Valorization of Sour Cherry Kernels: Extraction of Polyphenols Using Natural Deep Eutectic Solvents (NADESs).

The objective of this research was to optimize the natural deep eutectic solvent (NADES) extraction process from sour cherry kernels (Prunus cerasus L.). For polyphenol isolation, conventional solid-liquid extraction was employed using different concentrations of ethanol (0, 10, 20, 30, 40, 50, 60, 70, 80, 90, and 96%), as well as the innovative NADES extraction technique. In the initial phase of the research, a screening of 10 different NADESs was conducted, while extraction was carried out under constant parameters (50 °C, 1:20 w/w, 60 min). NADES 4, composed of lactic acid and glucose in a molar ratio of 5:1, exhibited the highest efficiency in the polyphenol isolation. In the subsequent phase of the research, response surface methodology (RSM) was utilized to optimize the extraction process. Three independent variables, namely temperature, extraction time, and solid-liquid (S/L) ratio, were examined at three different levels. The extracted samples were analyzed for total phenol (TP) and antioxidant activity using the DPPH, ABTS, and FRAP assays. ANOVA and descriptive statistics (R2 and CV) were performed to fit the applied model. According to RSM, the optimal extraction conditions were determined as follows: temperature of 70 °C, extraction time of 161 min, and S/L ratio of 1:25 w/w.

Structure-function relationship of oat flour fractions when blended with wheat flour: Instrumental and nutritional quality characterization of resulting breads.

The present work investigated the structure-function relationship of dry fractionated oat flour (DFOF) as a techno-functional ingredient using bread as a model system. Mechanically, DFOF fractions (F), that is, F1: <224 µm, F2: 250-280 µm, F3: 280-500 µm, F4: 500-600 µm, and whole oat flour (F5) were blended with white wheat flour at 10%, 30%, and 50% substitution levels for bread making. The blended flours, doughs, and bread samples were assessed for their techno-functional, nutritional, and structural characteristics. The results of Mixolab and the Rapid Visco Analyzer show that the 50% substituted F3 fraction exhibits the highest water absorption properties (69.53%), whereas the 50% F1 fraction exhibits the highest peak viscosity of the past slurry. Analysis of bread samples revealed a lower particle size of DFOF fractions and higher supplementation levels, increased ß-glucan levels (0.13-1.29 g/100 bread (db), reduced fermentable monosaccharides, that is, glucose (1.44-0.33 g/100 g), and fructose (1.06-0.28 g/100 g). The effect of particle size surpassed the substitution level effect on bread volume reduction. The lowest hardness value for F1 is 10%, and the highest value for F2 is 50%. The total number of cells in the bread slice decreased from the control to the F4 fraction (50%). Multi-criteria analysis indicated that DFOF fractions produced breads with similar structure and higher nutritional value developed from white wheat flour. PRACTICAL APPLICATION: The use of mechanically fractionated oat flours fractions in white wheat flour breads can improve the nutritional profile without affecting the physical properties of the bread product. Based on the oat flour fractions, bakers and food processing companies can tailor the bread formulations for high ß-glucan, high fiber, and low reduced sugar claims.

Eco-Friendly Extraction: A green approach to maximizing bioactive extraction from pumpkin (Curcubita moschata L.).

The research focused on optimizing the accelerated solvent extraction (ASE) of carotenoids and polyphenols from pumpkin powder. The study optimized accelerated solvent extraction (ASE) of carotenoids and polyphenols from pumpkin powder. Using a mix of standard score (SS) and artificial neural network (ANN) methods, the extraction process was fine-tuned. The ANN model assessed extraction parameters' significance, achieving high predictability for total carotenoid content (TCC), total phenolic content (TPC), and free radical scavenging capacity (DPPH and ABTS methods). The analysis highlighted the most effective extraction at 50 % concentration, 120 °C temperature, 5 min duration, and 2 cycles, yielding high carotenoid and phenolic content (TCC 571.49 µg/g, TPC 7.85 mg GAE/g). HPLC-DAD profiles of the optimized ASE extract confirmed major carotenoids and phenolic compounds. Strong correlations were found between bioactive compounds and antioxidant activity, emphasizing potential health benefits.

PhInd-Database on Polyphenol Content in Agri-Food By-Products and Waste: Features of the Database.

Timely access to topic-relevant datasets is of paramount importance for the development of any successful strategy (food waste reduction strategy), since datasets illuminate opportunities, challenges and development paths. PhInd is the first comprehensive database on polyphenol content in plant-based by-products from the agri-food sector or the wastewater sector and was developed using peer-reviewed papers published in the period of 2015-2021. In total, >450 scientific manuscripts and >6000 compound entries were included. Database inclusion criteria were polyphenol contents = determined using HPLC/UHPLC quantitative methods. PhInd can be explored through several criteria which are either 'open' or checkboxes. Criteria are given in subsections: (a) plant source; (b) by-product industrial processing; (c) pre-treatment of by-products before the isolation of polyphenols; and (d) the extraction step of polyphenols. Database search results could be explored on the website directly or by downloading Excel files and graphs. This unique database content is beneficial to stakeholders-the food industry, academia, government and citizens.

Wild Garlic (Allium ursinum) Preparations in the Design of Novel Functional Pasta.

