Influence of Apical Diameter on Filling Material Extrusion during Retreatment - A Micro-CT and CBCT evaluation.

AIM: To investigate whether foraminal widening performed at primary treatment has an effect on the amount of apically extruded obturator material during retreatment and to evaluate the sensitivity of cone beam computed tomography (CBCT) in detecting extruded obturator material. METHODS: Forty palatal roots of maxillary molars were selected based on micro-CT and divided into two groups (n=20): with foraminal widening (WE) and without foraminal widening (NE). To standardize the apical foramen, all specimens were instrumented to the foramen using the Protaper Next system, up to instrument X3. The WE group was instrumented to the foramen up to instrument X5, and the NE group was instrumented 1 mm lower. The canals were obturated 1 mm below the apical foramen with gutta-percha and AH Plus and stored for 7 days at 37 °C and 95% humidity. Roots were fixed in microtubes filled with 1.5% agar gel. The obturation material was removed with Reciproc R50. Scans of the teeth and agar were performed using micro-CT and CBCT. Comparison between groups and between methods was performed using Mann-Withney test (p ≤0.05). RESULTS: No statistical difference was found when comparing the extruded material between groups using micro-CT (p = 0.589) or CBCT (p = 0.953). CBCT measured a greater volume of extruded material than micro- CT (p = 0.0004). CONCLUSION: Foraminal widening had no effect on the extrusion of filling material during retreatment. The CBCT favored the evaluation of apically extruded filling material.

Influence of Apical Diameter on Filling Material Extrusion during Retreatment - A Micro-CT and CBCT evaluation

Abstract Aim: To investigate whether foraminal widening performed at primary treatment has an effect on the amount of apically extruded obturator material during retreatment and to evaluate the sensitivity of cone beam computed tomography (CBCT) in detecting extruded obturator material. Methods: Forty palatal roots of maxillary molars were selected based on micro-CT and divided into two groups (n=20): with foraminal widening (WE) and without foraminal widening (NE). To standardize the apical foramen, all specimens were instrumented to the foramen using the Protaper Next system, up to instrument X3. The WE group was instrumented to the foramen up to instrument X5, and the NE group was instrumented 1 mm lower. The canals were obturated 1 mm below the apical foramen with gutta-percha and AH Plus and stored for 7 days at 37 °C and 95% humidity. Roots were fixed in microtubes filled with 1.5% agar gel. The obturation material was removed with Reciproc R50. Scans of the teeth and agar were performed using micro-CT and CBCT. Comparison between groups and between methods was performed using Mann-Withney test (p ≤0.05). Results: No statistical difference was found when comparing the extruded material between groups using micro-CT (p = 0.589) or CBCT (p = 0.953). CBCT measured a greater volume of extruded material than micro- CT (p = 0.0004). Conclusion: Foraminal widening had no effect on the extrusion of filling material during retreatment. The CBCT favored the evaluation of apically extruded filling material.

Resumo Objetivo: Investigar se o alargamento do foramen realizado durante o tratamento primário tem um efeito na quantidade de material obturador apicalmente extruído durante oretratamento e verificar a sensibilidade da tomografia computorizada de feixe cônico (TCFC) na detecção de material obturador extruído. Métodos: Quarenta raízes palatinas de molares superiores foram selecionadas de acordo com a microtomografia computorizada, e foram divididas em dois grupos (n=20): com alargamento do foraminal (CA) e sem alargamento do foraminal (SA). Para padronizar o forame apical, todas as amostras foram instrumentadas com o sistema ProTaper Next até ao instrumento X3 até o forame. O grupo CA foi instrumentado até ao instrumento X5 até o forame, e o grupo SA foi instrumentado 1 mm aquém. Os canais foram obturados 1 mm abaixo do forame apical com gutta-percha e AH Plus e armazenados durante 7 dias a 37 °C e 95% de umidade. As raízes foram fixadas em microtubos preenchidos com gel de ágar a 1,5%. O material obturador foi removido com Reciproc R50. Os escaneamentos dos dentes e do ágar foram realizados com micro-CT e CBCT. A comparação entre grupos e entre métodos foi realizada utilizando o teste Mann-Withney (p ≤0.05). Resultados: Não foi encontrada diferença estatística ao comparar o material extruído entre grupos utilizando o Micro-CT (p = 0,589) ou TCFC (p = 0,953). Foi medido um volume maior de material extruído com a TCFC do que com a Micro- CT (p = 0,0004). Conclusão: O alargamento foraminal não teve qualquer efeito na extrusão do material obturador durante o retratamento. A TCFC favoreceu a avaliação do material de obturador apicalmente extruído.

