Interfacial Interactions of a Myoglobin/DOPC Hybrid System at the Air-Water Interface and Its Physicochemical Properties.

In the present study, the intermolecular interactions between a water-insoluble phospholipid (DOPC) and water-soluble protein (myoglobin) and the interaction among themselves were investigated at the air-water interface using the Langmuir and Langmuir-Blodgett techniques. The effects of changes in physicochemical factors, like pH and temperature, on these interactions were also examined. Surface pressure-molecular area (π-A) isotherms of the DOPC monolayer at the air-water interface, with and without myoglobin (Myo) revealed the evolution of various physical properties, such as elastic, thermodynamic, and hysteric properties, in response to changes in subphase pH and temperature. With the increment of subphase pH from 5 to 7 at a fixed temperature (20 °C), the DOPC isotherm expanded, and the in-plane elasticity (CS-1) decreased, but no significant presence of hysteresis was encountered in either of the pH values. On the other hand, a diminution of temperature (from 20 to 5 °C) leads to an expansion of monolayers yielding low elasticity and significant hysteresis. The incorporation of Myo molecules within the DOPC monolayer decreased the CS-1 value of the DOPC monolayer. Such a decrement in CS-1 was also encountered while increasing the pH and decreasing the temperature (T) of the subphase in the absence of Myo. Systematic expansion of DOPC isotherm and increased hysteric area with the increase in Myo proportion were observed and the atomic force microscopy (AFM) observations suggested a strong conjugation between Myo and DOPC in the mixed monolayer. The denaturation effect of Myo molecules was studied using AFM at different temperatures. Furthermore, the Myo molecules were found to be most surface active at pH = 7, which is very close to its isoelectric point. These observations come up with the interaction mechanism between biomolecules under dynamically varied conditions.

High temperature behaviour of Ag-exchanged Y zeolites used for PFAS sequestration from water.

Per- and polyfluorinated alkyl substances (PFAS) are anthropogenic compounds which have recently drawn great attention due to their high biological, chemical and physical stability and lipid/water repelling properties. The present work aims to provide for the first time insights on the thermal behaviour of Ag-exchanged Y zeolite loaded with perfluorooctanoic acid (PFOA, C8HF15O2) and perfluorooctane sulfonate (PFOS, C8HF17O3S) emphasizing the close link between crystal structure and desorption/dehydration processes. Elemental and isotopic abundance of carbon analysis, thermal analysis, and in situ high-temperature synchrotron X-ray powder diffraction were used to evaluate critically if the thermal regeneration affects the initial zeolites structural features. Rietveld refinements revealed that PFAS sites are emptied in the 550-650 °C temperature range, when the thermal degradation of PFOA and PFOS are reached. The crystallinity of the samples is not affected by the adsorption/desorption processes. Upon heating, the removal of both PFAS and coadsorbed water molecules induced a cation migration of the silver ions and changes of initial geometry of the framework. The dimensions of the channels remain comparable to those of the pristine materials thus suggesting the potential re-use of the samples in other adsorption PFAS cycles. Additionally, once regenerated and reloaded Ag-exchanged Y can re-adsorb PFAS in amounts comparable to that adsorbed in the first cycle with clear benefits on the costs of the whole water treatment process.

Influence of Vacancies in Manganese Hexacyanoferrate Cathode for Organic Na-Ion Batteries: A Structural Perspective.

Manganese hexacyanoferrates (MnHCF) are promising positive electrode materials for non-aqueous batteries, including Na-ion batteries, due to their large specific capacity (>130 mAh g-1 ), high discharge potential and sustainability. Typically, the electrochemical reaction of MnHCF associates with phase and structural changes, due to the Jahn-Teller (JT) distortion of Mn sites upon the charge process. To understand the effect of the MnHCF structure on its electrochemical performance, two MnHCF materials with different vacancies content are investigated herein. The electrochemical results show that the sample with lower vacancy content (4 %) exhibits relatively higher capacity retention of 99.1 % and 92.6 % at 2nd and 10th cycles, respectively, with respect to 97.4 % and 79.3 % in sample with higher vacancy content (11 %). Ex-situ X-ray absorption spectroscopy (XAS) and ex situ X-ray diffraction (XRD) characterization results show that a weaker cooperative JT-distortion effect and relatively smaller crystal structure modification occurred for the material with lower vacancies, which explains the better electrochemical performance in cycled electrodes.

