Disentangling Thermal from Electronic Contributions in the Spectral Response of Photoexcited Perovskite Materials.

Disentangling electronic and thermal effects in photoexcited perovskite materials is crucial for photovoltaic and optoelectronic applications but remains a challenge due to their intertwined nature in both the time and energy domains. In this study, we employed temperature-dependent variable-angle spectroscopic ellipsometry, density functional theory calculations, and broadband transient absorption spectroscopy spanning the visible to mid-to-deep-ultraviolet (UV) ranges on MAPbBr3 thin films. The use of deep-UV detection opens a new spectral window that enables the exploration of high-energy excitations at various symmetry points within the Brillouin zone, facilitating an understanding of the ultrafast responses of the UV bands and the underlying mechanisms governing them. Our investigation reveals that the photoinduced spectral features remarkably resemble those generated by pure lattice heating, and we disentangle the relative thermal and electronic contributions and their evolutions at different delay times using combinations of decay-associated spectra and temperature-induced differential absorption. The results demonstrate that the photoinduced transients possess a significant thermal origin and cannot be attributed solely to electronic effects. Following photoexcitation, as carriers (electrons and holes) transfer their energy to the lattice, the thermal contribution increases from ∼15% at 1 ps to ∼55% at 500 ps and subsequently decreases to ∼35-50% at 1 ns. These findings elucidate the intricate energy exchange between charge carriers and the lattice in photoexcited perovskite materials and provide insights into the limited utilization efficiency of photogenerated charge carriers.

Precise molecular sieving of ethylene from ethane using triptycene-derived submicroporous carbon membranes.

Replacement or debottlenecking of the extremely energy-intensive cryogenic distillation technology for the separation of ethylene from ethane has been a long-standing challenge. Membrane technology could be a desirable alternative with potentially lower energy consumption. However, the current key obstacle for industrial implementation of membrane technology is the low mixed-gas selectivity of polymeric, inorganic or hybrid membrane materials, arising from the similar sizes of ethylene (3.75 Å) and ethane (3.85 Å). Here we report precise molecular sieving and plasticization-resistant carbon membranes made by pyrolysing a shape-persistent three-dimensional triptycene-based ladder polymer of intrinsic microporosity with unparalleled mixed-gas performance for ethylene/ethane separation, with a selectivity of ~100 at 10 bar feed pressure, and with long-term continuous stability for 30 days demonstrated. These submicroporous carbon membranes offer opportunities for membrane technology in a wide range of notoriously difficult separation applications in the petrochemical and natural gas industry.

Phonon-driven transient bandgap renormalization in perovskite single crystals.

Tailoring the electronic structure of perovskite materials on ultrafast timescales is expected to shed light on optimizing optoelectronic applications. However, the transient bandgap renormalization observed upon photoexcitation is commonly explained by many-body interactions of optically created electrons and holes, which shrink the original bandgap by a few tens of millielectronvolts with a sub-picosecond time constant, while the accompanying phonon-induced effect remains hitherto unexplored. Here we unravel a significant contribution of hot phonons in the photo-induced transient bandgap renormalization in MAPbBr3 single crystals, as evidenced by asymmetric spectral evolutions and transient reflection spectral shifts in the picosecond timescale. Moreover, we performed a spatiotemporal study upon optical excitation with time-resolved scanning electron microscopy and identified that the surface charge carrier diffusion and transient bandgap renormalization are strongly correlated in time. These findings highlight the need to re-evaluate current theories on photo-induced bandgap renormalization and provide a new approach for precisely controlling the optical and electronic properties of perovskite materials, enabling the design and fabrication of high-performance optoelectronic devices with exceptional efficiency and unique properties.

Fast water transport and molecular sieving through ultrathin ordered conjugated-polymer-framework membranes.

The development of membranes that block solutes while allowing rapid water transport is of great importance. The microstructure of the membrane needs to be rationally designed at the molecular level to achieve precise molecular sieving and high water flux simultaneously. We report the design and fabrication of ultrathin, ordered conjugated-polymer-framework (CPF) films with thicknesses down to 1 nm via chemical vapour deposition and their performance as separation membranes. Our CPF membranes inherently have regular rhombic sub-nanometre (10.3 × 3.7 Å) channels, unlike membranes made of carbon nanotubes or graphene, whose separation performance depends on the alignment or stacking of materials. The optimized membrane exhibited a high water/NaCl selectivity of ∼6,900 and water permeance of ∼112 mol m-2 h-1 bar-1, and salt rejection >99.5% in high-salinity mixed-ion separations driven by osmotic pressure. Molecular dynamics simulations revealed that water molecules quickly and collectively pass through the membrane by forming a continuous three-dimensional network within the hydrophobic channels. The advent of ordered CPF provides a route towards developing carbon-based membranes for precise molecular separation.

