Mapping the Nanoscale Heterogeneous Responses in the Dynamic Acceleration of Deformed Polymer Glasses.

Understanding the evolution of local structure and mobility of disordered glassy materials induced by external stress is critical in modeling their mechanical deformation in the nonlinear regime. Several techniques have shown acceleration of molecular mobility of various amorphous glasses under macroscopic tensile deformation, but it remains a major challenge to visualize such a relationship at the nanoscale. Here, we employ a new approach based on atomic force microscopy in nanorheology mode for quantifying the local dynamic responses of a polymer glass induced by nanoscale compression. By increasing the compression level from linear elastic to plastic deformation, we observe an increase in the mechanical loss tangent (tan δ), evidencing the enhancement of polymer mobility induced by large stress. Notably, tan δ images directly reveal the preferential effect of the large compression on the dynamic acceleration of nanoscale heterogeneities with initially slow mobility, which is clearly different from that induced by increasing temperature.

Torsional force microscopy of van der Waals moirés and atomic lattices.

In a stack of atomically thin van der Waals layers, introducing interlayer twist creates a moiré superlattice whose period is a function of twist angle. Changes in that twist angle of even hundredths of a degree can dramatically transform the system's electronic properties. Setting a precise and uniform twist angle for a stack remains difficult; hence, determining that twist angle and mapping its spatial variation is very important. Techniques have emerged to do this by imaging the moiré, but most of these require sophisticated infrastructure, time-consuming sample preparation beyond stack synthesis, or both. In this work, we show that torsional force microscopy (TFM), a scanning probe technique sensitive to dynamic friction, can reveal surface and shallow subsurface structure of van der Waals stacks on multiple length scales: the moirés formed between bi-layers of graphene and between graphene and hexagonal boron nitride (hBN) and also the atomic crystal lattices of graphene and hBN. In TFM, torsional motion of an Atomic Force Microscope (AFM) cantilever is monitored as it is actively driven at a torsional resonance while a feedback loop maintains contact at a set force with the sample surface. TFM works at room temperature in air, with no need for an electrical bias between the tip and the sample, making it applicable to a wide array of samples. It should enable determination of precise structural information including twist angles and strain in moiré superlattices and crystallographic orientation of van der Waals flakes to support predictable moiré heterostructure fabrication.

Insights into Mechanical Dynamics of Nanoscale Interfaces in Epoxy Composites Using Nanorheology Atomic Force Microscopy.

Interfacial polymer layers with nanoscale size play critical roles in dissipating the strain energy around cracks and defects in structural nanocomposites, thereby enhancing the material's fracture toughness. However, understanding how the intrinsic mechanical dynamics of the interfacial layer determine the toughening and reinforcement mechanisms in various polymer nanocomposites remains a major challenge. Here, by means of a recently developed nanorheology atomic force microscopy method, also known as nanoscale dynamic mechanical analysis (nDMA), we report direct mapping of dynamic mechanical responses at the interface of a model epoxy nanocomposite under the transition from a glassy to a rubbery state. We demonstrate a significant deviation in the dynamic moduli of the interface from matrix behavior. Interestingly, the sign of the deviation is observed to be reversed when the polymer changes from a glassy to a rubbery state, which provides an excellent explanation for the difference in the modulus reinforcement between glassy and rubbery epoxy nanocomposites. More importantly, nDMA loss tangent images unambiguously show an enhanced viscoelastic response at the interface compared to the bulk matrix in the glassy state. This observation can therefore provide important insights into the nanoscale toughening mechanism that occurs in epoxy nanocomposites due to viscoelastic energy dissipation at the interface.

Controlled Porosity in Ferroelectric BaTiO3 Photoanodes.

The use of ferroelectric polarization to promote electron-hole separation has emerged as a promising strategy to improve photocatalytic activity. Although ferroelectric thin films with planar geometry have been largely studied, nanostructured and porous ferroelectric thin films have not been commonly used in photo-electrocatalysis. The inclusion of porosity in ferroelectric thin films would enhance the surface area and reactivity, leading to a potential improvement of the photoelectrochemical (PEC) performance. Herein, the preparation of porous barium titanate (pBTO) thin films by a soft template-assisted sol-gel method is reported, and the control of porosity using different organic/inorganic ratios is verified by the combination of scanning electron microscopy and ellipsometry techniques. Using piezoresponse force microscopy, the switching of ferroelectric domains in pBTO thin films is observed, confirming that the ferroelectric polarization is still retained in the porous structures. In addition, the presence of porosity in pBTO thin films leads to a clear improvement of the PEC response. By electrochemical poling, we also demonstrated the tuning of the PEC performance of pBTO thin films via ferroelectric polarization. Our work offers a simple and low-cost approach to control the morphology optimization of ferroelectric thin films, which could open up the development of materials with great potential for PEC applications.

Nanoscale mechanics by tomographic contact resonance atomic force microscopy.

We report on quantifiable depth-dependent contact resonance AFM (CR-AFM) measurements over polystyrene-polypropylene (PS-PP) blends to detail surface and sub-surface features in terms of elastic modulus and mechanical dissipation. The depth-dependences of the measured parameters were analyzed to generate cross-sectional images of tomographic reconstructions. Through a suitable normalization of the measured contact stiffness and indentation depth, the depth-dependence of the contact stiffness was analyzed by linear fits to obtain the elastic moduli of the materials probed. Besides elastic moduli, the contributions of adhesive forces (short-range versus long-range) to contact on each material were determined without a priori assumptions. The adhesion analysis was complemented by an unambiguous identification of distinct viscous responses during adhesion and in-contact deformation from the dissipated power during indentation.

Single molecule transcription profiling with AFM.

Established techniques for global gene expression profiling, such as microarrays, face fundamental sensitivity constraints. Due to greatly increasing interest in examining minute samples from micro-dissected tissues, including single cells, unorthodox approaches, including molecular nanotechnologies, are being explored in this application. Here, we examine the use of single molecule, ordered restriction mapping, combined with AFM, to measure gene transcription levels from very low abundance samples. We frame the problem mathematically, using coding theory, and present an analysis of the critical error sources that may serve as a guide to designing future studies. We follow with experiments detailing the construction of high density, single molecule, ordered restriction maps from plasmids and from cDNA molecules, using two different enzymes, a result not previously reported. We discuss these results in the context of our calculations.