Physicochemical Properties of a Bi-aromatic Heterocyclic-Azo/BSA Hybrid System at the Air-Water Interface.

The interaction of a heterocyclic azo compound with itself and with bovine serum albumin (BSA) is realized by probing the structural modifications in Langmuir (L) monolayers and Langmuir-Blodgett (LB) films. It was found from the pressure-area/molecule isotherms that the elastic, thermodynamic, and hysteretic properties of the pure azo L monolayer were strongly altered due to the variation of temperature and pH of subphase water. In addition to that, the modification of such properties of the azo L monolayer due to mixing with BSA was also studied. The incorporation of BSA within the azo molecular assembly reduced the elasticity of that assembly. Such reduction of in-plane elasticity of the pure azo monolayer can also be achieved by reducing the temperature and pH of subphase water without adding BSA. A reduction in area per molecule of the azo assembly at the air-water interface associated with the conformational change from horizontal to vertical orientation facilitating π-π interaction was observed with increase in temperature and pH of the subphase. Such parameters also affected the interactions between azo and BSA molecules within the azo/BSA binary system. The structures of pure azo and binary films can be determined after they are transferred to hydrophilic and hydrophobic Si surfaces using the LB technique. Their out-of-plane and in-plane structures, as extracted from two complementary surface sensitive techniques, X-ray reflectivity and atomic force microscopy, were found to be strongly dependent on mixing with BSA, subphase pH, temperature, and substrate nature.

A multidisciplinary study unveils the nature of a Roman ink of the I century AD.

A multi-instrumental approach combining highly sensitive Synchrotron Radiation-based techniques was used to provide information on the real composition of a dry black ink powder found in a bronze inkwell of the first century AD. The presence of Pb, Cu and Fe in the powder, revealed by XRF and ICP-OES data, leads to raise several hypotheses on their origin. The inkpot and its lid were also investigated by Hand-Held XRF, revealing a bronze alloy (Cu-Sn) with a certain amount of Fe and Pb. The lid was found to be particularly enriched in lead. XRPD, XAS and FTIR measurements showed a substantial presence of silicates and common clay minerals in the ink along with cerussite and malachite, Pb and Cu bearing-carbonates, respectively. These evidences support the hypothesis of an important contamination of the ink sample by the burial environment (soil) and the presence of degradation products of the bronze inkpot. The combined use of IR, Raman, and GC-MS evidenced that the black ink is mainly composed of amorphous carbon deriving from the combustion of organic material mixed with a natural binding agent, Arabic gum.

In-Operando Diffraction and Spectroscopic Evaluation of Pure, Zr-, and Ce-Doped Vanadium Dioxide Thermochromic Films Derived via Glycolate Synthesis.

Pure and doped vanadia (VO2, V0.98Zr0.02O2, V0.98Ce0.02O2) samples were prepared by wet chemistry synthesis from vanadyl glycolate intermediate phase and tape casted into films. Combining in-operando grazing incidence synchrotron X-ray diffraction and Raman spectroscopy, we studied the structural evolution of the films under isothermal conditions. The setup allowed assessment of the thermochromic functionality with continuous monitoring of the monoclinic to tetragonal transition in pure and doped vanadia phases, responsible for the transmission and reflection of light in the infrared part of the solar spectrum. The materials characterisation by X-ray diffraction beamline (MCX) goniometer demonstrated ideal performance, combining flexible geometry, high resolution, and the potential to accommodate the multi-channel equipment for in-operando characterisation. This method proved viable for evaluating the relevant structural and physical, and thereof functional properties of these systems. We revealed that dopants reduce the transition temperature by 5 °C on average. The synthetic route of the films was held responsible for the observed phase separation. The more favourable behaviour of cerium-doped sample was attributed to cerium alkoxide behaviour. In addition, structural, microstructural, thermal, and spectroscopic characterisation on powder samples was performed to gain more insight into the development of the phases that are responsible for thermochromic features in a broader range of doping ratios. The influence of the dopants on the extent of the thermochromic transition (transmission to reflection hysteresis) was also evaluated using (micro) structural, thermal and spectroscopic methods of powder samples. Characterisations showed that zirconium doping in 2, 4, and 6 mol% significantly influenced the phase composition and morphology of the precursor. Vanadium oxides other than VO2 can easily crystallise; however, a thermal treatment regime that allowed crystallisation of VO2 as a single phase was established.

Synthesis of some tropane-based compounds targeting colon cancer.