Efficient and simultaneous capture of iodine and methyl iodide achieved by a covalent organic framework.

Radioactive molecular iodine (I2) and organic iodides, mainly methyl iodide (CH3I), coexist in the off-gas stream of nuclear power plants at low concentrations, whereas few adsorbents can effectively adsorb low-concentration I2 and CH3I simultaneously. Here we demonstrate that the I2 adsorption can occur on various adsorptive sites and be promoted through intermolecular interactions. The CH3I adsorption capacity is positively correlated with the content of strong binding sites but is unrelated to the textural properties of the adsorbent. These insights allow us to design a covalent organic framework to simultaneously capture I2 and CH3I at low concentrations. The developed material, COF-TAPT, combines high crystallinity, a large surface area, and abundant nucleophilic groups and exhibits a record-high static CH3I adsorption capacity (1.53 g·g-1 at 25 °C). In the dynamic mixed-gas adsorption with 150 ppm of I2 and 50 ppm of CH3I, COF-TAPT presents an excellent total iodine capture capacity (1.51 g·g-1), surpassing various benchmark adsorbents. This work deepens the understanding of I2/CH3I adsorption mechanisms, providing guidance for the development of novel adsorbents for related applications.

Hydrocarbon ladder polymers with ultrahigh permselectivity for membrane gas separations.

Membranes have the potential to substantially reduce energy consumption of industrial chemical separations, but their implementation has been limited owing to a performance upper bound-the trade-off between permeability and selectivity. Although recent developments of highly permeable polymer membranes have advanced the upper bounds for various gas pairs, these polymers typically exhibit limited selectivity. We report a class of hydrocarbon ladder polymers that can achieve both high selectivity and high permeability in membrane separations for many industrially relevant gas mixtures. Additionally, their corresponding films exhibit desirable mechanical and thermal properties. Tuning of the ladder polymer backbone configuration was found to have a profound effect on separation performance and aging behavior.

In Situ Derived Hybrid Carbon Molecular Sieve Membranes with Tailored Ultramicroporosity for Efficient Gas Separation.

Fine control of ultramicroporosity (<7 Å) in carbon molecular sieve (CMS) membranes is highly desirable for challenging gas separation processes. Here, a versatile approach is proposed to fabricate hybrid CMS (HCMS) membranes with unique textural properties as well as tunable ultramicroporosity. The HCMS membranes are formed by pyrolysis of a polymer nanocomposite precursor containing metal-organic frameworks (MOFs) as a carbonizable nanoporous filler. The MOF-derived carbonaceous phase displays good compatibility with the polymer-derived carbon matrix due to the homogeneity of the two carbon phases, substantially enhancing the mechanical robustness of the resultant HCMS membranes. Detailed structural analyses reveal that the in situ pyrolysis of embedded MOFs induces more densified and interconnected carbon structures in HCMS membranes compared to those in conventional CMS membranes, leading to bimodal and narrow pore size distributions in the ultramicroporous region. Eventually, the HCMS membranes exhibit far superior gas separation performances with a strong size-sieving ability than the conventional polymers and CMS membranes, especially for closely sized gas pairs (Δd < 0.5 Å) including CO2 /CH4 and C3 H6 /C3 H8 separations. More importantly, the developed HCMS material is successfully prepared into a thin-film composite (TFC) membrane (≈1 µm), demonstrating its practical feasibility for use in industrial mixed-gas operation conditions.

Ionic Functionalization of Multivariate Covalent Organic Frameworks to Achieve an Exceptionally High Iodine-Capture Capacity.

Adsorption-based iodine (I2 ) capture has great potential for the treatment of radioactive nuclear waste. In this study, we apply a "multivariate" synthetic strategy to construct ionic covalent organic frameworks (iCOFs) with a large surface area, high pore volume, and abundant binding sites for I2 capture. The optimized material iCOF-AB-50 exhibits a static I2 uptake capacity of 10.21 g g-1 at 75 °C and a dynamic uptake capacity of 2.79 g g-1 at ≈400 ppm I2 and 25 °C, far exceeding the performances of previously reported adsorbents under similar conditions. iCOF-AB-50 also exhibits fast adsorption kinetics, good moisture tolerance, and full reusability. The promoting effect of ionic groups on I2 adsorption has been elucidated by experimentally identifying the iodine species adsorbed at different sites and calculating their binding energies. This work demonstrates the essential role of balancing the textural properties and binding sites of the adsorbent in achieving a high I2 capture performance.