Prognosis for the impacted lower third molars: Panoramic reconstruction versus tomographic images.

OBJECTIVE: The aim of this cross-sectional accuracy study was to compare panoramic reconstruction (PR) and multiplanar reconstruction (MPR) images, which are used to establish the prognosis for impacted mandibular third molars in relation to professional decision making. STUDY DESIGN: Images of 10 patients who had undergone cone beam computed tomography (CBCT) examination were selected, resulting in 2 distinct groups of images, with 10 in each group: PR and MPR. To check prognostic accuracy, 2 images from each group were randomly selected and reinserted into the sample, totaling 24 images. A questionnaire was completed by 54 professionals: 27 orthodontists and 27 oral and maxillofacial surgeons (OMFSs). Data were evaluated by using the χ2 and McNemar's tests and Kappa statistics at P < .05. RESULTS: There were no statistically significant differences when isolated PR images were compared with MPR images by orthodontists (P = .72) or OMFSs (P = .45). However, there were significant differences in the professional decision regarding the prognosis for impacted teeth, where OMFSs indicated the need for more extractions compared with orthodontists (P < .0001). CONCLUSIONS: There are no differences between PR and multiplanar CBCT images with regard to the determination of the prognosis for impacted mandibular third molars. However, there was a difference in the decision making between the different specialties.

Mucopolysaccharidosis VI and effects on growth of the apical bases: a case report.

OBJECTIVE: Mucopolysaccharidosis (MPS) VI is a rare disorder caused by an autosomal recessive mutation in the short arm of chromosome 5 (5q12-13) leading to an N-acetylgalactosamine-sulfatase lysosomal enzyme deficiency and numerous systemic clinical changes. The oral and maxillofacial complex may exhibit tooth eruption anomalies, macroglossia, gingival hypertrophy, mouth breathing, increased lower facial height, open bite, retrognathia, and progressive TMJ arthrosis. This report describes craniofacial growth changes in two MPS VI patients, sisters and daughters of outbred parents, who were longitudinally monitored from 11 to 15 years of age. STUDY DESIGN: Skull lateral teleradiography and cephalometric tracings were performed. The measurements were assessed in the anteroposterior and vertical directions based on protocols by McNamara and Usp/Unicamp and compared to the normal reported ranges. RESULTS: A similar skeletal class III malocclusion was observed in both patients. The jaw was retruded, the anterior skull base decreased, and the mandibular body was normal or larger than normal. The vertical growth direction differed between the patients; one was hyperdivergent, while the other was hypodivergent. CONCLUSIONS: By understanding the craniofacial growth changes in MPS VI patients, new treatment options may be developed for affected patients.

Computed Tomographic Artifacts in Maxillofacial Surgery.