Background: In continuation of a previous work concerned with the anticancer activity of some 8-alkyl-2,4-bisarylidene-8-nortropan-3-ones, this work focuses on further modification to the tropane/pyran fused skeleton aiming to obtain improved anticancer activity. Methodology: Reaction of 8-alkyl-2,4-bisarylidene-8-nortropan-3-ones 1-21 with malononitrile under basic conditions afforded tropane/pyran hybrids 22-40 and tropane/pyridine hybrids 41, 42. X-ray crystallography for compounds 22 and 41 as representative examples confirmed their structures. They were tested for their anticancer activity in the HCT116 cell line. Results: Compounds 26 and 33 were the most active compounds with IC50 values of 3.39 and 0.01 µM against HCT116. Moreover, they revealed cyclin-dependent kinase-2 (CDK2) inhibition with IC50 = 104.91 and 49.13 nM, respectively. Furthermore, molecular docking of compounds 26 and 33 in the active site of CDK2 confirmed the obtained results. Conclusion: Tropane/pyran scaffold can be considered as a promising core for anticancer agents acting as CDK2 inhibitors.

Origin of Mangetotransport Properties in APCVD Deposited Tin Oxide Thin Films.

Transparent conducting oxides (TCO) with high electrical conductivity and at the same time high transparency in the visible spectrum are an important class of materials widely used in many devices requiring a transparent contact such as light-emitting diodes, solar cells and display screens. Since the improvement of electrical conductivity usually leads to degradation of optical transparency, a fine-tuning sample preparation process and a better understanding of the correlation between structural and transport properties is necessary for optimizing the properties of TCO for use in such devices. Here we report a structural and magnetotransport study of tin oxide (SnO2), a well-known and commonly used TCO, prepared by a simple and relatively cheap Atmospheric Pressure Chemical Vapour Deposition (APCVD) method in the form of thin films deposited on soda-lime glass substrates. The thin films were deposited at two different temperatures (which were previously found to be close to optimum for our setup), 590 °C and 610 °C, and with (doped) or without (undoped) the addition of fluorine dopants. Scanning Electron Microscopy (SEM) and Grazing Incidence X-ray Diffraction (GIXRD) revealed the presence of inhomogeneity in the samples, on a bigger scale in form of grains (80-200 nm), and on a smaller scale in form of crystallites (10-25 nm). Charge carrier density and mobility extracted from DC resistivity and Hall effect measurements were in the ranges 1-3 × 1020 cm-3 and 10-20 cm2/Vs, which are typical values for SnO2 films, and show a negligible temperature dependence from room temperature down to -269 °C. Such behaviour is ascribed to grain boundary scattering, with the interior of the grains degenerately doped (i.e., the Fermi level is situated well above the conduction band minimum) and with negligible electrostatic barriers at the grain boundaries (due to high dopant concentration). The observed difference for factor 2 in mobility among the thin-film SnO2 samples most likely arises due to the difference in the preferred orientation of crystallites (texture coefficient).

Structure and Elastic Properties of an Unsymmetrical Bi-Heterocyclic Azo Compound in the Langmuir Monolayer and Langmuir-Blodgett Film.

We study the structure and elastic properties of the bi-heterocyclic azo compound at the air-water interface through surface pressure (π)-area (A) isotherm recording followed by transferring them on hydrophilic and hydrophobic Si surfaces by the Langmuir-Blodgett (LB) deposition method. A substantial change in the area/molecule is observed as a function of subphase pH and temperature. Such parameters strongly influence intramolecular interactions within azo molecules and the interactions between azo molecules and water that manifested in higher surface activity at low temperature and high pH, which in turn modifies the elasticity of azo assembly at the air-water interface. A large pH-dependent hysteresis with negative change in entropy, indicating molecular rearrangements, is observed. Molecular assembly formed at the air-water interface is then transferred onto hydrophilic and hydrophobic Si surfaces at two different surface pressures (5 and 30 mN/m) by the LB technique. The structural analysis performed by X-ray reflectivity and atomic force microscopy techniques suggests that the LB films exhibit an abrupt layered structure on hydrophilic Si, whereas an overall rough film is formed on hydrophobic Si. The coverage and compactness of individual layers are found to increase with the deposition pressure (5 to 30 mN/m).

Iron Speciation in Organic Matter Fractions Isolated from Soils Amended with Biochar and Organic Fertilizers.

