Photorelease of Nitric Oxide (NO) in Mono- and Bimetallic Ruthenium Nitrosyl Complexes: A Photokinetic Investigation with a Two-Step Model.

Two monometallic and three bimetallic ruthenium acetonitrile (RuMeCN) complexes are presented and fully characterized. All of them are built from the same skeleton [FTRu(bpy)(MeCN)]2+, in which FT is a fluorenyl-substituted terpyridine ligand and bpy is the 2,2'-bipyridine. The crystal structure of [FTRu(bpy)(MeCN)](PF6)2 is presented. A careful spectroscopic analysis allows establishing that these 5 RuMeCN complexes can be identified as the product of the photoreaction of 5 related RuNO complexes, investigated as efficient nitric oxide (NO) donors. Based on this set of complexes, the mechanism of the NO photorelease of the bimetallic complexes has been established through a complete investigation under irradiations performed at 365, 400, 455, and 490 nm wavelength. A two-step (A → B → C) kinetic model specially designed for this purpose provides a good description of the mechanism, with quantum yields of photorelease in the range 0.001-0.029, depending on the irradiation wavelength. In the first step of release, the quantum yields (ϕAB) are always found to be larger than those of the second step (ϕBC), at any irradiation wavelengths.

Oscillatory Motion of an Organic Droplet Reflecting a Reaction Scheme.

An organic droplet containing thymol acetate (TA) floating on a sodium dodecyl sulfate aqueous phase was examined to develop a novel self-propelled object based on reaction kinetics. Two types of oscillatory motion, without back-and-forth motion (Osc I) and with back-and-forth motion (Osc II), were observed by varying the pH of the aqueous phase. The oscillation frequency reached its maximum at pH 9.6, coinciding with the occurrence of Osc II. The kinetics of the hydrolysis of TA as a reactant and the acid-base equilibrium between thymol (TOH) and the thymolate ion (TO-) as products were evaluated experimentally. The driving force of motion was discussed on the basis of the interfacial tension. The pH dependence of the oscillation frequency and the selection of Osc I or II were attributed to the equilibrium between the TOH and TO-. These results highlight the possibility of designing self-propulsion systems by considering reaction kinetics and chemical properties.

Photoswitchable assembly of long-lived azobenzenes in water using visible light.

HYPOTHESIS: Switchable assemblies relevant for bio-applications may be accessed from water-soluble tetra-ortho-substituted azobenzenes that reversibly self-assemble and form complexes with ß-cyclodextrin under visible light. EXPERIMENTS: Two azobenzenes bearing either four fluorines or two chlorines and two fluorines in the ortho positions were synthesised with short poly(ethylene oxide) tails for water solubility. Photophysical properties were determined by UV-vis and 1H NMR spectroscopies, complexation with ß-cyclodextrin was assessed by 1H NMR spectroscopy, and self-assembly in water was investigated by static and dynamic light scattering. FINDINGS: Both molecules underwent trans-cis isomerization at 530 nm and cis-trans isomerization at 415 nm, with the cis forms exhibiting thermal half-lives > 300 days at room temperature. Both molecules formed inclusion complexes with ß-cyclodextrin in water, with cis-4F-AZO-PEO binding 3-fold stronger than trans, and 2Cl2F-AZO-PEO binding significantly weaker. Self-assembly of pure 2Cl2F-AZO-PEO in water showed an open association process regardless of configuration, while 4F-AZO-PEO showed an open association process for cis (Nagg increasing from 30 to 1000) but a closed association process for trans (Nagg stable at âˆ¼ 170). Aqueous solutions of 2Cl2F-AZO-PEO showed cloud points close to 45 °C, while the 4F-AZO-PEO isomers presented well-separated cloud points allowing reversible and all-visible transition between clear and turbid states at room temperature.

Spontaneous spinning of a dichloromethane drop on an aqueous surfactant solution.