OBJECTIVES: The present study aimed to present 4 cases and to undertake a systematic review on the current knowledge of the impact of cone beam computed tomographic (CBCT) artifacts on oral and maxillofacial surgical planning and follow-up. METHODS: The MEDLINE (PubMed) database was searched for the period from February 2004 to February 2017, for studies on the impact of CBCT artifacts on surgical planning of oral and maxillofacial surgeries. The PRISMA statement was followed during data assessment and extraction. As a result, data extraction included information regarding: the use of CBCT to plan or follow-up oral and maxillofacial surgeries, presence and type identification of a CBCT artifact, and details on the impact of artifacts on image quality and/or surgical planning. Four cases were selected to illustrate the topic. RESULTS: The search strategy yielded 408 publications in MEDLINE (PubMed). An initial screening of the publications was performed using abstracts and key words. After application of exclusion criteria, a total of 11 studies were finally identified as eligible to be discussed. Studies revealed 3 main types of artifact: beam hardening, streak, and motion artifacts. Most of the studies suggest that artifacts significantly affect oral and maxillofacial surgical planning and follow-up, despite of allowing for identification of metal projectiles in cases of maxillofacial trauma. CONCLUSION: CBCT artifacts have a significant impact on oral and maxillofacial surgical planning and follow-up.

Effectiveness of Periapical Radiography Versus Cone Beam Computed Tomography with Different Kilovoltage Settings in the Detection of Chemically Created Peri-implant Bone Defects: An In Vitro Study.

PURPOSE: To determine the effectiveness of cone beam computed tomography (CBCT) images obtained with different kilovoltage settings compared with intraoral periapical photostimulable storage phosphor (PSP) plate images in the detection of chemically created peri-implant defects utilizing a bovine rib bone model in vitro. MATERIALS AND METHODS: After placing 80 implants in bovine ribs, peri-implant circumferential bone defects of different sizes were created with 70% perchloric acid. CBCT images (3D Accuitomo 170) were acquired at 90 and 75 kVp, and intraoral periapical images were acquired using a PSP system (Carestream KODAK, CS 7600). Using a 5-point Likert scale, two oral and maxillofacial radiologists (OMR) and two oral and maxillofacial surgeons (OMS) evaluated the likelihood of a bone defect being absent or present. The kappa statistic was used to compare observer agreement, and area under the curve values were compared using analysis of variance and the post hoc Tukey test. Significance was set at P ≤ .05. RESULTS: PSP reliability ranged from discordance to slight for small defects and fair to moderate for larger defects. For CBCT, OMRs had good agreement for defects using 90 kVp, and slight to fair using 75 kVp. Agreement for OMS observations was fair for 75 kVp, and varied from slight to good for 90 kVp. Small lesions were detected more effectively by CBCT than by PSP, and larger lesions were detected more effectively by CBCT at 90 kVp than by CBCT at 75 kVp or by PSP. CONCLUSION: CBCT imaging at 90 kVp was associated with a significantly higher rate of detection of both small and large chemically simulated bone defects than PSP or CBCT at 75 kVp. CBCT imaging at 75 kVp proved better than PSP for the detection of small defects.

Performance of cone beam computed tomography and conventional intraoral radiographs in detecting interproximal alveolar bone lesions: a study in pig mandibles.

BACKGROUND: Cone beam computed tomography (CBCT) has been largely used in dentistry. Nevertheless, there is lack of evidence regarding CBCT accuracy in the diagnosis of early periodontal lesions as well as the correlation between accuracy and lesion size. The aim of this study was to evaluate accuracy of CBCT and conventional intraoral radiographs in detecting different-sized interproximal bone lesions created in pig mandibles. The hypothesis was that CBCT accuracy would be superior to radiographs in detecting incipient bone lesions. METHODS: Twenty swine dry mandibles were used, totalizing 80 experimental sites. Four groups were created according to exposure time to perchloric acid 70-72%: controls (no exposure), 2-hour exposure, 4-hour exposure, and 6-hour exposure. Standardized CBCT and conventional intraoral radiographs were taken and analyzed by two trained radiologists. The presence of lesions in the dry mandible was considered the gold standard. Sensitivity, specificity, and accuracy in detecting different-sized bone lesions were calculated for CBCT and intraoral radiographs. RESULTS: Accuracy of CBCT ranged from 0.762 to 0.825 and accuracy of periapical radiography ranged from 0.700 to 0.813, according to examiner and time of acid exposure. Inter-examiner agreement varied from slight to fair, whereas intra-examiner agreement varied from moderate to substantial. CONCLUSIONS: CBCT performance was not superior to that provided by conventional intraoral radiographs in the detection of interproximal bone loss.