The role and distribution of iron (Fe) species in physical soil fractions have received remarkably little attention in field-scale systems. Here, we identify and quantify the Fe phases into two fractions (fine sand, FSa, and fine silt and clay, FSi + Cl), isolated from an agricultural soil unamended and amended with different organic materials, by Fe K-edge extended X-ray absorption fine structure (EXAFS) spectroscopy. The linear combination fitting and wavelet transform of EXAFS data revealed noticeable differences between unamended FSa and FSi + Cl fractions. Specifically, the FSi + Cl fraction was mainly characterized by ferrihydrite (48%) and Fe(III)-soil organic matter (SOM) complexes (37%), whereas in the FSa fraction, ferrihydrite still represented a major phase (44%), with a lower contribution from Fe(III)-SOM (18%). In the FSa fraction, the addition of the organic amendments resulted in an increase of Fe-SOM complexes (31-35%) and a decrease of ferrihydrite (28-29%). By contrast, in the amended FSi + Cl fractions, the added organic matter led to negligible changes in percent ferrihydrite. Therefore, regardless of the amendment type, the addition of organic matter to soil increased the capability of the coarse fraction (FSa) to stabilize organic carbon, thus pointing out that the role of FSa in carbon sequestration in agricultural soils at a global scale may be overlooked.

Titanium-based potassium-ion battery positive electrode with extraordinarily high redox potential.

The rapid progress in mass-market applications of metal-ion batteries intensifies the development of economically feasible electrode materials based on earth-abundant elements. Here, we report on a record-breaking titanium-based positive electrode material, KTiPO4F, exhibiting a superior electrode potential of 3.6 V in a potassium-ion cell, which is extraordinarily high for titanium redox transitions. We hypothesize that such an unexpectedly major boost of the electrode potential benefits from the synergy of the cumulative inductive effect of two anions and charge/vacancy ordering. Carbon-coated electrode materials display no capacity fading when cycled at 5C rate for 100 cycles, which coupled with extremely low energy barriers for potassium-ion migration of 0.2 eV anticipates high-power applications. Our contribution shows that the titanium redox activity traditionally considered as "reducing" can be upshifted to near-4V electrode potentials thus providing a playground to design sustainable and cost-effective titanium-containing positive electrode materials with promising electrochemical characteristics.

ZnO@TiO2 Core Shell Nanorod Arrays with Tailored Structural, Electrical, and Optical Properties for Photovoltaic Application.

ZnO has prominent electron transport and optical properties, beneficial for photovoltaic application, but its surface is prone to the formation of defects. To overcome this problem, we deposited nanostructured TiO2 thin film on ZnO nanorods to form a stable shell. ZnO nanorods synthesized by wet-chemistry are single crystals. Three different procedures for deposition of TiO2 were applied. The influence of preparation methods and parameters on the structure, morphology, electrical and optical properties were studied. Nanostructured TiO2 shells show different morphologies dependent on deposition methods: (1) separated nanoparticles (by pulsed laser deposition (PLD) in Ar), (2) a layer with nonhomogeneous thickness (by PLD in vacuum or DC reactive magnetron sputtering), and (3) a homogenous thin layer along the nanorods (by chemical deposition). Based on the structural study, we chose the preparation parameters to obtain an anatase structure of the TiO2 shell. Impedance spectroscopy shows pure electron conductivity that was considerably better in all the ZnO@TiO2 than in bare ZnO nanorods or TiO2 layers. The best conductivity among the studied samples and the lowest activation energy was observed for the sample with a chemically deposited TiO2 shell. Higher transparency in the visible part of spectrum was achieved for the sample with a homogenous TiO2 layer along the nanorods, then in the samples with a layer of varying thickness.

Electronic structure of MAPbI3 and MAPbCl3: importance of band alignment.

Since their first appearance, organic-inorganic perovskite absorbers have been capturing the attention of the scientific community. While high efficiency devices highlight the importance of band level alignment, very little is known on the origin of the strong n-doping character observed in the perovskite. Here, by means of a highly accurate photoemission study, we shed light on the energy alignment in perovskite-based devices. Our results suggest that the interaction with the substrate may be the driver for the observed doping in the perovskite samples.

Synthesis, structural and antimicrobial studies of binary and ternary complexes of a new tridentate thiosemicarbazone.

