Assessment of a Side-Row Continuous Canopy Shaking Harvester and Its Adaptability to the Portuguese Cobrançosa Variety in High-Density Olive Orchards.

The olive tree is an important crop in Portugal, where different levels of intensification coexist. The traditional olive orchards present profitability problems, mainly due to harvesting, so there has been a drastic reconversion towards high-density or super-high-density olive orchards. The latter present major constraints due to very specific needs for their use, being practically destined for new orchards. Consequently, the possibility of using systems based on canopy shakers in high-density olive orchards with local varieties is promising. The objective of this work is to evaluate a prototype canopy shaker for the harvesting of high-density olive orchards of the Portuguese variety 'Cobrançosa'. The evaluation is based on the study of canopy shaking in order to adapt canopy training and the adaptability of the machine. For this purpose, the vibration of 72 points of the tree canopy was recorded and a qualitative assessment of the harvest was carried out. Differences were found between the different zones according to the direction of the forward movement of the harvester and the distance to the trunk. These differences were associated with the values obtained for fruit detachment, and a greater quantity of fruit was harvested in the areas of the canopy in contact with the rods.

Evaluation of Olive Pruning Effect on the Performance of the Row-Side Continuous Canopy Shaking Harvester in a High Density Olive Orchard.

In 2009, the Side-Row Continuous Canopy Shaking Harvester project was set to develop such technology. The prototype comprises two symmetrical harvesters trailed by a farm tractor. Each harvester has a vibratory rotor with flexible rods, a catching platform with conveyors belts delivering fruits to a temporary storage bag. The removal efficiency of canopy shakers are influenced by factors like shaking frequency, ground speed as well as the dimension and shape of olive canopy. In 2014 authors started a trial to evaluate the influence of pruning in olive yield and in the performance of the Side-Row Continuous Canopy Shaking Harvester. The trial was established in an irrigated olive orchard of Picual cultivar planted in 1996 with the array 7 m x 3.5 m. In a randomised complete block design with three replications, four treatments are being compared leading to 12 plots with 30 trees/plot. The treatments under study are: T1-manual pruning using chain saws, in 2014 and 2017; T2-mechanical pruning: topping and hedging the two sides of the canopy, followed by manual pruning complement to remove wood suckers inside the canopy, in 2014 and 2017; T3-mechanical pruning: topping the canopy parallel to the ground and hedging southeast side of the canopy in 2014 and 2017; topping the canopy in July 2015 (summer pruning); hedging northwest side in winter 2016; T4-mechanical pruning: topping and hedging the two sides of the canopy in 2014 and 2017; topping the canopy in July 2015 (summer pruning). Regarding to olive yield per tree, significant differences were found among treatments on different years. However, no significant differences were found regarding the average olive yield per tree, over the period of 2014-2017. Regarding to the olive removal efficiency, only in 2016, significant differences were found among treatments on different years. No significant differences were found regarding the average of the olive removal efficiency, over the period of 2014-2017.