Photocatalysis and catalytic wet air oxidation: Degradation and toxicity of bisphenol A containing wastewaters.

Bisphenol A (BPA) is a commonly used chemical in consumer products. It is an endocrine disrupter that has potentially significant negative effects on human health. The use and chemical stability of BPA have resulted in the appearance of the chemical in wastewaters. Since the current wastewater treatment technologies are not effective enough to remove BPA, new methods to degrade BPA are required. In this paper, we report the efforts made towards developing a bi-functional catalyst for consecutive catalytic wet air oxidation-photocatalytic water treatment. It was found that 2.5% Pt/Ti0.8Ce0.2O2 is a potential bi-functional catalyst for the consecutive treatment. Concentration and toxicity of BPA were successfully reduced by catalytic wet air oxidation. Although BPA was further reduced by photocatalysis, it was not reflected in further decrease of cell toxicity. Thus wet-air oxidation combined with photocatalysis is a promising approach for the reduction of BPA.

Toward new benchmark adsorbents: preparation and characterization of activated carbon from argan nut shell for bisphenol A removal.

The use of argan nut shell as a precursor for producing activated carbon was investigated in this work. Two activated carbons AC-HP and AC-Na were prepared from argan nut shell by chemical activation method using phosphoric acid (H3PO4) and sodium hydroxide (NaOH), respectively. Textural, morphological, and surface chemistry characteristics were studied by nitrogen physisorption, TGA, SEM, TXRF, FTIR, XRD, and by determining the pHPZC of the AC-HP. The adsorption experiments revealed that AC-HP was more efficient in adsorption of BPA due to high specific surface area (1372 m2/g) compared to AC-Na (798 m2/g). The obtained adsorption data of BPA on AC-HP correlated well with the pseudo-second-order model and the Langmuir isotherm (Qmax = 1250 mg/g at 293 K). The thermodynamic parameters (ΔG° < 0, ΔH° < 0, and ΔS° < 0) indicate that adsorption of BPA on AC-HP was spontaneous and exothermic in nature. The regeneration of AC-HP showed excellent results after 5 cycles (95-93%). This work does not only provide a potential way to use argan nut shell but also represents a sustainable approach to synthesize AC-HP, which might be an ideal material for various applications (energy storage, catalysis, and environmental remediation).

Removal of aqueous As(III) and As(V) by hydrous titanium dioxide.

Dissolved arsenic in drinking water is a global concern as it causes serious health problems. The purpose of this research was to study the applicability of an industrial intermediate product, a mixture of titanium hydroxide and titanium dioxide for removing aqueous arsenic. The material is common, inexpensive, and non-toxic, making it an attractive choice for drinking water purification. The kinetics and equilibrium of removing both primary inorganic arsenic forms, As(III) and As(V), were studied by separate batch experiments. The tested material functioned well in removing both of these arsenic forms. The apparent values for Langmuir monolayer sorption capacities were 31.8 mg/g for As(III) and 33.4 mg/g for As(V) at pH 4. The studied TiO(2) performed the best in acidic conditions, but also reasonably well in other pH conditions.