Insights into the Pseudocapacitive Behavior of Sulfurized Polymer Electrodes for Li-S Batteries.

Practical applications of sulfurized polymer (SP) materials in Li-S batteries (LSBs) are often written off due to their low S content (≈35 wt%). Unlike conventional S8 /C composite cathodes, SP materials are shown to function as pseudocapacitors with an active carbon backbone using a comprehensive array of tools including in situ Raman and electrochemical impedance spectroscopy. Critical metric analysis of LSBs containing SP materials with an active carbon skeleton shows that SP cathodes with 35 wt% S are suitable for 350 Wh kg-1 target at the cell level if S loading >5 mg cm-2 , electrolyte-to-sulfur ratio <2 µL mg-1 , and negative-to-positive ratio <5 can be achieved. Although 3D current collectors can enable such high loadings, they often add excess mass decreasing the total capacity. An "active" carbon nanotube bucky sandwich current collector developed here offsets its excess weight by contributing to the electric double layer capacity. SP cathodes (35 wt% S) with ≈5.5 mg cm-2 of S loading (≈15.8 mg cm-2 of SP loading) yield a sulfur-level gravimetric capacity ≈1360 mAh gs -1 (≈690 mAh gs -1 ), electrode level capacity 200 mAh gelectrode -1 (100 mAh gelectrode -1 ), and areal capacity ≈7.8 mAh cm-2 (≈4.0 mAh cm-2 ) at 0.1C (1C) rate for ≈100 cycles at E/S ratio = 7 µL mg-1 .

Three-Dimensional Si Anodes with Fast Diffusion, High Capacity, High Rate Capability, and Long Cycle Life.

There are many interfaces in conventional nanostructured silicon anodes for LIBs, including (1) the solid-electrolyte interface (SEI), (2) interfaces between Si nanoparticles (NPs) and binders, and (3) interface between the current collector and active materials (CCAMI). Interfacial layers (e.g., graphene, activated carbon) coated on conventional Cu foil current collectors are often used to improve charge transfer and reduce CCAMI resistance. Indeed, our detailed studies show that the introduction of interfacial graphene layers results in an ∼20-60% increase in capacity after 500 cycles at 0.1 C. While the capacity is enhanced by inclusion of interfacial layers or conductive additives, they do not resolve problems associated with the diffusion of Li+ ions in the anode. Such electrodes that cannot accommodate the fast diffusion of Li+ ions are prone to plating. Here, we show that the use of freestanding and scalably produced carbon nanotube (CNT) Bucky paper or Bucky sandwich electrodes containing Si NPs (diameter of ∼100 nm) exhibits up to ∼1200 and 1900% increases in the gravimetric capacity after 500 cycles at 0.1 C, respectively, when discharged to 0.1 V. Using detailed electrochemical impedance spectroscopy, we show that the diffusion time constants in the Bucky paper and Bucky sandwich electrodes are increased by 2 orders of magnitude compared to that in the bare Cu foil. Furthermore, we demonstrate that the Bucky paper and Bucky sandwich electrodes can withstand high rates up to 4 C and show long cycle life up to ∼500 cycles at 0.1 C. Finally, we show that the Bucky sandwich electrode architecture with smaller diameter Si NPs (∼30 nm) leads to capacities as high as ∼1490 mAh/g (∼1635 mAh/g) at 0.1 C up to 100 cycles when discharged to 0.1 V (0.01 V).

Interfacial charge transfer with exfoliated graphene inhibits fibril formation in lysozyme amyloid.

