data were subjected to PK simulations, which revealed similar codeine plasma levels when the medication is used concomitantly with alcoholic beverages. Taken together the in-vitro and in-silico results demonstrate that the incorporation of appropriate pore blockers presents a promising strategy to provide ADD resistance of multi-particulate systems.