Oleogelation of extra virgin olive oil by different gelators affects lipid digestion and polyphenol bioaccessibility.

The possibility to steer extra virgin olive oil (EVOO) digestion and polyphenol bioaccessibility through oleogelation was investigated. EVOO was converted into oleogels using lipophilic (monoglycerides, rice wax, sunflower wax, phytosterols) or hydrophilic (whey protein aerogel particles, WP) gelators. In-vitro digestion demonstrated that the oleogelator nature influenced both lipid digestion and polyphenol bioaccessibility. WP-based oleogels presented ∼100% free fatty acid release compared to ∼64% for unstructured EVOO and ∼40 to ∼55% for lipophilic-based oleogels. This behavior was attributed to the ability of WP to promote micelle formation through oleogel destructuring. Contrarily, the lower lipolysis of EVOO gelled with lipophilic gelators compared to unstructured EVOO suggested that the gelator obstructed lipase accessibility. Tyrosol and hydroxytyrosol bioaccessibility increased for WP oleogels (∼27%), while liposoluble-based oleogels reduced it by 7 to 13%. These findings highlight the deep effect of the gelator choice on the digestion fate of EVOO components in the human body.

Optimising Soy and Pea Protein Gelation to Obtain Hydrogels Intended as Precursors of Food-Grade Dried Porous Materials.

Dried porous materials based on plant proteins are attracting large attention thanks to their potential use as sustainable food ingredients. Nevertheless, plant proteins present lower gelling properties than animal ones. Plant protein gelling could be improved by optimising gelation conditions by acting on protein concentration, pH, and ionic strength. This work aimed to systematically study the effect of these factors on the gelation behaviour of soy and pea protein isolates. Protein suspensions having different concentrations (10, 15, and 20% w/w), pH (3.0, 4.5, 7.0), and ionic strength (IS, 0.0, 0.6, 1.5 M) were heat-treated (95 °C for 15 min) and characterised for rheological properties and physical stability. Strong hydrogels having an elastic modulus (G') higher than 103 Pa and able to retain more than 90% water were only obtained from suspensions containing at least 15% soy protein, far from the isoelectric point and at an IS above 0.6 M. By contrast, pea protein gelation was achieved only at a high concentration (20%), and always resulted in weak gels, which showed increasing G' with the increase in pH and IS. Results were rationalised into a map identifying the gelation conditions to modulate the rheological properties of soy and pea protein hydrogels, for their subsequent conversion into xerogels, cryogels, and aerogels.

Upcycling soy processing waste (okara) into structured emulsions for fat replacement in sweet bread.

BACKGROUND: Okara is the main waste of soy processing and represents a large economic and environmental burden. Nevertheless, the fibre and protein content of okara supports the upcycling of this critical waste. This study aimed at assessing the potentialities of okara as an innovative oil-structuring ingredient. RESULTS: Structured emulsions containing up to 520 g oil kg-1 and having oil holding capacity higher than 75% were prepared by high-shear mixing of okara with liquid oil. Microstructural analysis showed that the oil phase was evenly distributed in the okara matrix, probably due to the emulsification ability of the okara fibre-protein network. The performance of okara structured emulsions as palm margarine replacer were tested in the preparation of sweet bread. Okara emulsions (500 g oil kg-1 ) resulted not only in a significant reduction of saturated fatty acids (>50%), but also in an increased protein and fibre content. Compared to the use of liquid oil solely, okara emulsions allowed reducing the oil released from bread loaf. Bread containing okara emulsion also presented physical and sensory properties similar to those of palm margarine bread, the only exception being a more perceivable oiliness and rancid defect, which are, however, easily preventable by applying appropriate formulation strategies. CONCLUSION: The use of okara as innovative ingredient for oil structuring would answer the current demand for sustainable heathy diets, based on clean-label foods with low-saturated fat content, and increased protein and fibre supply. This approach would also allow the complete upcycling of this critical waste. © 2022 Society of Chemical Industry.

Steering protein and lipid digestibility by oleogelation with protein aerogels.

The aim of the present work was to assess the effect of an innovative oleogelation strategy, the aerogel-template approach, on protein and lipid digestibility. Whey protein isolate (WP) was converted into aerogel particles via supercritical CO2 drying. Oleogels were then prepared by absorption of sunflower (SO) or flaxseed (FLX) oil (80%, w/w) into the aerogel particle template and subjected to in vitro digestion. WP aerogel-templated oleogels showed a specific destructuring behaviour during digestion. Confocal micrographs clearly demonstrated that the original oleogel structure was lost at the gastric level, with the release of oil droplets smaller (D32 < 10 µm) than those observed in the case of the unstructured oils (D32 > 30 µm), stabilised by undigested aerogel proteins. Sodium dodecyl sulphate polyacrylamide gel electrophoresis (SDS-PAGE) and bicinchoninic acid (BCA) assay confirmed that aerogelation reduced the gastric proteolysis of WP from nearly 100% to 70%. The digestion of the SO oleogel led to similar gastric protein digestibility. In contrast, in the case of the FLX oleogel, gastric proteolysis decreased to 40%, suggesting a role of the oil nature in steering WP aerogel digestion. In all cases, upon intestinal digestion aerogel proteins resulted completely hydrolysed. The lipolysis degree of SO (75%) and FLX (34%) oil in the oleogels was higher than that of the unstructured SO (66%) and FLX (24%) oils, due to the larger surface offered by smaller oil droplets to the action of intestinal lipases. This was confirmed by dynamic light scattering, showing a shift towards smaller size in the digestive micelle distribution of oleogels at the end of the intestinal phase. Oleogelation through the WP aerogel-template approach could be regarded as a strategy to steer lipid digestibility while also modulating the release of bioaccessible peptides.