Nano-Confinement Effects on Structural Development and Organic Solvent-Induced Swelling of Ultrathin Carbon Molecular Sieve Films.

Successful implementation of carbon molecular sieve (CMS) membranes in large scale chemical processes inevitably relies on fabrication of high performance integrally skinned asymmetric or thin-film composite membranes. In principle, to maximize separation efficiency the selective CMS layer should be as thin as possible which requires its lateral confinement to a supporting structure. In this work, we studied pyrolysis-induced structural development as well as ethanol vapor-induced swelling of ultrathin CMS films made from a highly aromatic polyimide of an intrinsic microporosity (PIM-PI) precursor. Utilization of a light polarization-sensitive technique, spectroscopic ellipsometry, allowed for the identification of an internal orientation within the turbostratic amorphous CMS structure driven by the laterally constraining support. Our results indicated a significant thickness dependence both in the extent of pyrolytic collapse and response to organic vapor penetrant. Thinner, substrate-confined films (∼30 nm) collapsed more extensively leading to a reduction of microporosity in comparison to their thicker (∼300 nm) as well as self-supported (∼70 µm) counterparts. The reduced microporosity in the thinner films induced changes in the balance between penetrant-induced dilation (swelling) and filling of micropores. In comparison to thicker films, the initial lower microporosity of the thinner films was accompanied by slightly enhanced organic vapor-induced swelling. The presented results are anticipated to generate the fundamental knowledge necessary to design optimized ultrathin CMS membranes. In particular, our results reinforce previous findings that excessive reduction of the selective layer thickness in amorphous microporous materials (such as PIMs or CMS) beyond several hundred nanometers may not be optimal for maximizing their fluid transport performance.

Defect Engineering in Metal-Organic Frameworks Towards Advanced Mixed Matrix Membranes for Efficient Propylene/Propane Separation.

Highly permselective and durable membrane materials have been sought for energy-efficient C3 H6 /C3 H8 separation. Mixed-matrix membranes (MMMs) comprising a polymer matrix and metal-organic frameworks (MOFs) are promising candidates for this application; however, rational matching of filler-matrix is challenging and their separation performances need to be further improved. Here, we propose a novel strategy of "defect engineering" in MOFs as an additional degree of freedom to design advanced MMMs. MMMs incorporated with defect-engineered MOFs exhibit exceptionally high C3 H6 permeability and maintained C3 H6 /C3 H8 selectivity, especially with enhanced stability under industrial mixed-gas conditions. The gas transport, sorption, and material characterizations reveal that the defect sites in MOFs provide the resulting MMMs with not only ultrafast diffusion pathways but also favorable C3 H6 sorption by forming complexation with unsaturated open metal sites, confirmed by in situ FT-IR studies. Most importantly, the concept is also valid for different polymer matrices and gas pairs, demonstrating its versatile potential in other fields.

Finely Tuned Submicroporous Thin-Film Molecular Sieve Membranes for Highly Efficient Fluid Separations.

Polymeric membranes with increasingly high permselective performances are gaining a significant role in lowering the energy burden and improving the environmental sustainability of complex chemical separations. However, the commercial deployment of newly designed materials with promising intrinsic properties for fluid separations has been stalled by challenges associated with fabrication and scale up of low-cost, high-performance, defect-free thin-film composite (TFC) membranes. Here, a facile method to fabricate next-generation TFC membranes using a bridged-bicyclic triptycene tetra-acyl chloride (Trip) building block with a large fraction of finely tuned structural submicroporosity (pore size < 4 Å) is demonstrated. The TFCs exhibit superb potential for removal of small (≈200 g mol-1 ) organic microcontaminants from organic solvent streams by showing both improved rejection and permeance in organic systems compared to current state-of-the-art commercial membranes. The TFCs also display unprecedented properties for desalination applications with performance located far above the current water permeance/sodium chloride rejection trendline. The strategy of using highly contorted triptycene building blocks with well-defined interconnected internal free volume elements establishes a scalable, generalized approach to fabricate highly selective, submicroporous TFC membranes for a wide variety of challenging energy-intensive fluid separations.