Effect of Cone-Beam Computed Tomography Field of View and Acquisition Frame on the Detection of Chemically Simulated Peri-Implant Bone Loss In Vitro.

BACKGROUND: The aim of this study is to determine the influence of field of view (FOV) and number of acquisition projection images (frames) on the detection of chemically simulated peri-implant defects by cone-beam computed tomography (CBCT) using an in vitro bovine rib bone model. METHODS: Eighty implants were placed in bovine ribs in which small and large bone defects were created using 70% perchloric acid. CBCT images were acquired at three acquisition protocols: protocol 1 (FOV 4 × 4 cm, 0.08-mm voxel size, 1,009 frames [high fidelity]; protocol 2 (same as protocol 1 except 512 frames [standard]); and protocol 3 (FOV 14 × 5 cm, 0.25-mm voxel size; high fidelity). Two oral and maxillofacial radiologists (OMRs) and two oral and maxillofacial surgeons (OMSs) rated the presence or absence of bone defects on a five-point scale. κ and area under the curve (AUC) were calculated and compared using analysis of variance with post hoc Tukey test at P ≤ 0.05. RESULTS: Intra- and interobserver agreement for OMRs ranged from moderate to good and from slight to moderate for OMSs. For the detection of small lesions, protocol 1 (AUC 0.813 ± 0.045) provided higher detection rates than protocol 2 (AUC 0.703 ± 0.02) and protocol 3 (AUC 0.773 ± 0.55) [F(2,9) = 1.6377]. For larger defects, the trends were similar, with protocol 1 (AUC 0.852 ± 0.108) providing higher detection rates than protocol 2 (AUC 0.730 ± 0.045) and protocol 3 (AUC 0.783 ± 0.058) [F(2,9) = 1.9576]. CONCLUSION: Within the limits of this study, optimal detection of chemically simulated pericircumferential implant crestal bone defects is achieved at the least radiation detriment using the smallest FOV, the highest number of acquisition frames, and the smallest voxel.

Detection of horizontal root fracture using four different protocols of cone-beam computed tomography.

The purpose of this study was to analyze four different cone-beam computed tomography (CBCT) protocols to identify horizontal root fractures (HRF) in endodontically treated teeth, with or without the presence of a metallic post. Thirty extracted single-rooted human premolars were treated endodontically. Afterwards, an observer induced a horizontal fracture in 15 teeth. Each tooth was inserted in an empty mandibular socket and submitted to a computed tomography scan taken with and without the metallic post. The acquisition followed four different protocols, with different fields of view (FOV) and voxel sizes, as follows: FOV 6 X 16 cm/0.2 mm voxel; FOV 6 X 16 cm/0.25 mm voxel; FOV 8 X 8 cm/0.2 mm voxel; FOV 8 X 8 cm/0.25 mm voxel. Two observers checked all the acquisitions within a two-week interval, and the values of sensitivity, specificity, accuracy and kappa were calculated. The sensitivity, specificity and accuracy values were better for the 8 X 8 cm/0.2 mm and 16 X 6 cm/0.25 mm protocols, ranging from 0.60 to 0.86 and 0.53 to 0.80, respectively. The intra- and interobserver concordance ranged from 0.65 to 0.72. The protocols where FOV and voxel were proportional showed better results. The 8 x 8 cm/0.2 mm protocol had the least interference from the metallic artifact. All four protocols showed a decline in values in the presence of the metallic artifact.

Effect of field of view in the detection of chemically created peri-implant bone defects in bovine ribs using cone beam computed tomography: an in vitro study.