We report a series of experiments carried out with a dichloromethane drop deposited on the surface of an aqueous solution containing a surfactant, cetyltrimethylammonium bromide. After an induction stage during which the drop stays axisymmetric, oscillations occur along the contact line. These oscillations are succeeded by a spectacular spontaneous spinning of the drop. The latter quickly takes the form of a two-tip 'rotor' and the spinning rate stabilizes at a constant value, no longer varying despite the gradual changes of the drop shape and size. The drop eventually disappears due to the continual dissolution and evaporation of dichloromethane. Schlieren visualizations and particle image velocimetry are used to establish a consistent scenario capable of explaining the evolution of the system. The Marangoni effect induced by the dissolution of dichloromethane in the drop vicinity is shown to be responsible for the observed dynamics. Arguments borrowed from dynamical systems theory and from an existing low-order model allow us to explain qualitatively why the system selects the spinning configuration. The geometry of the immersed part of the drop is shown to play a crucial role in this selection process, as well as in the regulation of the spinning rate.

Enhancing the yield of calcium carbonate precipitation by obstacles in laminar flow in a confined geometry.

Flow-driven precipitation experiments are performed in model porous media shaped within the confinement of a Hele-Shaw cell. Precipitation pattern formation and the yield of the reaction are investigated when borosilicate glass beads of different sizes are used in a mono-layer arrangement. The trend of the amount of precipitate produced in various porous media is estimated via visual observation. In addition, a new method is elaborated to complement such image analysis based results by titration experiments performed on gel-embedded precipitate patterns. The yield of confined porous systems is compared to experiments carried out in unsegmented reactors. It is found that the obstacles increase the amount of product and preserve its radial spatial distribution. The precipitate pattern is successfully conserved in a slightly cross-linked hydrogel matrix and its microstructure is examined using SEM. The spatial distribution of the precipitate across the cell gap is revealed using X-ray microtomography.

Rotational synchronization of camphor ribbons in different geometries.

We present experiments on multiple pinned self-propelled camphor ribbons, which is a rectangular piece of paper with camphor infused in its matrix. Experiments were performed on three, four, and five ribbons placed in linear and polygonal geometries. The pinned ribbons rotate on the surface of water, due to the surface tension gradient introduced by the camphor layer in the neighborhood of the ribbon. This camphor layer leads to a chemical coupling between the ribbons. In different geometries, the ribbons have been observed to rotationally synchronize in all the possible configurations. A numerical model, emulating the interactions between the ribbons as Yukawa interaction was studied, which was qualitatively able to reproduce the experimental findings.

Quantitative Kinetic Modeling in Photoresponsive Supramolecular Chemistry: The Case of Water-Soluble Azobenzene/Cyclodextrin Complexes.

Hydrophilic host-guest complexes, consisting of water-soluble azobenzene and α-, ß-, or γ-cyclodextrins, have been proposed as a model to study supramolecular photoresponsive systems in aqueous environments through a full spectrometric approach combined with a simulation and data fitting methodology. Various essential and complementary spectroscopic techniques have been used: circular dichroism to determine whether the complex is formed or not, NMR for the stoichiometry elucidation, and UV-visible spectrophotometry to obtain the association equilibrium constant of each complex and the quantum yield for each photochemical process. A step-by-step fitting procedure is presented, which enables the determination of all thermodynamic and photokinetic parameters. A sequential methodology is applied to dissipate all uncertainties on the variability of the results and to develop a relevant and reliable protocol applicable to other types of complexes. The proposed procedure has thus been shown to be very robust and largely applicable to other photoresponsive host-guest systems.

Role of Polymer Micelles in the Delivery of Photodynamic Therapy Agent to Liposomes and Cells.