Facile Synthesis and Study of Microporous Catalytic Arene-Norbornene Annulation-Tröger's Base Ladder Polymers for Membrane Air Separation.

We report the facile synthesis and study of two soluble microporous ladder polymers, CANAL-TBs, by combining catalytic arene-norbornene annulation (CANAL) and Tröger's base (TB) formation. The polymers were synthesized in two steps from commercially available chemicals in high yields. CANAL-TBs easily formed mechanically robust films, were thermally stable up to 440 °C, and exhibited very high Brunauer-Teller-Emmett surface areas of 900-1000 m2 g-1. The gas separation performance of the CANAL-TBs for the O2/N2 pair is located between the 2008 and 2015 permeability/selectivity upper bounds. After 300 days of aging, CANAL-TBs still exhibited O2 permeability of 200-500 barrer with O2/N2 selectivity of about 5. The polymer with more methyl substituents exhibited higher permeability and slightly larger intersegmental spacing as revealed by WAXS, presumably due to more frustrated chain packing. The facile synthesis, excellent mechanical properties, and promising air separation performance of the CANAL-TB polymers make them attractive membrane materials for various air separation applications, such as aircraft on-board nitrogen generation and oxygen enrichment for combustion.

Thin Composite Carbon Molecular Sieve Membranes from a Polymer of Intrinsic Microporosity Precursor.

Ultra-thin composite carbon molecular sieve (CMS) membranes were fabricated on well-defined inorganic alumina substrates using a polymer of intrinsic microporosity (PIM) as a precursor. Details of the pyrolysis-related structural development were elucidated using focused-beam, interference-enhanced spectroscopic ellipsometry (both in the UV-vis and IR range), which allowed accurate determination of the film thickness, optical properties as well as following the chemical transformations. The pyrolysis-induced collapse of thin and bulk PIM-derived CMS membranes was compared with CMS made from a well-known non-PIM precursor 6FDA-DABA. Significant differences between the PIM and non-PIM precursors were discovered and explained by a much larger possible volume contraction in the PIM. In spite of the differences, surprisingly, the gas separation properties did not fundamentally differ. The high-temperature collapse of the initially amorphous and isotropic precursor structure was accompanied by a significant molecular orientation within the formed turbostratic carbon network guided by the laterally constraining presence of the substrate. This manifested itself in the development of uniaxial optical anisotropy, which was shown to correlate with increases in gas separation selectivity for multiple technologically important gas pairs. Reduction of CMS skin thickness significantly below ∼1 µm induced large losses in permeability coefficients with only small to moderate effects on selectivity. Remarkably, skin thickness reduction and physical aging seemed to superimpose onto the same trend, which explains and strengthens some of the earlier fundamental insights.

Ultraselective glassy polymer membranes with unprecedented performance for energy-efficient sour gas separation.

Membrane-based separation of combined acid gases carbon dioxide and hydrogen sulfide from natural gas streams has attracted increasing academic and commercial interest. These feeds are referred to as "sour," and herein, we report an ultra H2S-selective and exceptionally permeable glassy amidoxime-functionalized polymer of intrinsic microporosity for membrane-based separation. A ternary feed mixture (with 20% H2S:20% CO2:60% CH4) was used to demonstrate that a glassy amidoxime-functionalized membrane provides unprecedented separation performance under challenging feed pressures up to 77 bar. These membranes show extraordinary H2S/CH4 selectivity up to 75 with ultrahigh H2S permeability >4000 Barrers, two to three orders of magnitude higher than commercially available glassy polymeric membranes. We demonstrate that the postsynthesis functionalization of hyper-rigid polymers with appropriate functional polar groups provides a unique design strategy for achieving ultraselective and highly permeable membrane materials for practical natural gas sweetening and additional challenging gas pair separations.

Synthesis and Gas-Permeation Characterization of a Novel High-Surface Area Polyamide Derived from 1,3,6,8-Tetramethyl-2,7-diaminotriptycene: Towards Polyamides of Intrinsic Microporosity (PIM-PAs).