A new thiosemicarbazone ligand was synthesized and characterized using spectroscopic techniques (UV-Vis and IR) and synchrotron x-ray powder diffraction. With M2+ = Mn2+, Zn2+ and Cd2+, coordination compounds of the type (M[L]2) were isolated. In the presence of sodium dithiocarbamate salts (NadiEtdtc.3H2O = sodium diethyldithiocarbamate trihydrate and Napipdtc = sodium piperidinedithiocarbamate), Zn2+ and Cd2+ were able to form ternary octahedral complexes where each metal binds a deprotonated (thiosemicarbazone) ligand, a monobasic dithiocarbamate ligand and a water molecule. In vitro biological evaluation tests of the free HL ligand and its metal complexes against selected fungal and bacterial cultures were performed. Compared with HL, the complexes displayed enhanced biological activities and ternary Zn (II) complexes displayed comparable antibacterial activities to the chloramphenicol standard.

Impact of Average, Local, and Electronic Structure on Visible Light Photocatalysis in Novel BiREWO6 (RE = Eu and Tb) Nanomaterials.

Crystal structures of hydrothermally synthesized BiEuWO6 and BiTbWO6 nanomaterials are deduced for the first time by combined Rietveld refinement of neutron and synchrotron data using the ordered and disordered models available in literature. The ordered model is validated for the average structure of these nanomaterials, and it is further supported by the local structure analysis using neutron pair distribution function. Nanomaterials are characterized by field-emission scanning electron microscopy, transmission electron microscopy, Brunauer-Emmett-Teller surface area, diffused reflectance spectroscopy, and Raman Spectroscopy. Rare-earth-substituted nanomaterials are found to be efficient photocatalysts over the parent Bi2WO6 under visible light irradiation for Congo-red dye degradation. Particularly, BiTbWO6 shows an enhanced photocatalytic (PC) activity compared to BiEuWO6, as evidenced from the photoelectrochemical and time-resolved fluorescence studies. The difference in the observed PC activity of these nanomaterials is also explored through a detailed comparison of crystal structure and electronic structure calculated through the density functional theory method.

What's underneath? A non-destructive depth profile of painted stratigraphies by synchrotron grazing incidence X-ray diffraction.

Many works of art are complex systems consisting of a core completed by the overlapping of several painted layers. In this work, we apply an innovative method based on grazing incidence X-ray diffraction (GIXRD) with synchrotron radiation (SR) to investigate polychrome stratigraphies with a completely non-destructive approach. The SR-GIXRD measurements provided direct and unambiguous compositional and stratigraphic information of the crystalline species lying in different layers. The investigations performed on a small fragment sampled from a painted terracotta statue allowed the identification of pigments, fillers, aggregates of the matrix and newly formed decay salts in micrometric-thin paint layers. Furthermore, the great potentiality of this study is the feasibility of depth profile investigations on multi-layered painted samples from cultural heritage objects without resorting to cross sectional analyses. Currently, the method is non-destructive but it can be potentially non-invasive in situations where small moveable artworks can be placed into the measurement chamber of the SR-XRD beamlines. The overall study paves the way to a new scenario of artwork investigations, shedding light on new unexplored approaches for non-destructive studies of cultural heritage objects, their conservation history and their interaction with the environment.

Vitamin C/Stearic Acid Hybrid Monolayer Adsorption at Air-Water and Air-Solid Interfaces.

Because of the antioxidant activity of vitamin C (Vit C) polar heads, they can be used as a protective agent for fatty acids. Hence, the study on the growth of Vit C/stearic acid (SA) mixed binary films at air-water interface (known as Langmuir monolayer) and air-solid interface (known as Langmuir-Blodgett films) is of paramount interest. Although Vit C is situated at subsurface beneath SA molecules and interacts via hydrogen bonding between the hydroxyl groups of Vit C and SA, several Vit C molecules may infiltrate within SA two-dimensional matrix at the air-water interface. The increased mole fraction of Vit C (0.125-0.5) and the reduction of temperature (from 22 to 10 °C) of the subphase water result in an increase in the amount of adsorbed Vit C at the air-water interface. The surface pressure (π)-area (A) isotherms illustrate that such inclusion of Vit C provokes a spreading out of Vit C/SA binary monolayers, which leads to an alteration of different physicochemical parameters such as elasticity, Gibbs free energy of mixing, enthalpy, entropy, interaction energy parameter, and activity coefficient. However, being polar in nature, the transfer of pure Vit C on substrates gets affected. It can be transferred onto substrate by mixing suitably with SA as confirmed by infrared spectra. Their structures, extracted X-ray reflectivity, and atomic force microscopy (topography and phase imaging) are found to be strongly dependent on the nature of the substrate (hydrophilic and hydrophobic).