Amyloid fibrillation is known to contribute in a variety of diseases including neurodegenerative disorders (e.g., Alzheimer's and Parkinson's disease) and type II diabetes. The inhibition of fibrillation has been suggested as a possible therapeutic strategy to prevent neuronal and pancreatic ß-cell death associated with amyloid diseases. To this end, strong hydrophobic and π-π interactions between proteins and nanomaterials at the nanobio interface could be used to mitigate the stacking of amyloid structures associated with fibrillation. In this study, the authors show that exfoliated graphene effectively inhibits the formation of amyloid fibrils using a model amyloid-forming protein, viz., hen egg white lysozyme (HEWL). While previous theoretical models posit that hydrophobic and π-π stacking interactions result in strong interactions between graphene and proteins, the authors experimentally identified the presence of additional interfacial charge transfer interactions between HEWL and graphene using micro-Raman spectroscopy and Kelvin probe force microscopy. Their photoluminescence spectroscopy and transmission electron microscopy studies evince that the interfacial charge transfer combined with hydrophobic and π-π stacking interactions, specifically between the nanomaterial and the amino acid tryptophan, increase HEWL adsorption on graphene and thereby inhibit amyloid fibrillation.

Rapid detection of urokinase plasminogen activator using flexible paper-based graphene-gold platform.

Many studies have shown that urokinase plasminogen activator (uPA) is causally involved in promoting cancer invasion and metastasis. Thus, monitoring uPA levels could be very useful in cancer diagnosis, identification of initial metastasis, and guiding cancer treatment. Here, the authors developed a novel and scalable uPA sensor based on a graphene-gold nanoparticle platform that uses fluorescence of quantum dots to rapidly (<1 h) detect uPA up to 100 pM. Indeed, the authors' sensor is highly selective and showed an ability to sense up to 100 pM uPA even in the presence of complex biological milieu such as the fetal bovine serum.

Defect-induced electronic states amplify the cellular toxicity of ZnO nanoparticles.

Zinc oxide nanoparticles (ZnO NPs) are used in numerous applications, including sunscreens, cosmetics, textiles, and electrical devices. Increased consumer and occupational exposure to ZnO NPs potentially poses a risk for toxicity. While many studies have examined the toxicity of ZnO NPs, little is known regarding the toxicological impact of inherent defects arising from batch-to-batch variations. It was hypothesized that the presence of varying chemical defects in ZnO NPs will contribute to cellular toxicity in rat aortic endothelial cells (RAECs). Pristine and defected ZnO NPs (oxidized, reduced, and annealed) were prepared and assessed three major cellular outcomes; cytotoxicity/apoptosis, reactive oxygen species production and oxidative stress, and endoplasmic reticulum (ER) stress. ZnO NPs chemical defects were confirmed by X-ray photoelectron spectroscopy and photoluminescence. Increased toxicity was observed in defected ZnO NPs compared to the pristine NPs as measured by cell viability, ER stress, and glutathione redox potential. It was determined that ZnO NPs induced ER stress through the PERK pathway. Taken together, these results demonstrate a previously unrecognized contribution of chemical defects to the toxicity of ZnO NPs, which should be considered in the risk assessment of engineered nanomaterials.

Analyte-induced disruption of luminescence quenching (AIDLuQ) for femtomolar detection of biomarkers.

Here, we present a graphene-based analyte-induced disruption of luminescence quenching (AIDLuQ) assay for specific detection of biomarkers with femtomolar sensitivity. In the AIDLuQ assay, antibody (Ab)-conjugated quantum dots (QDs) are initially deposited on graphene-coated paper. However, the emission from QDs is quenched due to resonance energy transfer to graphene. Upon the addition of an analyte (An) corresponding to Ab, the QDs-Ab-An complex is lifted above the surface resulting in the disruption of the quenching from graphene and the recovery of the luminescence of the QDs. The percentage of recovery depends upon the concentration of the analyte, allowing one to create standard curves for effective quantification. Despite its rapidity in assay time (15-20 min), the graphene platform has limited sensitivities. To further enhance this sensitivity, we embedded gold nanoparticles (Au NPs) into graphene paper. The graphene-Au paper exhibited excellent sensitivity in our model assay and was able to detect ∼10 fM biotin and IgG, unlike graphene that showed only ∼1 nM and ∼10 pM sensitivities.

Silver nanoparticle immunomodulatory potential in absence of direct cytotoxicity in RAW 264.7 macrophages and MPRO 2.1 neutrophils.