The use of nanocarriers for hydrophobic photosensitizers, in the context of photodynamic therapy (PDT) to improve pharmacokinetics and bio-distribution, is well-established. However, the mechanisms at play in the internalization of nanocarriers are not well-elucidated, despite its importance in nanocarrier design. In this study, we focus on the mechanisms involved in copolymer poly(ethylene oxide)-block-poly(-caprolactone) PEO-PCL and poly(ethylene oxide)-block-poly styrene PEO-PS micelles - membrane interactions through complementary physico-chemical studies on biomimetic membranes, and biological experiments on two-dimensional (2D) and three-dimensional (3D) cell cultures. Förster Resonance Energy Transfer measurements on fluorescently-labelled lipid vesicles, and flow cytometry on two cancerous cell lines enabled the evaluation in the uptake of a photosensitizer, Pheophorbide a (Pheo), and copolymer chains towards model membranes, and cells, respectively. The effects of calibrated light illumination for PDT treatment on lipid vesicle membranes, i.e., leakage and formation of oxidized lipids, and cell viability, were assessed. No significant differences were observed between the ability of PEO-PCL and PEO-PS micelles in delivering Pheo to model membranes, but Pheo was found in higher concentrations in cells in the case of PEO-PCL. These higher Pheo concentrations did not correspond to better performances in PDT treatment. We demonstrated that there are subtle differences in PEO-PCL and PEO-PS micelles for the delivery of Pheo.

Rotational synchronization of camphor ribbons.

Experiments on interacting pinned self-propelled rotators are presented. The rotators are made from paper with camphor infused in its matrix. The ribbons rotate due to Marangoni effect driven forces arising by virtue of surface tension gradients. Two such self-rotating camphor ribbons are observed to experience a repulsive coupling via the camphor layer in the common water medium. Lag synchronization in both corotating (same sense of rotation) and counterrotating (opposite sense of rotation) ribbons is reported for the experiments. This synchronization is found to be dependent on the pivot to pivot distance l. For distances less than the span of both the ribbons, l_{c}, the rotators successfully synchronize. Furthermore, it is experimentally perceived that synchronization in the counterrotating ribbons is more robust than in the corotating ribbons. We rationalize the mechanism of this synchronization via a theoretical model involving a Yukawa type interaction which is analyzed numerically.

Polymeric micelles encapsulating photosensitizer: structure/photodynamic therapy efficiency relation.

Various polymeric micelles were formed from amphiphilic block copolymers, namely, poly(ethyleneoxide-b-ε-caprolactone), poly(ethyleneoxide-b-d,l-lactide), and poly(ethyleneoxide-b-styrene). The micelles were characterized by static and dynamic light scattering, electron microscopy, and asymmetrical flow field-flow fractionation. They all displayed a similar size close to 20 nm. The influence of the chemical structure of the block copolymers on the stability upon dilution of the polymeric micelles was investigated to assess their relevance as carriers for nanomedicine. In the same manner, the stability upon aging was assessed by FRET experiments under various experimental conditions (alone or in the presence of blood proteins). In all cases, a good stability over 48 h for all systems was encountered, with PDLLA copolymer-based systems being the first to release their load slowly. The cytotoxicity and photocytotoxicity of the carriers were examined with or without their load. Lastly, the photodynamic activity was assessed in the presence of pheophorbide a as photosensitizer on 2D and 3D tumor cell culture models, which revealed activity differences between the 2D and 3D systems.

Mass-spring model of a self-pulsating drop.

Self-pulsating sessile drops are a striking example of the richness of far-from-equilibrium liquid/liquid systems. The complex dynamics of such systems is still not fully understood, and simple models are required to grasp the mechanisms at stake. In this article, we present a simple mass-spring mechanical model of the highly regular drop pulsations observed in Pimienta, V.; Brost, M.; Kovalchuk, N.; Bresch, S.; Steinbock, O. Complex shapes and dynamics of dissolving drops of dichloromethane. Angew. Chem., Int. Ed. 2011, 50, 10728-10731. We introduce an effective time-dependent spreading coefficient that sums up all of the forces (due to evaporation, solubilization, surfactant transfer, coffee ring effect, solutal and thermal Marangoni flows, drop elasticity, etc.) that pull or push the edge of a dichloromethane liquid lens, and we show how to account for the periodic rim breakup. The model is examined and compared against experimental observations. The spreading parts of the pulsations are very rapid and cannot be explained by a constant positive spreading coefficient or superspreading.