OBJECTIVES: To assess the accuracy of cone beam computed tomography (CBCT) using two fields of view (FOVs) in the diagnosis of peri-implant defects. STUDY DESIGN: Eighty implants were placed in bovine ribs, in which peri-implant bone defects of two sizes (T1 and T2) were simulated using 70% perchloric acid. CBCT images were acquired with the use of two FOV size settings of the i-CAT NG unit: 6 × 16 cm and 8 × 8 cm. One oral and maxillofacial surgeon (OMS) and two oral and maxillofacial radiologists (OMRs) evaluated the presence of defects, and their findings were compared with direct visual evaluation. The kappa (κ)-statistic, area under the curve (AUC), sensitivity, specificity, positive predictive value (PPV), and negative predictive value (NPV) of the examinations were calculated. AUC values were compared with the Student t test. RESULTS: The obtained κ-values indicated good intra- and interobserver agreement. A significant difference was found between T1 and T2 (P = .01) with regard to AUC values, and no significant difference was found between the different FOVs in both test groups (T1, P = .06; T2, P = .33). The sensitivity, specificity, PPV, and NPV of the examinations were higher for the OMRs than for the OMS involved in the study. CONCLUSIONS: The ability of CBCT to detect chemically created peri-implant bone defects was good, especially for larger defects (Group T2) but only for the observations of the OMRs. The observations of the OMS were less accurate. The two FOVs tested were appropriate to detect peri-implant bone defects.

CBCT-based evaluation of integrity of cortical sinus close to periapical lesions.

The purpose of the present study was to test the applicability of cone beam computed tomography (CBCT) to evaluate the integrity of the cortical sinus close to periapical lesions. Two observers analyzed samples of 64 alveoli of first molar roots in macerated swine maxillas prepared with perchloric acid to simulate periapical lesions. The specimens were evaluated using CBCT (55-mm high and 100-mm diameter cylinder at 0.2-mm voxel resolution) for the presence of oroantral communication (OAC) caused by the simulated lesions. Sensitivity, specificity, and accuracy were calculated. Fair values were obtained for accuracy (66%-78%) and good values for specificity (70%-98%), whereas the values for sensibility showed relevant variation (41%-78%). For this reason, the interobserver agreement score was weak. CBCT proved capable of evaluating the integrity of the cortical sinus (absence of oroantral communication) when it lies close to an apical periodontitis lesion. However, the low interobserver agreement reflects the difficulty in performing diagnoses when OAC is adjacent to a periapical lesion, using the acquisition protocol adopted in this research. This could be attributed to the high level of image noise.

Sinus floor bone failures in maxillary sinus floor augmentation: a case-control study.

BACKGROUND: Extreme bone resorption in posterior maxilla may lead to absence of part of the sinus floor. This phenomenon has been termed sinus floor bone failure, and may compromise sinus floor augmentation. PURPOSE: The present article aims to evaluate risk factors related to sinus floor bone failures and to evaluate the influence of these failures in sinus floor augmentation outcomes in patients with severely atrophic posterior maxilla. MATERIAL AND METHODS: In this case-control study, patients were selected among those referred for sinus floor augmentation. Only patients presenting a ridge bone height of less than 3 mm were included. Cases were defined as presenting sinus floor bone failure, whereas controls did not present any interruption in the sinus floor bone. Information collected included clinical dental records and computed tomographic assessment of sinus width, septa, and schneiderian membrane. Risk estimates for sinus floor bone failures were calculated as adjusted odds ratios (AORs) with 95% confidence intervals (CIs) using conditional logistic regression analyses. A p value under 0.05 was considered statistically significant. In addition, sinus floor augmentation outcomes of both groups were also assessed. RESULTS: In all, 23 cases and 58 controls were included in the study. Sinus floor bone failures were significantly associated with the number of missing posterior teeth (AOR 3.67; 95% CI 0.86 to 15.63; p = .046) and a history of periodontitis (AOR 6.39; 95% CI 1.86 to 21.95; p = .002). Of the total, 15 cases and 27 controls underwent sinus floor augmentation. Schneiderian membrane perforation occurred during the surgery of two cases and of one control. No implants were lost during a mean postsurgical follow-up of 20 months. CONCLUSION: The number of missing posterior teeth and a history of periodontitis may be considered as risk factors for sinus floor bone failures.