A triptycene-based diamine, 1,3,6,8-tetramethyl-2,7-diamino-triptycene (TMDAT), was used for the synthesis of a novel solution-processable polyamide obtained via polycondensation reaction with 4,4'-(hexafluoroisopropylidene)bis(benzoic acid) (6FBBA). Molecular simulations confirmed that the tetrasubstitution with ortho-methyl groups in the triptycene building block reduced rotations around the C⁻N bond of the amide group leading to enhanced fractional free volume. Based on N2 sorption at 77 K, 6FBBA-TMDAT revealed microporosity with a Brunauer⁻Emmett⁻Teller (BET) surface area of 396 m² g-1; to date, this is the highest value reported for a linear polyamide. The aged 6FBBA-TMDAT sample showed moderate pure-gas permeabilities (e.g., 198 barrer for H2, ~109 for CO2, and ~25 for O2) and permselectivities (e.g., αH2/CH4 of ~50) that position this polyamide close to the 2008 H2/CH4 and H2/N2 upper bounds. CO2⁻CH4 mixed-gas permeability experiments at 35 °C demonstrated poor plasticization resistance; mixed-gas permselectivity negatively deviated from the pure-gas values likely, due to the enhancement of CH4 diffusion induced by mixing effects.

Experimental Mixed-Gas Permeability, Sorption and Diffusion of CO2-CH4 Mixtures in 6FDA-mPDA Polyimide Membrane: Unveiling the Effect of Competitive Sorption on Permeability Selectivity.

The nonideal behavior of polymeric membranes during separation of gas mixtures can be quantified via the solution-diffusion theory from experimental mixed-gas solubility and permeability coefficients. In this study, CO2-CH4 mixtures were sorbed at 35 °C in 4,4'-(hexafluoroisopropylidene)diphthalic dianhydride (6FDA)-m-phenylenediamine (mPDA)-a polyimide of remarkable performance. The existence of a linear trend for all data of mixed-gas CO2 versus CH4 solubility coefficients-regardless of mixture concentration-was observed for 6FDA-mPDA and other polymeric films; the slope of this trend was identified as the ratio of gas solubilities at infinite dilution. The CO2/CH4 mixed-gas solubility selectivity of 6FDA-mPDA and previously reported polymers was higher than the equimolar pure-gas value and increased with pressure from the infinite dilution value. The analysis of CO2-CH4 mixed-gas concentration-averaged effective diffusion coefficients of equimolar feeds showed that CO2 diffusivity was not affected by CH4. Our data indicate that the decrease of CO2/CH4 mixed-gas diffusion, and permeability selectivity from the pure-gas values, resulted from an increase in the methane diffusion coefficient in mixtures. This effect was the result of an alteration of the size sieving properties of 6FDA-mPDA as a consequence of CO2 presence in the 6FDA-mPDA film matrix.

High-Pressure CO2 Sorption in Polymers of Intrinsic Microporosity under Ultrathin Film Confinement.

Ultrathin microporous polymer films are pertinent to the development and further spread of nanotechnology with very promising potential applications in molecular separations, sensors, catalysis, or batteries. Here, we report high-pressure CO2 sorption in ultrathin films of several chemically different polymers of intrinsic microporosity (PIMs), including the prototypical PIM-1. Films with thicknesses down to 7 nm were studied using interference-enhanced in situ spectroscopic ellipsometry. It was found that all PIMs swell much more than non-microporous polystyrene and other high-performance glassy polymers reported previously. Furthermore, chemical modifications of the parent PIM-1 strongly affected the swelling magnitude. By investigating the behavior of relative refractive index, nrel, it was possible to study the interplay between micropores filling and matrix expansion. Remarkably, all studied PIMs showed a maximum in nrel at swelling of 2-2.5% indicating a threshold point above which the dissolution in the dense matrix started to dominate over sorption in the micropores. At pressures above 25 bar, all PIMs significantly plasticized in compressed CO2 and for the ones with the highest affinity to the penetrant, a liquidlike mixing typical for rubbery polymers was observed. Reduction of film thickness below 100 nm revealed pronounced nanoconfinement effects and resulted in a large swelling enhancement and a quick loss of the ultrarigid character. On the basis of the partial molar volumes of the dissolved CO2, the effective reduction of the Tg was estimated to be ∼200 °C going from 128 to 7 nm films.

Pristine and Carboxyl-Functionalized Tetraphenylethylene-Based Ladder Networks for Gas Separation and Volatile Organic Vapor Adsorption.

