ABSTRACT
Semen availability in ram semen processing facilities is of great importance for the genetic improvement of sheep. Accordingly, any method that would increase sperm viability in low viability ejaculates could be useful. In this study, the possibility of a glass beads filtration method by estimating the beads total surface provided (TSP) for adhesion of spermatozoa, was evaluated. Initially, two different TSP (102 and 154 cm(2)) achieved by various sizes of beads (1500, 2000 and 3000 microm) were tested and no significant difference in sperm viability improvement was noticed for the same TSP by different beads (p > 0.05). Next optimization tests were performed in which three different funnels were used for filtration at a standard TSP (154 cm(2)). The pear-shaped funnel was found to be the most appropriate for filtration, as semen volume recovery and sperm viability improvement were more pronounced (p < 0.05). Finally, filtration tests were conducted with pear-shaped funnels with different TSP (102 and 154 cm(2)) obtained by the aforementioned beads sizes (1500, 2000 and 3000 microm) in equal aliquots. Total surface provided of 102 cm(2) proved to be the more appropriate for filtration than 154 cm(2), as shown by the significant improvement of sperm viability (p < 0.01) and the significantly higher filtrate semen volume (p < 0.05). In conclusion, ram sperm viability improvement by more than 20% of its initial value and semen volume recovery by more than 60%, along with the fact that the total filtration time did not exceed 6 min in any case, suggest that through further development this method could be successfully used during ram semen processing.