Engineered nanomaterials (ENM) are being used in a wide range of consumer products and pharmaceuticals; hence, there is an increasing risk for human exposure and potential adverse outcomes. The immune system, vital in host defense and protection against environmental agents, is typically initiated and executed by innate effector immune cells including macrophages and neutrophils. Previous literature has reported the immune system as a major target of ENM toxicity; however, there is inconsistency regarding the immunotoxicity of ENM. This could be attributed to differences in ENM physicochemical properties, cellular models examined, biocorona formation, etc. Thus, the current study examined the toxicity and immunomodulatory effects of silver nanoparticles (AgNP), one of the most utilized ENM in consumer and medical products, in two key innate immune cell models, e.g. RAW 264.7 cells (macrophages) and differentiated MPRO 2.1 cells (promyelocytes/neutrophils). The results showed that despite a generation of reactive oxygen species, exposure to 20 nm citrate-coated AgNP was not associated with major oxidative damage, inflammatory responses, nor cytotoxicity. Nevertheless, and most importantly, pre-exposure to the AgNP for 24 h enhanced RAW 264.7 cell phagocytic ability as well as the release of inflammatory cytokine interleukin-6 in response to lipopolysaccharide (LPS). In MPRO 2.1 cells, AgNP pre-exposure also resulted in enhanced phagocytic ability; however, these cells manifest reduced cell degranulation (elastase release) and oxidative burst in response to phorbol myristate acetate (PMA). Taken together, these findings indicated to us that exposure to AgNP, despite not being directly (cyto)toxic to these cells, had the potential to alter immune cell responses. The findings underscore the import of assessing immune cell function post-exposure to ENM beyond the standard endpoints such as oxidative stress and cytotoxicity. In addition, these findings further illustrate the importance of understanding the underlying molecular mechanisms of ENM-cellular interactions, particularly in the immune system.

Graphene-hBN non-van der Waals vertical heterostructures for four- electron oxygen reduction reaction.

A novel vertical non-van der Waals (non-vdW) heterostructure of graphene and hexagonal boron nitride (G/hBN) is realized and its application in direct four-electron oxygen reduction reaction (ORR) in alkaline medium is established. The G/hBN differs from previously demonstrated vdW heterostructures, where it has a chemical bridging between graphene and hBN allowing a direct charge transfer - resulting in high ORR activity. The ORR efficacy of G/hBN is compared with that of graphene-hBN vdW structure and individual layers of graphene and hBN along with that of benchmark platinum/carbon (Pt/C). The ORR activity of G/hBN is found to be on par with Pt/C in terms of current density but with much higher electrochemical stability and methanol tolerance. The onset potential of the G/hBN is found to be improved from 780 mV at a glassy carbon electrode to 930 mV and 940 mV in gold and platinum electrodes, respectively, indicating its substrate-dependent catalytic activity. This opens possibilities of new benchmark catalysts of metals capped with G/hBN atomic layers, where the underneath metal is protected while keeping the activity similar to that of pristine metal. Density functional theory-based calculations are found to be supporting the observed augmented ORR performance of G/hBN.

Biocorona formation contributes to silver nanoparticle induced endoplasmic reticulum stress.

Prior research has demonstrated cells exposed to silver nanoparticles (AgNPs) undergo endoplasmic reticulum (ER) stress leading to cellular apoptosis and toxicity, however, the fundamental mechanism underlying AgNP-induced ER stress is unknown. We hypothesize the biophysical interactions between AgNPs and adsorbed proteins lead to misfolded proteins to elicit an ER stress response. Our investigation examined rat aortic endothelial cells (RAEC) exposed to 20 or 100 nm AgNPs with or without a biocorona (BC) consisting of bovine serum albumin (BSA), high density lipoprotein (HDL) or fetal bovine serum (FBS) to form a complex BC. The presence of a BC consisting of BSA or FBS proteins significantly reduced uptake of 20 nm and 100 nm AgNPs in RAEC. Western blot analysis indicated robust activation of the IREα and PERK pathways in RAEC exposed to 20 nm despite the reduction in uptake by the presence of a BC. This was not observed for the 100 nm AgNPs. Hyperspectral darkfield microscopy qualitatively confirmed that the preformed BC was maintained following uptake by RAEC. Transmission electron microscopy demonstrated a size dependent effect on the sub-cellular localization of AgNPs. Overall, these results suggest that AgNP size, surface area and BC formation governs the induction of ER stress and alterations in intracellular trafficking.