Hydrodynamic instability in the open system of the iodate-arsenous acid reaction.

Hydrodynamic instability arising in horizontally propagating vertical chemical fronts leading to the formation of a single stable convection roll is investigated experimentally in the iodate-arsenous acid reaction for various stoichiometry. In the presence of a free surface, the tilted reaction front becomes more elongated due to the evaporation of the surface active iodine and the decrease in the surface tension during the reaction. The experimental conditions are then identified where Marangoni instability represents the driving force for the distortion of the reaction front at the surface.

C-H bond activation of benzene by unsaturated η2-cyclopropene and η2-benzyne complexes of niobium.

We report the synthesis of a niobium cyclopropyl complex, Tp(Me2)NbMe(c-C(3)H(5))(MeCCMe), and show that thermal loss of methane from this compound generates an intermediate that is capable of activating both aliphatic and aromatic C-H bonds. Isotopic labeling, trapping studies, a detailed kinetic analysis, and density functional theory all suggest that the active intermediate is an η(2)-cyclopropene complex formed via ß-hydrogen abstraction rather than an isomeric cyclopropylidene species. C-H activation chemistry of this type represents a rather unusual reactivity pattern for η(2)-alkene complexes but is favored in this case by the strain in the C(3) ring which prevents the decomposition of the key intermediate via loss of cyclopropene.

Quantitative investigations of cation complexation of photochromic 8-benzothiazole-substituted benzopyran: towards metal-ion sensors.

The photochromic, thermochromic and metallochromic behaviour of a series of three spiro[indoline-8-(benzothiazol-2-yl)-benzopyrans] has been investigated. The thermodynamic and kinetic parameters of their thermal equilibrium between the ring-closed (spiro) and ring-opened (merocyanine) isomeric forms have been determined using UV-Vis absorption and (1)H NMR spectroscopies. By adding Co(ii) and Ni(ii) ions in acetonitrile solution, 1 : 1 and 1 : 2 metal : merocyanine complexes are formed simultaneously. Using appropriate numerical methods, the kinetic analysis of the complexation allowed us to determine accurately key thermodynamic and spectroscopic parameters of the metal complexes. Results showed that the complexation strength is very sensitive to the size of the indoline nitrogen substituent. Complexation can be reversed by shining white light on the coloured complexes which regenerates the inactive spiropyran form, and releases the metallic ion; hence, these systems display fully reversible negative photochromism. The Zn(ii) complexes exhibit intense fluorescence in the 600-800 nm wavelength range. All these behaviours make these spiropyrans bearing benzothiazole heterocycles promising building blocks for the future construction of photodynamic chemosensors for transition metal ions.

Partition and water/oil adsorption of some surfactants.

Adsorption isotherms have been determined at the water/oil interface for five biphasic systems involving surfactants (non-ionic and ionic) present in both phases at partition equilibrium. The systems studied were polyoxyethylene(23)lauryl ether (Brij35) in water/hexane and four ionic surfactants, hexadecyltrimethylammonium bromide (CTAB), and a series of three tetraalkylammonium dodecylsulfate (TEADS, TPADS, and TBADS) in water/CH 2Cl 2. Interfacial tension measurements performed at the water/air and water/oil interfaces provided all the necessary information for the determination of the adsorption parameters by taking partition into account. These measurements also allowed the comparison of the adsorption properties at both interfaces which showed an increase of the adsorption equilibrium constant and a decrease of the maximum surface concentration at the water/oil interface compared to water/air. The values of the critical aggregation concentration showed, in all cases, that only the surfactant dissolved in the aqueous phase contribute to the decrease of the water/oil interfacial tension. In the case of the four ionic surfactants, the critical aggregation concentration obtained in biphasic conditions were lowered because of the formation of mixed surfactant-CH 2Cl 2 aggregates.