A novel tetraphenylethylene-based ladder network (MP1) made by polycondensation reaction from 4,4',4″,4‴-(ethene-1,1,2,2-tetrayl)tetrakis(benzene-1,2-diol) and 2,3,5,6-tetrafluoroterephthalonitrile and its COOH-functionalized analogue (MP2) were synthesized for the first time. Their structures were confirmed by solid-state nuclear magnetic resonance (13C cross-polarization magic angle spinning), Fourier transform infrared spectroscopy, and elementary analysis. MP1 exhibited a high Brunauer-Emmett-Teller surface area (1020 m2 g-1), whereas the COOH-functionalized MP2 showed a much smaller surface area (150 m2 g-1) but displayed a more uniform pore size distribution. Because of the high density of nitrile groups in the network polymers of intrinsic microporosity (PIMs) and strong interaction with quadrupole CO2 molecules, MP1 exhibited a high CO2 adsorption capacity of 4.2 mmol g-1 at 273 K, combined with an isosteric heat of adsorption (Q st) of 29.6 kJ mol-1. The COOH-functionalized MP2 showed higher Q st of 34.2 kJ mol-1 coupled with a modest CO2 adsorption capacity of 2.2 mmol g-1. Both network PIMs displayed high theoretical ideal adsorbed solution theory CO2/N2 selectivities (51 and 94 at 273 K vs 34 and 84 at 298 K for MP1 and MP2, respectively). The high selectivities of MP1 and MP2 were confirmed by experimental column breakthrough experiments with CO2/N2 selectivity values of 23 and 45, respectively. Besides the promising CO2 capture and CO2/N2 selectivity properties, MP1 also demonstrated high sorption capacity for toxic volatile organic vapors. At 298 K and a relative pressure of 0.95, benzene and toluene sorption uptakes reached 765 and 1041 mg g-1, respectively. Moreover, MP1 also demonstrated some potential for adsorptive separation of xylene isomers with adsorptive selectivity of 1.75 for m-xylene/o-xylene.

Structural, Thermal, and Gas-Transport Properties of Fe3+ Ion-Exchanged Nafion Membranes.

The physical and gas-transport properties of Fe3+ cross-linked Nafion membranes were examined. Wide-angle X-ray diffraction results revealed a lower crystallinity for Nafion Fe3+ but showed essentially no changes in the average chain spacing upon cation exchange of Nafion H+. Raman and Fourier transform infrared spectroscopy techniques qualitatively measured the strength of the ionic bond between the Fe3+ cations and sulfonate anions. Thermal gravimetric analysis indicated that the incorporation of Fe3+ adversely affected the thermal stability of Nafion due to the catalytic decomposition of perfluoroalkylether side chains. Gas sorption isotherms of Nafion Fe3+ measured at 35 °C up to 20 atm exhibited a linear sorption uptake for O2, N2, and CH4 following Henry's law and slight concave behavior for CO2. Pure-gas permeation results showed reduced gas permeability but higher permselectivities compared to Nafion H+ with αN2/CH4 = 4.0, αCO2/CH4 = 35, and αHe/CH4 = 733 attributable to the strong physical cross-linking effect of Fe3+ that caused chain stiffening with enhanced size-sieving behavior. Gas mixture permeation experiments using 1:1 molar CO2/CH4 feed demonstrated reduced CO2 plasticization for Nafion Fe3+. At 10 atm CO2 partial pressure, CO2/CH4 selectivity decreased to 28 from the pure-gas value of 35, which was a significant improvement compared to the performance of a Nafion H+ membrane.

Synthesis of Highly Gas-Permeable Polyimides of Intrinsic Microporosity Derived from 1,3,6,8-Tetramethyl-2,7-diaminotriptycene.

A simple synthetic route to a novel sterically hindered triptycene-based diamine, 1,3,6,8-tetramethyl-2,7-diaminotriptycene (TMDAT), and its use in the preparation of high molecular weight polyimides of intrinsic microporosity (PIM-PIs) are reported. The organosoluble TMDAT-derived polyimides displayed high Brunauer-Emmett-Teller surface areas ranging between 610 and 850 m2 g-1 and demonstrated excellent thermal stability of up to 510 °C. Introduction of the rigid three-dimensional paddlewheel triptycene framework and the tetramethyl-induced restriction of the imide bond rotation resulted in highly permeable polyimides with moderate gas-pair selectivity. The best performing polyimide made from TMDAT and a triptycene-based dianhydride showed gas transport properties located between the 2008 and 2015 polymer permeability/selectivity trade-off curves with H2 and O2 permeabilities of 2858 and 575 barrer combined with H2/N2 and O2/N2 selectivities of 24 and 4.8, respectively, after 200 days of physical aging.