Chemiplasmonics for high-throughput biosensors.

BACKGROUND: The sensitivity of ELISA for biomarker detection can be significantly increased by integrating fluorescence with plasmonics. In surface-plasmon-coupled emission, the fluorophore emission is generally enhanced through the so-called physical mechanism due to an increase in the local electric field. Despite its fairly high enhancement factors, the use of surface-plasmon-coupled emission for high-throughput and point-of-care applications is still hampered due to the need for expensive focusing optics and spectrometers. METHODS: Here, we describe a new chemiplasmonic-sensing paradigm for enhanced emission through the molecular interactions between aromatic dyes and C60 films on Ag substrates. RESULTS: A 20-fold enhancement in the emission from rhodamine B-labeled biomolecules can be readily elicited without quenching its red color emission. As a proof of concept, we demonstrate two model bioassays using: 1) the RhB-streptavidin and biotin complexes in which the dye was excited using an inexpensive laser pointer and the ensuing enhanced emission was recorded by a smartphone camera without the need for focusing optics and 2) high-throughput 96-well plate assay for a model antigen (rabbit immunoglobulin) that showed detection sensitivity as low as 6.6 pM. CONCLUSION: Our results show clear evidence that chemiplasmonic sensors can be extended to detect biomarkers in a point-of-care setting through a smartphone in simple normal incidence geometry without the need for focusing optics. Furthermore, chemiplasmonic sensors also facilitate high-throughput screening of biomarkers in the conventional 96-well plate format with 10-20 times higher sensitivity.

Simultaneous Suppression of the Dendrite Formation and Shuttle Effect in a Lithium-Sulfur Battery by Bilateral Solid Electrolyte Interface.

Although the reversible and inexpensive energy storage characteristics of the lithium-sulfur (Li-S) battery have made it a promising candidate for electrical energy storage, the dendrite growth (anode) and shuttle effect (cathode) hinder its practical application. Here, it is shown that new electrolytes for Li-S batteries promote the simultaneous formation of bilateral solid electrolyte interfaces on the sulfur-host cathode and lithium anode, thus effectively suppressing the shuttle effect and dendrite growth. These high-capacity Li-S batteries with new electrolytes exhibit a long-term cycling stability, ultrafast-charge/slow-discharge rates, super-low self-discharge performance, and a capacity retention of 94.9% even after a 130 d long storage. Importantly, the long cycle stability of these industrial grade high-capacity Li-S pouch cells with new electrolytes will provide the basis for creating robust energy dense Li-S batteries with an extensive life cycle.

Three-photon imaging using defect-induced photoluminescence in biocompatible ZnO nanoparticles.