Detection of horizontal root fracture using four different protocols of cone-beam computed tomography

The purpose of this study was to analyze four different cone-beam computed tomography (CBCT) protocols to identify horizontal root fractures (HRF) in endodontically treated teeth, with or without the presence of a metallic post. Thirty extracted single-rooted human premolars were treated endodontically. Afterwards, an observer induced a horizontal fracture in 15 teeth. Each tooth was inserted in an empty mandibular socket and submitted to a computed tomography scan taken with and without the metallic post. The acquisition followed four different protocols, with different fields of view (FOV) and voxel sizes, as follows: FOV 6X16 cm/0.2 mm voxel; FOV 6X16 cm/0.25 mm voxel; FOV 8X8 cm/0.2 mm voxel; FOV 8X8 cm/0.25 mm voxel. Two observers checked all the acquisitions within a two-week interval, and the values of sensitivity, specificity, accuracy and kappa were calculated. The sensitivity, specificity and accuracy values were better for the 8X8 cm/0.2 mm and 16X6 cm/0.25 mm protocols, ranging from 0.60 to 0.86 and 0.53 to 0.80, respectively. The intra- and interobserver concordance ranged from 0.65 to 0.72. The protocols where FOV and voxel were proportional showed better results. The 8x8 cm/0.2 mm protocol had the least interference from the metallic artifact. All four protocols showed a decline in values in the presence of the metallic artifact.

CBCT-based evaluation of integrity of cortical sinus close to periapical lesions

The purpose of the present study was to test the applicability of cone beam computed tomography (CBCT) to evaluate the integrity of the cortical sinus close to periapical lesions. Two observers analyzed samples of 64 alveoli of first molar roots in macerated swine maxillas prepared with perchloric acid to simulate periapical lesions. The specimens were evaluated using CBCT (55-mm high and 100-mm diameter cylinder at 0.2-mm voxel resolution) for the presence of oroantral communication (OAC) caused by the simulated lesions. Sensitivity, specificity, and accuracy were calculated. Fair values were obtained for accuracy (66%-78%) and good values for specificity (70%-98%), whereas the values for sensibility showed relevant variation (41%-78%). For this reason, the interobserver agreement score was weak. CBCT proved capable of evaluating the integrity of the cortical sinus (absence of oroantral communication) when it lies close to an apical periodontitis lesion. However, the low interobserver agreement reflects the difficulty in performing diagnoses when OAC is adjacent to a periapical lesion, using the acquisition protocol adopted in this research. This could be attributed to the high level of image noise.

Congenital epulis with auto-resolution: case report / Epúlide congênita com auto-resolução: relato de caso

Congenital epulis is an uncommon benign lesion that affects the oral cavity of newborns, and presents histological features which are similar to those of granular cell tumor. The origin of this lesion has not been fully elucidated, and many hypotheses are considered due to the large variety of cell types observed in histological sections. Epulis development occurs further in the prenatal period, and is more common in newborn females, frequently in the maxilla. This lesion usually is presentend as a nodule covered by normal oral mucosa, which in some cases, interferes with baby's breathing and feeding. This report describes the case of a two-month-old male baby who presented a pedunculated intraoral lesion in the mandibular alveolar ridge. Histological sections revealed presence of mucosal fragments with atrophic squamous stratified epithelium, and fibrous connective tissue composed of cells with granular and eosinophilic cytoplasm. A few days after initial exam, the lesion detached from alveolar ridge, and healed spontaneously.