Association, partition, and surface activity in biphasic systems displaying relaxation oscillations.

Several biphasic systems giving rise to periodical Marangoni instability have been analyzed from the point of view of the physicochemical properties of the involved compounds. In each case, the compound at the origin of the oscillatory behavior has been identified: the reactant cetyltrimethylammonium bromide (CTAB) for the CTAB/picric acid (PH) system and the product of reaction dodecyl sulfate tetraalkylammonium (TAADS) for the sodium dodecyl sulfate/tetraalkylammonium bromide (SDS/TAAB) system. The properties of the latter system have been varied progressively by increasing the chain length of the tetraalkylammonium ion. Oscillations were observed whichever the direction of transfer (from water to dichloromethane and from dichloromethane to water). The comparison of the dynamic interfacial tension, recorded during transfer, to equilibrium measurements shows that the instability is favored when partition is highly in favor of the organic phase. The main criteria for the appearance of the instability are a high surface activity and a low interfacial adsorption.

Amphiphilic organic ion pairs in solution: a theoretical study.

The macroscopic manifestation of hydrophobic interactions for amphiphilic organic ion pairs (tetraalkylammonium-anion) has been shown experimentally by measuring their association constants and their affinity with the organic phase. Beyond a certain size, there is a direct relation between association constants and chain lengths in tetraalkylammonium ions. We propose to cast a bridge between these results and geometrical properties considered at the level of a single ion pair by means of quantum chemistry calculations performed on model systems: trimethylalkylammonium-pentyl sulfate instead of tetraalkylammonium-dodecyl sulfate. Two limiting cases are considered: head-to-head configurations, which yield an optimal electrostatic interaction between polar heads, and parallel configurations with a balance between electrostatic and hydrophobic interactions. All properties (geometries, complexation energies, and atomic charges) were obtained at the MP2 level of calculation, with water described by a continuum model (CPCM). Dispersion forces link hydrocarbon chains of tetraalkylammonium ions and pentyl sulfate, thus yielding (for the largest ion pairs) parallel configurations favored with respect to head-to-head geometries by solute-solvent electrostatic interactions. Given the small experimental association energies, we probe the accuracy limit of the MP2 and CPCM methods. However, clear trends are obtained as a function of chain length, which agree with the experimental observations. The calculated monotonic stabilization of ion pairs when the hydrocarbon chain increases in length is discussed in terms of electrostatic interactions (between ions and between ion pairs and water), dispersion forces, and cavitation energies.

Determining the association constant and adsorption properties of ion pairs in water by fitting surface tension data.

Association constants and adsorption parameters of tetraalkylammoniumdodecyl sulfate (TAADS) ion pairs in water were determined. We have analyzed water/air surface tension measurements obtained for mixtures of sodium dodecyl sulfate (SDS) and tetraalkylammonium bromide of increasing chain lengths (TMAB, TEAB, TPAB, and TBAB). To reproduce the experimental isotherms, we coupled the association equilibrium of the ion pairs to the equations proposed by Fainerman and co-workers to model the adsorption of binary mixtures of surfactants (SDS and TAADS) with different molar areas at a nonideal surface layer. The parameters found showed that the model is not convenient to describe the effect of the addition of TMAB but a clear coherency was obtained for the three longer compounds. Ranging from TEADS to TBADS increasing hydrophobic interactions give rise to a higher associability but to a lower surface activity. Self-interactions coefficients extracted by the fitting procedure confirmed the importance of attractive interactions between the ion pairs. The calculated surface coverage showed that in every case the compound mainly adsorbed at the interface was the ion pair. For TBADS strong attractive interactions result in a phase transition at very low concentration.

Hydrogen peroxide evolution during V-UV photolysis of water.

Hydrogen peroxide evolution during the vacuum-ultraviolet (V-UV, 172 nm) photolysis of water is considerably affected by the presence of oxalic acid (employed as a model water pollutant) and striking differences are observed in the absence and in the presence of dioxygen.