BACKGROUND: Although optical spectroscopy promises improved lateral resolution for cancer imaging, its clinical use is seriously impeded by background fluorescence and photon attenuation even in the so-called two-photon absorption (2PA) imaging modality. An efficient strategy to meet the clinical cancer imaging needs, beyond what two-photon absorption (2PA) offers, is to use longer excitation wavelengths through three-photon absorption (3PA). A variety of fluorescent dyes and nanoparticles (NPs) have been used in 3PA imaging. However, their nonlinear 3PA coefficient is often low necessitating high excitation powers, which cause overheating, photodamage, and photo-induced toxicity. Doped wide band gap semiconductors such as Mn:ZnS NPs have previously been used for 3PA but suffer from poor 3PA coefficients. METHODS: Here, we prepared ZnO NPs with intrinsic defects with high 3PA coefficients using a polyol method. We functionalized them with peptides for selective uptake by glioblastoma U87MG cells and used breast cancer MCF-7 cells as control for 3PA studies. Uptake was measured using inductively coupled plasma-mass spectrometry. Biocompatibility studies were performed using reactive oxygen species and cell viability assays. RESULTS: We demonstrate that ZnO NPs, which have a band gap of 3.37 eV with an order of magnitude higher 3PA coefficients, can facilitate the use of longer excitation wavelengths 950-1,100 nm for bioimaging. We used the presence intrinsic defects (such as O interstitials and Zn vacancies) in ZnO NPs to induce electronic states within the band gap that can support strong visible luminescence 550-620 nm without the need for extrinsic doping. The peptide functionalization of ZnO NPs showed selective uptake by U87MG cells unlike MCF-7 cells without the integrin receptors. Furthermore, all ZnO NPs were found to be biocompatible for 3PA imaging. CONCLUSION: We show that defect-induced luminescence 550-620 nm in ZnO NPs (20 nm) due to 3PA at longer excitation (975 nm) can be used for 3PA imaging of U87MG glioblastoma cells with lower background noise.

Saturable Absorption in 2D Ti3 C2 MXene Thin Films for Passive Photonic Diodes.

MXenes comprise a new class of 2D transition metal carbides, nitrides, and carbonitrides that exhibit unique light-matter interactions. Recently, 2D Ti3 CNTx (Tx represents functional groups such as OH and F) was found to exhibit nonlinear saturable absorption (SA) or increased transmittance at higher light fluences, which is useful for mode locking in fiber-based femtosecond lasers. However, the fundamental origin and thickness dependence of SA behavior in MXenes remain to be understood. 2D Ti3 C2 Tx thin films of different thicknesses are fabricated using an interfacial film formation technique to systematically study their nonlinear optical properties. Using the open aperture Z-scan method, it is found that the SA behavior in Ti3 C2 Tx MXene arises from plasmon-induced increase in the ground state absorption at photon energies above the threshold for free carrier oscillations. The saturation fluence and modulation depth of Ti3 C2 Tx MXene is observed to be dependent on the film thickness. Unlike other 2D materials, Ti3 C2 Tx is found to show higher threshold for light-induced damage with up to 50% increase in nonlinear transmittance. Lastly, building on the SA behavior of Ti3 C2 Tx MXenes, a Ti3 C2 Tx MXene-based photonic diode that breaks time-reversal symmetry to achieve nonreciprocal transmission of nanosecond laser pulses is demonstrated.

A Versatile Carbon Nanotube-Based Scalable Approach for Improving Interfaces in Li-Ion Battery Electrodes.

Resistive interfaces within the electrodes limit the energy and power densities of a battery, for example, a Li-ion battery (LIB). Typically, active materials are mixed with conductive additives in organic solvents to form a slurry, which is then coated on current collectors (e.g., bare or carbon-coated Al foils) to reduce the inherent resistance of the active material. Although many approaches using nanomaterials to either replace Al foils or improve conductivity within the active materials have been previously demonstrated, the resistance at the current collector active material interface (CCAMI), a key factor for enhancing the energy and power densities, remains unaddressed. We show that carbon nanotubes (CNTs), either directly grown or spray-coated on Al foils, are highly effective in reducing the CCAMI resistance of traditional LIB cathode materials (LiFePO4 or LFP and LiNi0.33Co0.33Mn0.33O2 or NMC). Moreover, the CNT coatings displace the need for currently used toxic organic solvents (e.g., N-methyl-2-pyrrolidone) by providing capillary channels, which improve the wetting of aqueous dispersions containing active materials. The vertically aligned CNT-coated electrodes exhibited energy densities as high as (1) ∼500 W h kg-1 at ∼170 W kg-1 for LFP and (2) ∼760 W h kg-1 at ∼570 W kg-1 for NMC. The LIBs with CCAMI-engineered electrodes withstood discharge rates as high as 600 mA g-1 for 500 cycles in the case of LFP, where commercial electrodes failed. The CNT-based CCAMI engineering approach is versatile with wide applicability to improve the performance of even textured active materials for both cathodes and anodes.

