Your browser doesn't support javascript.
loading
Show: 20 | 50 | 100
Results 1 - 2 de 2
Filter
Add more filters










Database
Language
Publication year range
1.
Sci Rep ; 13(1): 2169, 2023 Feb 07.
Article in English | MEDLINE | ID: mdl-36750645

ABSTRACT

Lithium-ion batteries based on high-voltage cathode materials, such as LiCoPO4, despite being promising in terms of specific power, still suffer from poor cycle life due to the lower stability of common non-aqueous electrolytes at higher voltages. One way to overcome this issue might be decreasing the working potential of the battery by doping LiCoPO4 by Fe, thus reducing electrolyte degradation upon cycling. However, such modification requires a deep understanding of the structural behavior of cathode material upon lithiation/delithiation. Here we used a combination of operando synchrotron-based XRD and XAS to investigate the dynamics of d-metal local atomic structure and charge state upon cycling of LiCo0.5Fe0.5PO4 mixed d-metal olivine cathode material. Principal components analysis (PCA) of XAS data allowed the extraction of spectra of individual phases in the material and their concentrations. For both Co and Fe two components were extracted, they correspond to fully lithiated and delithiated phases of LixMPO4 (where M = Fe, Co). Thus, we were able to track the phase transitions in the material upon charge and discharge and quantitatively analyze the M2+/M3+ electrochemical conversion rate for both Fe and Co. Rietveld's refinement of XRD data allowed us to analyze the changes in the lattice of cathode material and their reversibility upon (de)lithiation during cycling. The calculation of DFT and Bader charge analysis expects the oxygen redox procedure combined with d-metals redox, which supplements iron charge variations and dominates at high voltages when x < 0.75 in LixCoFePO4.

2.
Phys Chem Chem Phys ; 24(10): 5823-5832, 2022 Mar 09.
Article in English | MEDLINE | ID: mdl-35224598

ABSTRACT

Lithium-excess oxides Li1.2Ti0.4Mn0.4O2 and Li1.3Nb0.3Mn0.4O2 with a disordered rock-salt structure and Mn3+/Mn4+ as a redox couple were compared to analyze the effect of different d0 metal ions on the local structure and Li+ ion migration. These cathode materials were obtained by mechanochemically assisted solid-state synthesis. Using XRD, 7Li NMR and EPR spectroscopy and transmission electron microscopy it was shown that the Mn ions are prone to form clusters, while d0 metal ions are evenly distributed in the crystal lattice. The presence of Nb5+ ions contributes to the formation of noticeably larger Mn clusters and larger gaps in the Li+ migration maps as compared to Ti4+. These results were confirmed by the geometrical-topological method, BVSE simulation and DFT calculations, and are in good agreement with the Li diffusion coefficient determined by GITT, which is 1.5 orders of magnitude higher in Li1.2Ti0.4Mn0.4O2 than that in Li1.3Nb0.3Mn0.4O2.

SELECTION OF CITATIONS
SEARCH DETAIL
...