New Method toward a Robust Covalently Attached Cross-Linked Nanofiltration Membrane.

As nanofiltration applications increase in diversity, there is a need for new fabrication methods to prepare chemically and thermally stable membranes with high retention performance. In this work, thio-bromo "click" chemistry was adapted for the fabrication of a robust covalently attached and ultrathin nanofiltration membrane. The selective layer was formed on a pre-functionalized porous ceramic surface via a novel, liquid-vapor interfacial polymerization method. Compared to the most common conventional interfacial polymerization procedure, no harmful solvents and a minimal amount of reagents were used. The properties of the membrane selective layer and its free-standing equivalent were characterized by complementary physicochemical analysis. The stability of the thin selective layer was established in water, ethanol, non-polar solvents, and up to 150 °C. The potential as a nanofiltration membrane was confirmed through solvent permeability tests (water, ethanol, hexane, and toluene), PEG-in-water molecular weight cut-off measurements (≈700 g mol-1), and dye retention measurements.

New Generation of Mesoporous Silica Membranes Prepared by a Stöber-Solution Pore-Growth Approach.

Membranes consisting of uniform and vertically organized mesopores are promising systems for molecular filtration because of the possibility to combine high-flux and high-rejection properties. In this work, a new generation of mesoporous silica membranes (MSMs) have been developed, in which an organized mesoporous layer is directly formed on top of a porous ceramic support via a Stöber-solution pore-growth approach. Relevant characterization methods have been used to demonstrate the growth of the membrane separation layer and the effect of reaction time and the concentration of the reactants on the microstructure of the membrane. Compared to previous studies using the evaporation-induced self-assembly method to prepare MSMs, an important increase in water permeability was observed (from 1.0 to at least 3.8 L m-2 h-1 bar-1), indicating an improved pore alignment. The water permeability, cyclohexane permporometry tests, and molecular cut-off measurements (MWCO ≈ 2300 Da) were consistent with membranes composed of 2-3 nm accessible pores.