A micro-Raman study of exfoliated few-layered n-type Bi2 Te2.7Se0.3.

Previously we showed that the thermoelectric (TE) performance of bulk n-type Bi2Te2.7Se0.3 can be enhanced by subjecting it to a combined process of chemical or mechanical exfoliation (C/ME) followed by a rapid densification and restacking of the exfoliated layers via the spark-plasma-sintering technique (SPS). Here, we present a systematic micro-Raman study of two-dimensional flakes of n-type Bi2Te2.7Se0.3 produced by the C/ME process, as a function of the flake thickness. We found Raman evidence for flakes with: (i) integer number of quintuples which exhibited a strong electron-phonon coupling, and (ii) non-integer number of quintuples, or sub-quintuples which exhibited the forbidden IR active mode due to symmetry lowering. Detailed atomic force microscopy was used to confirm the number of quintuples in all flakes examined in this study. The restacking and densification of these flakes by SPS promoted the formation of charged grain boundaries, which led to the enhanced TE properties via the energy filtering process.

Variations in biocorona formation related to defects in the structure of single walled carbon nanotubes and the hyperlipidemic disease state.

Ball-milling utilizes mechanical stress to modify properties of carbon nanotubes (CNTs) including size, capping, and functionalization. Ball-milling, however, may introduce structural defects resulting in altered CNT-biomolecule interactions. Nanomaterial-biomolecule interactions result in the formation of the biocorona (BC), which alters nanomaterial properties, function, and biological responses. The formation of the BC is governed by the nanomaterial physicochemical properties and the physiological environment. Underlying disease states such as cardiovascular disease can alter the biological milieu possibly leading to unique BC identities. In this ex vivo study, we evaluated variations in the formation of the BC on single-walled CNTs (SWCNTs) due to physicochemical alterations in structure resulting from ball-milling and variations in the environment due to the high-cholesterol disease state. Increased ball-milling time of SWCNTs resulted in enhanced structural defects. Following incubation in normal mouse serum, label-free quantitative proteomics identified differences in the biomolecular content of the BC due to the ball-milling process. Further, incubation in cholesterol-rich mouse serum resulted in the formation of unique BCs compared to SWCNTs incubated in normal serum. Our study demonstrates that the BC is modified due to physicochemical modifications such as defects induced by ball-milling and physiological disease conditions, which may result in variable biological responses.

Charge-transfer interactions induce surface dependent conformational changes in apolipoprotein biocorona.

Upon introduction into a biological system, engineered nanomaterials (ENMs) rapidly associate with a variety of biomolecules such as proteins and lipids to form a biocorona. The presence of "biocorona" influences nano-bio interactions considerably, and could ultimately result in altered biological responses. Apolipoprotein A-I (ApoA-I), the major constituent of high-density lipoprotein (HDL), is one of the most prevalent proteins found in ENM-biocorona irrespective of ENM nature, size, and shape. Given the importance of ApoA-I in HDL and cholesterol transport, it is necessary to understand the mechanisms of ApoA-I adsorption and the associated structural changes for assessing consequences of ENM exposure. Here, the authors used a comprehensive array of microscopic and spectroscopic tools to elucidate the interactions between ApoA-I and 100 nm Ag nanoparticles (AgNPs) with four different surface functional groups. The authors found that the protein adsorption and secondary structural changes are highly dependent on the surface functionality. Our electrochemical studies provided new evidence for charge transfer interactions that influence ApoA-I unfolding. While the unfolding of ApoA-I on AgNPs did not significantly change their uptake and short-term cytotoxicity, the authors observed that it strongly altered the ability of only some AgNPs to generate of reactive oxygen species. Our results shed new light on the importance of surface functionality and charge transfer interactions in biocorona formation.

Contribution of engineered nanomaterials physicochemical properties to mast cell degranulation.