Chitosan-fatty acid interaction mediated growth of Langmuir monolayer and Langmuir-Blodgett films.

The interaction of chitosan with bio-membranes, which plays important role in deciding its use in biological applications, is realized by investigating the interaction of chitosan with stearic acid (fatty acid) in Langmuir monolayers (at air-water interface) and Langmuir-Blodgett (LB) films (after transferring it onto solid substrate). It is found from the pressure-area isotherms that the chitosan insertion causes an expansion of chitosan-fatty acid hybrid monolayers, which reduces the elasticity and make the film heterogeneous. It is likely that at low surface pressure chitosan is situated at the interface, interacting with stearic acid molecules via electrostatic and hydrophobic interactions whereas at high pressure chitosan mainly located at subsurface beneath stearic acid molecules. In the latter case the interaction is predominantly electrostatic yielding very small contribution to the surface pressure. The reduction of temperature of the subphase water allows more number of chitosan molecules to reach surface to increase the pressure/interaction. On the other hand, although pure chitosan is found difficult to relocate on the substrate from air-water interface due to its hydrophilic-like nature, it alongside stearic acid (amphiphilic molecules) can be transferred onto substrate using LB technique as evident from infrared spectra. Their out-of-plane and in-plane structures, as extracted from two complementary surface sensitive techniques- X-ray reflectivity and atomic force microscopy, are found strongly dependent on the chitosan mole fraction and the deposition pressure. These analysis of the film-structure will essentially allow one to model the system better and provide better insight into the interaction.

Lu-, Sm-, and Gd-Doped Ceria: A Comparative Approach to Their Structural Properties.

A room temperature structural study has been performed through the whole compositional range of the (Ce1-xLux)O2-x/2 system by synchrotron X-ray diffraction and µ-Raman spectroscopy. Samples were synthesized by thermal treatment in air at 1373 K of coprecipitated mixed oxalates. A CeO2-based solid solution with a fluorite-type structure (F) was found to be stable up to x = 0.4, while at higher Lu content a (F + C) biphasic region was observed, with C being the cubic atomic arrangement typical of sesquioxides of the heaviest rare earths. A comparative approach including also results deriving from other (Ce1-xREx)O2-x/2 systems (RE ≡ Gd and Sm) allowed us to conclude that the compositional extent of the F solid solution is a complex function of RE3+ size and RE compressibility. On this basis, the dependence of ionic conductivity on the RE identity was interpreted as related both to the Ce4+/RE3+ size closeness and to RE compressibility. Ce4+/RE3+ dimensional issues were also revealed to rule the appearance of the hybrid structure observed in the two aforementioned systems, consisting of the intimate intergrowth of C microdomains within the F-based host lattice. Moreover, a more extended definition of F-based solid solution, including also the hybrid structure, is formulated; the latter is meant as a modification of the former, occurring when mainly RE-vacancy aggregates are incorporated into the host lattice in spite of isolated RE ions. By µ-Raman spectroscopy it was possible to demonstrate that the mechanism of oxygen vacancy formation is common to all the systems studied, provided that the structure of the F-based solid solution, also including the hybrid structure, is retained.

Structural features of Sm- and Gd-doped ceria studied by synchrotron X-ray diffraction and µ-Raman spectroscopy.

A structural study of Sm- and Gd-doped ceria was performed with the aim to clarify some unexplained structural features. (Ce1-xREx)O2-x/2 samples (RE ≡ Sm, Gd; x = 0, 0.1, ..., 1) were prepared by coprecipitation of mixed oxalates and subsequent thermal treatment at 1473, 1173, or 1073 K in air; they were then analyzed at room temperature both by synchrotron X-ray diffraction and µ-Raman spectroscopy. Two structural models were adopted to fit the experimental data, namely, a fluoritic one, resembling the CeO2 structure at low RE content, and a hybrid one at higher RE content, intermediate between the CeO2 and the RE2O3 structures. Two main transitions were detected along the compositional range: (a) an RE-dependent transition at the boundary between the fluoritic and the hybrid regions, of a chemical nature; (b) an RE-independent transition within the hybrid region at ∼0.5, having a purely geometrical nature. The presence of two finely interlaced F- and C-based structures within the hybrid region was confirmed, and hints of their composition were obtained by µ-Raman spectroscopy. The obtained results indicate a possible explanation for the non-Vegard behavioral trend of the cell parameters.