Conversion of Whey Protein Aerogel Particles into Oleogels: Effect of Oil Type on Structural Features.

Protein aerogel particles prepared by supercritical-CO2-drying (SCD) of ground whey protein (WP) hydrogels (20% w/w, pH 5.7) were converted into oleogels by dispersion in selected edible oils (castor, cod liver, corn, flaxseed, MCT, peanut and sunflower oil). The obtained oleogels were analysed for oil content, microstructure, rheological properties, and ATR-FTIR spectra. Except for castor oil, solid-like, plastic materials with comparable composition (80% oil, 20% WP) and rheological properties (G'~3.5 × 105 Pa, G″~0.20 × 105 Pa, critical stress~800 Pa, tanδ~0.060) were obtained. Optical and confocal microscopy showed that the generated structure was associated with the capillary-driven absorption of oil into the porous aerogel particles interconnected via particle-particle interactions. In this structure, the oil was stably entrapped. Results evidenced the reduced role of edible oil characteristics with the exception of castor oil, whose high polarity probably favoured particle-oil interactions hindering particle networking. This work demonstrates that WP aerogels could be regarded as versatile oleogel templates allowing the structuring of many edible oils into solid-like materials.

Study on the possibility of developing food-grade hydrophobic bio-aerogels by using an oleogel template approach.

The feasibility of producing food-grade hydrophobic bio-aerogels by supercritical-carbon dioxide (SC-CO2) extraction of oil from oleogels was investigated for the first time. Medium chain triglycerides (MCT) oil was gelled using ethylcellulose (EC) at increasing concentration (10, 15, 20% w/w) and grade (EC20, 45, 100), eventually in combination with fillers. Different SC-CO2 oil extraction procedures were tested. The acquired results show that both oleogel formulation and extraction conditions can steer the EC scaffold structure. The increase in EC concentration and grade resulted in oleogels more structurally stable to SC-CO2 extraction. The application of a pulsed extraction procedure allowed obtaining a low-density (0.39 â€‹g/cm3) EC scaffold presenting 60% oil. Addition of freeze dried lettuce powder improved macrostructure homogeneity. The obtained results lay the foundations for developing food-grade hydrophobic bio-aerogels, which are expected to present unique oil absorption and bioactive delivery features.

Exploring the Potentialities of Photoinduced Glycation to Steer Protein Functionalities: The Study Case of Freeze-Dried Egg White Proteins/Carbohydrates Mixtures.

The capacity of UV-C light to induce glycation and modify functional properties of systems containing freeze-dried egg white proteins and carbohydrates with increasing molecular weight (i.e., glucose, maltose, trehalose and maltodextrin) was studied. Color changes induced by light exposure were taken as typical indicators of glycation. Samples were then analyzed for selected physical (critical concentration, particle size and viscosity), chemical (ovalbumin content) and technofunctional properties (gelling temperature and foaming capacity). The presence of sugars during exposure to UV-C light promoted intense browning and decreased ovalbumin content by circa 30%. Concomitantly, up to a 3-fold increase in critical concentration of the aqueous suspensions of the irradiated protein-carbohydrate powders and changes in particle size were detected. These modifications were consistent with the development of non-enzymatic browning reactions upon UV-C light irradiation. Photoinduced glycation was associated to a decrease in viscosity, a tendency to form gel at temperature lower by up to 8 °C and a better capacity of foam stabilization. The intensity of these changes seems to be affected by the nature of the carbohydrates reacting with proteins, with longer carbohydrates able to produce systems with higher foam stability capacity.

Combined high-power ultrasound and high-pressure homogenization nanoemulsification: The effect of energy density, oil content and emulsifier type and content.

Combinations of ultrasound (US) and high-pressure homogenization (HPH) at low-medium energy densities were studied as alternative processes to individual US and HPH to produce Tween 80 and whey protein stabilized nanoemulsions, while reducing the energy input. To this aim, preliminary trials were performed to compare emulsification efficacy of single and combined HPH and US treatments delivering low-medium energy densities. Results highlighted the efficacy of US-HPH combined process in reducing the energy required to produce nanoemulsions stabilized with both Tween 80 and whey protein isolate. Subsequently, the effect of emulsifier content (1-3% w/w), oil amount (10-20% w/w) and energy density (47-175 MJ/m3) on emulsion mean particle diameter was evaluated by means of a central composite design. Particles of 140-190 nm were obtained by delivering 175 MJ/m3 energy density at emulsions containing 3% (w/w) Tween 80 and 10% (w/w) oil. In the case of whey protein isolate stabilized emulsions, a reduced emulsifier amount (1% w/w) and intermediate energy density (120 MJ/m3) allowed a minimum droplet size around 220-250 nm to be achieved. Results showed that, in both cases, at least 50% of the energy density should be delivered by HPH to obtain the minimum particle diameter.