The rapid development of engineered nanomaterials (ENMs) has grown dramatically in the last decade, with increased use in consumer products, industrial materials, and nanomedicines. However, due to increased manufacturing, there is concern that human and environmental exposures may lead to adverse immune outcomes. Mast cells, central to the innate immune response, are one of the earliest sensors of environmental insult and have been shown to play a role in ENM-mediated immune responses. Our laboratory previously determined that mast cells are activated via a non-FcεRI mediated response following silver nanoparticle (Ag NP) exposure, which was dependent upon key physicochemical properties. Using bone marrow-derived mast cells (BMMCs), we tested the hypothesis that ENM physicochemical properties influence mast cell degranulation. Exposure to 13 physicochemically distinct ENMs caused a range of mast degranulation responses, with smaller sized Ag NPs (5 nm and 20 nm) causing the most dramatic response. Mast cell responses were dependent on ENMs physicochemical properties such as size, apparent surface area, and zeta potential. Surprisingly, minimal ENM cellular association by mast cells was not correlated with mast cell degranulation. This study suggests that a subset of ENMs may elicit an allergic response and contribute to the exacerbation of allergic diseases.

Impact absorption properties of carbon fiber reinforced bucky sponges.

We describe the super compressible and highly recoverable response of bucky sponges as they are struck by a heavy flat-punch striker. The bucky sponges studied here are structurally stable, self-assembled mixtures of multiwalled carbon nanotubes (MWCNTs) and carbon fibers (CFs). We engineered the microstructure of the sponges by controlling their porosity using different CF contents. Their mechanical properties and energy dissipation characteristics during impact loading are presented as a function of their composition. The inclusion of CFs improves the impact force damping by up to 50% and the specific damping capacity by up to 7% compared to bucky sponges without CFs. The sponges also exhibit significantly better stress mitigation characteristics compared to vertically aligned CNT foams of similar densities. We show that delamination occurs at the MWCNT-CF interfaces during unloading, and it arises from the heterogeneous fibrous microstructure of the bucky sponges.

Defect density in multiwalled carbon nanotubes influences ovalbumin adsorption and promotes macrophage activation and CD4(+) T-cell proliferation.

Carbon nanotubes (CNTs) are of great interest for the development of drugs and vaccines due to their unique physicochemical properties. The high surface area to volume ratio and delocalized pi-electron cloud of CNTs promote binding of proteins to the surface forming a protein corona. This unique feature of CNTs has been recognized for potential delivery of antigens for strong and long-lasting antigen-specific immune responses. Based on an earlier study that demonstrated increased protein binding, we propose that carboxylated multiwalled CNTs (MWCNTs) can function as an improved carrier to deliver antigens such as ovalbumin (OVA). To test this hypothesis, we coated carboxylated MWCNTs with OVA and measured uptake and activation of antigen-presenting cells (macrophages) and their ability to stimulate CD4(+) T-cell proliferation. We employed two types of carboxylated MWCNTs with different surface areas and defects (MWCNT-2 and MWCNT-30). MWCNT-2 and MWCNT-30 have surface areas of ~215 m(2)/g and 94 m(2)/g, respectively. The ratios of D- to G-band areas (I D/I G) were 0.97 and 1.37 for MWCNT-2 and MWCNT-30, respectively, samples showing that MWCNT-30 contained more defects. The increase in defects in MWCNT-30 led to increased binding of OVA as compared to MWCNT-2 (1,066±182 µg/mL vs 582±41 µg/mL, respectively). Both types of MWCNTs, along with MWCNT-OVA complexes, showed no observable toxicity to bone-marrow-derived macrophages up to 5 days. Surprisingly, we found that MWCNT-OVA complex significantly increased the expression of major histocompatibility complex class II on macrophages and production of pro-inflammatory cytokines (tumor necrosis factor-α and interleukin 6), while MWCNTs without OVA protein corona did not. The coculture of MWCNT-OVA-complex-treated macrophages and OVA-specific CD4(+) T-cells isolated from OT-II mice demonstrated robust proliferation of CD4(+) T-cells. This study provides strong evidence for a role for defects in carboxylated MWCNTs and their use in the efficient delivery of antigens for the development of next-generation vaccines.