A epúlide congênita é uma lesão benigna rara que acomete a cavidade oral de recém-nascidos e apresenta características histológicas semelhantes às do tumor de células granulares. A origem da lesão ainda não foi completamente elucidada, e as muitas hipóteses a respeito de sua histogênese baseiam-se na grande variedade de tipos celulares observados nos cortes histológicos. A epúlide desenvolve-se ainda no período pré-natal, e é mais comum em recém-nascidos do sexo feminino, ocorrendo com mais freqüência na maxila. Esta lesão costuma apresentar-se como um nódulo coberto por mucosa oral normal que, em alguns casos, interfere na respiração e na alimentação do bebê. Esse artigo descreve o caso de um bebê do gênero masculino, leucoderma, de dois meses de idade, que apresentava lesão intra-oral pediculada com implantação débil na região alveolar da mandíbula. Cortes histológicos revelaram a presença de fragmento de mucosa revestido por epitélio pavimentoso estratificado atrófico, e de tecido conjuntivo fibroso composto de células com citoplasma granular e eosinofílico abundante. Alguns dias após o exame inicial, a lesão desprendeu-se do rebordo alveolar, sofrendo resolução espontânea.

Influence of cone-beam computed tomographic scan mode for detection of horizontal root fracture.

INTRODUCTION: The purpose of the present study was (1) to test the accuracy of a small-volume cone-beam computed tomographic (CBCT) device in detecting horizontal root fractures (HRFs) in teeth with and without an intracanal metallic post (IMP) and (2) to investigate the use of 2 different acquisition protocols of a CBCT device for HRF diagnosis. METHODS: Forty endodontically treated teeth with and without an IMP were examined using PreXion 3D CBCT scanner (Terarecon, San Mateo, CA) with a 5-cm high and 5-cm diameter cylinder at 0.10-mm voxel reconstruction. Two observers analyzed the samples to determine the presence and location of HRFs. RESULTS: Sensitivity values ranged from 0.40-0.80. The most favorable results were found for the samples with no IMP observed using the protocol of a higher number of x-ray projections (0.70-0.80). Accuracy in the groups with an IMP ranged from 75%-90% in the 1024 x-ray projection protocol (HI-HI group) versus 70%-85% for the same samples examined in the 512 x-ray projection protocol (HI-STD group). Intraobserver agreement ranged from relevant to perfect concordance for both protocols (HI-HI = Kappa: 0.60-1.00 and HI-STD = Kappa: 0.55-0.89). Interobserver agreement ranged from moderate to perfect concordance for both protocols (HI-HI = Kappa: 0.79-0.89 and HI-STD = Kappa: 0.42-0.76). CONCLUSIONS: Even though there are statistically significant differences for the protocol with the higher number of x-ray projections, we found high accuracy, sensitivity, sensibility, and intra- and interobserver agreement in detecting HRFs for both Prexion 3D protocols.

Accuracy and reliability of linear measurements using 3-dimensional computed tomographic imaging software for Le Fort I Osteotomy.

Our purpose was to compare the accuracy and reliability of linear measurements for Le Fort I osteotomy using volume rendering software. We studied 11 dried skulls and used cone-beam computed tomography (CT) to generate 3-dimensional images. Linear measurements were based on craniometric anatomical landmarks that were predefined as specifically used for Le Fort I osteotomy, and identified twice each by 2 radiologists, independently, using Dolphin imaging version 11.5.04.35. A third examiner then made physical measurements using digital calipers. There was a significant difference between Dolphin imaging and the gold standard, particularly in the pterygoid process. The largest difference was 1.85mm (LLpPtg L). The mean differences between the physical and the 3-dimensional linear measurements ranged from -0.01 to 1.12mm for examiner 1, and 0 to 1.85mm for examiner 2. Interexaminer analysis ranged from 0.51 to 0.93. Intraexaminer correlation coefficients ranged from 0.81 to 0.96 and 0.57 to 0.92, for examiners 1 and 2, respectively. We conclude that the Dolphin imaging should be used sparingly during Le Fort I osteotomy.