Enrichment of viable bacteria in a micro-volume by free-flow electrophoresis.

Macro- to micro-volume concentration of viable bacteria is performed in a microfluidic chip. The enrichment principle is based on free flow electrophoresis and is demonstrated for Gram positive bacteria. Bacteria from a suspension flow are trapped on a gel interface that separates the trapping location from integrated actuation electrodes in order to enable non-destructive trapping. The microfluidic chip contains integrated electrolytic gas expulsion structures and phaseguides for gel and liquid handling. Trapping efficiency is systematically optimized to reach 25 times the initial concentration from a theoretical maximum of 30. Finally, enrichment from analytically relevant concentrations down to 3 × 10(2) colony forming units per millilitre is demonstrated with a trapping efficiency of 80% which represents the most important parameter in enrichment.

Microfluidic concentration of bacteria by on-chip electrophoresis.

In this contribution, we present a system for efficient preconcentration of pathogens without affecting their viability. Development of miniaturized molecular diagnostic kits requires concentration of the sample, molecule extraction, amplification, and detection. In consequence of low analyte concentrations in real-world samples, preconcentration is a critical step within this workflow. Bacteria and viruses exhibit a negative surface charge and thus can be electrophoretically captured from a continuous flow. The concept of phaseguides was applied to define gel membranes, which enable effective and reversible collection of the target species. E. coli of the strains XL1-blue and K12 were used to evaluate the performance of the device. By suppression of the electroosmotic flow both strains were captured with efficiencies of up to 99%. At a continuous flow of 15 µl/min concentration factors of 50.17 ± 2.23 and 47.36 ± 1.72 were achieved in less than 27 min for XL1-blue and K12, respectively. These results indicate that free flow electrophoresis enables efficient concentration of bacteria and the presented device can contribute to rapid analyses of swab-derived samples.

Phaseguides: a paradigm shift in microfluidic priming and emptying.

Phaseguide technology gives complete control over filling and emptying of any type of microfluidic structures, independent of the chamber and channel geometry. The technique is based on a step-wise advancement of the liquid-air interface using the meniscus pinning effect. In this paper, the main effects and parameters underlying the phaseguiding principle are discussed and a demonstration is given of its potential for dead angle filling, spatially controlled phaseguide overflow and sequential phaseguide overflow, all accumulating in a passive valving approach. Phaseguides represent a new direction in microfluidic design thinking that will prove a leap forward towards more simple, flexible and reliable microfluidic systems.

A microfluidic approach for high efficiency extraction of low molecular weight RNA.

The lack of sample pre-treatment concepts that are easily automatable, miniaturized and highly efficient for both small volumes and low target concentrations, is one of the key issues that block the road towards effective miniaturized diagnostic instruments. This paper presents a novel, highly efficient and simple method for low-molecular weight RNA extraction using electricity only. Cells are lysed by thermo-electric lysis and RNA is purified using a gel-electrophoretic purification step. The combination of the two steps in one integrated cartridge reduces the time frame between the two steps, thus protecting RNA from enzymatic degradation. A disposable chip solution is proposed using a novel dry film resist laminate technology that allows cheap, large-scale fabrication. The chip contains crucial microfluidic innovations that allow for a simple user interface, reproducible functioning and precise quantification. Phaseguides are invented that allow controlled spatial injection of gel, injection of sample and recovery of extracted RNA. A precise sample volume can be defined by integrating electrophoretic actuation electrodes in the microfluidic chamber. Electrolytic gas bubbles that are the result of constant-current actuation are driven out from the chip by the novel introduction of capillary bubble-expulsion techniques. The extraction approach and the functionality of the chip are demonstrated for Escherichia coli and Streptococcus thermophilus bacteria. Linear extraction behavior is obtained for transfer-messenger RNA down to one colony-forming unit per microlitre, or five colony-forming units per chip. The latter is an increase in extraction efficiency of a factor of 1000 with respect to the commercial extraction kit Ambion Ribopure. The chip shows particularly good performance for extraction of low-molecular weight RNA, thereby eliminating the need for large ribosomal RNA and DNA removal. RNA can be extracted in less than 11 min, being a speed-up of more than a factor of 20 with respect to commercial extraction kits. The presented solution may find broad acceptance and application in drug discovery and clinical diagnostics.