ABSTRACT
Thermal treatment of a 0.52SiO2-0.24SrO-0.24-xNa2O-xMO glass-ceramic series (where x = 0.08 and MO = Y2O3 or CeO2) was conducted in order to synthesize yttrium (Y3+) and cerium (Ce3+) crystalline species that may act as radical oxygen specie (ROS) scavengers. The prominent phase for the Control is a sodium-strontium-silicate while the experimental glass-ceramics (HY, YCe, and HCe) present sodium-Y/Ce-silicate and oxide phases. Disk shrinkage during thermal processing ranges from 1-7% for Control, HY, YCe, and HCe in both diameter and thickness. Solubility studies determined that the release of Si4+ and Na+ are greatest from the Control disks which peaks at 1550 µg/mL. Release from the Y3+ and Ce3+ glass-ceramics reached 320 µg/mL for Si4+ and 630 µg/mL for Na+. The range of antioxidant capacity (ABTS assay) for all samples was 0.31-3.9 mMTE. No significant reduction in MC 3T3 Osteoblast cell viability was observed for any composition tested.
Subject(s)
Antioxidants , Silicon Dioxide , Ceramics/chemistry , Glass/chemistry , Oxides/chemistry , Silicates , Silicon Dioxide/chemistry , Sodium , Sodium Compounds , Solubility , YttriumABSTRACT
Titanium (Ti4+ ) containing materials have been widely used in medical applications due to its associated bioactivity in vivo. This study investigates the replacement of Si4+ with Ti4+ within the system SiO2 -Na2 O-CaO-P2 O5 to determine its influence on glass structure. This strategy was conducted in order to control the glass solubility to further improve the cellular response. Ti4+ incorporation was found to have little influence on the glass transition temperature (Tg = 520 ± 8°C) and magic angle spinning-nuclear magnetic resonance (MAS-NMR) shifts (-80 ppm) up to additions of 18 wt %. However, at 30 wt % the Tg increased to 600°C and MAS-NMR spectra shifted to -88 ppm. There was also an associated reduction in glass solubility as a function of Ti4+ incorporation as determined by inductively coupled plasma optical emission spectroscopy where Si4+ (1649-44 mg/L) and Na+ (892-36 mg/L) levels greatly reduced while Ca2+ (3-5 mg/L) and PO43- (2-7 mg/L) levels remained relatively unchanged. MC3T3 osteoblasts were used for cell culture testing and it was determined that the Ti4+ glasses increased cell viability and also facilitated greater osteoblast adhesion and proliferation to the glass surface compared to the control glass. © 2015 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 104B: 1703-1712, 2016.
Subject(s)
Ceramics , Materials Testing , Osteoblasts/metabolism , Titanium , Animals , Cell Line , Ceramics/chemistry , Ceramics/pharmacokinetics , Ceramics/pharmacology , Mice , Osteoblasts/cytology , Titanium/chemistry , Titanium/pharmacokinetics , Titanium/pharmacologyABSTRACT
Hydroxyapatite (Ca10(PO4)6(OH)2) is widely investigated as an implantable material for hard tissue restoration due to its osteoconductive properties. However, hydroxyapatite in bulk form is limited as its mechanical properties are insufficient for load-bearing orthopedic applications. Attempts have been made to improve the mechanical properties of hydroxyapatite, by incorporating ceramic fillers, but the resultant composite materials require high sintering temperatures to facilitate densification, leading to the decomposition of hydroxyapatite into tricalcium phosphate, tetra-calcium phosphate and CaO phases. One method of improving the properties of hydroxyapatite is to incorporate bioactive glass particles as a second phase. These typically have lower softening points which could possibly facilitate sintering at lower temperatures. In this work, a bioactive glass (SiO2-CaO-ZnO-Na2O-TiO2) is incorporated (10, 20 and 30 wt%) into hydroxyapatite as a reinforcing phase. X-ray diffraction confirmed that no additional phases (other than hydroxyapatite) were formed at a sintering temperature of 560 â with up to 30 wt% glass addition. The addition of the glass phase increased the % crystallinity and the relative density of the composites. The biaxial flexural strength increased to 36 MPa with glass addition, and there was no significant change in hardness as a function of maturation. The pH of the incubation media increased to pH 10 or 11 through glass addition, and ion release profiles determined that Si, Na and P were released from the composites. Calcium phosphate precipitation was encouraged in simulated body fluid with the incorporation of the bioactive glass phase, and cell culture testing in MC-3T3 osteoblasts determined that the composite materials did not significantly reduce cell viability.
Subject(s)
Bone Substitutes/chemistry , Calcium Compounds/chemistry , Durapatite/chemistry , Glass/chemistry , Oxides/chemistry , Sodium Compounds/chemistry , Titanium/chemistry , Zinc Oxide/chemistry , Animals , Cell Line , Cell Survival , Materials Testing , Mice , Osteoblasts/cytology , Weight-Bearing , X-Ray DiffractionABSTRACT
Silver (Ag) coated bioactive glass particles (Ag-BG) were formulated and compared to uncoated controls (BG) in relation to glass characterization, solubility and microbiology. X-ray diffraction (XRD) confirmed a crystalline AgNP surface coating while ion release studies determined low Ag release (<2 mg/L). Cell culture studies presented increased cell viability (127 and 102%) with lower liquid extract (50 and 100 ml/ml) concentrations. Antibacterial testing of Ag-BG in E. coli, S. epidermidis and S. aureus significantly reduced bacterial cell viability by 60-90%. Composites of Ag-BG/CMC-Dex Hydrogels were formulated and characterized. Agar diffusion testing was conducted where Ag-BG/hydrogel composites produced the largest inhibition zones of 7 mm (E. coli), 5 mm (S. aureus) and 4 mm (S. epidermidis).
Subject(s)
Cell Survival/drug effects , Hydrogels/chemistry , Metal Nanoparticles/chemistry , Silver/chemistry , Escherichia coli/drug effects , Eyeglasses , Hydrogels/pharmacology , Silver/pharmacology , Solubility , Staphylococcus aureus/drug effects , Staphylococcus epidermidis/drug effects , X-Ray DiffractionABSTRACT
Glass ionomer cements (GICs) are composed of an acid degradable glass, polyacrylic acid and water. Sol-gel processing to prepare the glass phase has certain advantages, such as the ability to employ lower synthesis temperatures than melt quenching and glasses that are reported to have higher purity. A previous study reported the effects of glass synthesis route on GIC fabrication. However, in that study, the sol-gel derived glass exhibited a reduced concentration of cations. This study investigates increasing the cation content of a sol-gel derived glass, 12CaO.4SrO.36ZnO.48SiO2 (molar ratio) by heating before aging to reduce dissolution of cations. This glass was prepared by both sol-gel and melt-quenched routes. GICs were subsequently prepared using both glasses. The resultant cement based on the sol-gel derived glass had a shorter working time than the cement based on the melt-quenched one. Contrary to this, setting time was considerably longer for the cement based on the sol-gel derived glass than for the cement based on the melt-quenched one. The cements based on the sol-gel derived glass were stronger in both compression and biaxial flexure than the cements prepared from the melt-quenched glass. The differences in setting and mechanical properties were associated with both cation content in the glass phase and the different surface area of the resultant cements.