This study investigated the design of novel pasta enriched with different forms of wild garlic (WG): a powder, an extract and an encapsulated extract applied at three enrichment levels (low/middle/high). The effect of cooking on changes in the content of bioactive compounds, antioxidative activity, cooking behaviour, texture, colour and sensory properties of the cooked pasta was evaluated. WG preparations significantly increased the antioxidant potential (by 185-600%) as well as the content of phenolics (by 26-146%), flavonoids (by 40-360%) and potassium (up to three-fold) in the cooked pasta, depending on WG type and enrichment level. Flavonoids were dominantly present in the free form. Cooking resulted in a significant loss of flavonoids (39-75%) whereas phenolics were liberated from the matrix. The highest increase in total phenolics and antioxidant activity was exerted by the WG powder and extract. Pasta hardness and adhesiveness were increased, but encapsulated WG deteriorated cooking behaviour. The best-scored enriched pasta regarding sensory quality and texture was that enriched with WG powder at the low/moderate level.

Biomolecules from Macroalgae-Nutritional Profile and Bioactives for Novel Food Product Development.

Seaweed is in the spotlight as a promising source of nutrition for humans as the search for sustainable food production systems continues. Seaweed has a well-documented rich nutritional profile containing compounds such as polyphenols, carotenoids and polysaccharides as well as proteins, fatty acids and minerals. Seaweed processing for the extraction of functional ingredients such as alginate, agar, and carrageenan is well-established. Novel pretreatments such as ultrasound assisted extraction or high-pressure processing can be incorporated to more efficiently extract these targeted ingredients. The scope of products that can be created using seaweed are wide ranging: from bread and noodles to yoghurt and milk and even as an ingredient to enhance the nutritional profile and stability of meat products. There are opportunities for food producers in this area to develop novel food products using seaweed. This review paper discusses the unique properties of seaweed as a food, the processes involved in seaweed aquaculture, and the products that can be developed from this marine biomass. Challenges facing the industry such as consumer hesitation around seaweed products, the safety of seaweed, and processing hurdles will also be discussed.

Toward Better Food Security Using Concepts from Industry 5.0.

The rapid growth of the world population has increased the food demand as well as the need for assurance of food quality, safety, and sustainability. However, food security can easily be compromised by not only natural hazards but also changes in food preferences, political conflicts, and food frauds. In order to contribute to building a more sustainable food system-digitally visible and processes measurable-within this review, we summarized currently available evidence for various information and communication technologies (ICTs) that can be utilized to support collaborative actions, prevent fraudulent activities, and remotely perform real-time monitoring, which has become essential, especially during the COVID-19 pandemic. The Internet of Everything, 6G, blockchain, artificial intelligence, and digital twin are gaining significant attention in recent years in anticipation of leveraging the creativity of human experts in collaboration with efficient, intelligent, and accurate machines, but with limited consideration in the food supply chain. Therefore, this paper provided a thorough review of the food system by showing how various ICT tools can help sense and quantify the food system and highlighting the key enhancements that Industry 5.0 technologies can bring. The vulnerability of the food system can be effectively mitigated with the utilization of various ICTs depending on not only the nature and severity of crisis but also the specificity of the food supply chain. There are numerous ways of implementing these technologies, and they are continuously evolving.

Communicating Function and Co-Creating Healthy Food: Designing a Functional Food Product Together with Consumers.

Functional food is lately an interesting topic from the new product development perspective; complex motivation and expectations of consumers regarding it present a challenge when new products are designed. Co-creation is an interesting alternative to the standard practices by the R & D departments since it directly involves consumers in the various stages of the creation process. This work aims to describe experiences of engaging consumers in different development stages of a functional food product within a project realized at a food research institute. Four consecutive studies were conducted: the first study explored current trends in Serbia regarding the way consumers use functional food and are informed about it; the second study described development of a raspberry seeds extract with antioxidant and anti-proliferative activity confirmed in vitro; the third study tested the same extract in a sample of consumers, validating its usability in food products; and the fourth study described a co-creation session with 18 participants, during which a number of activities were realized to stimulate idea generation. Rather than the final product idea itself, this work is valuable because of detailed insights into the various phases of the co-creation process. It is shown that consumers and food researchers can together engage in the new food product development process as long as the communication between them is rich and with mutual understanding.

Natural Deep Eutectic Solvent (NADES) Extraction Improves Polyphenol Yield and Antioxidant Activity of Wild Thyme (Thymus serpyllum L.) Extracts.

Wild thyme (Thymus serpyllum L.) herbal dust has been recognized as a potential underutilized resource for the recovery of antioxidants. The aim of this paper was to optimize natural deep eutectic solvent (NADES) extraction of polyphenols to obtain improved antioxidant activity of extracts determined by selected in vitro assays (DPPH, FRAP, and ABTS). Twenty different NADES systems were investigated in the first step of the screening of the extraction solvent and l-proline (Pro)-glycerine (Gly) based solvents provided the best results. Preliminary experiments organized by 25-1 fractional factorial design narrowed down the number of extraction factors from five (temperature, extraction time, NADES type, water content and L/S ratio) to three and determined their experimental domain for the final step. A face-centered central composite design with temperature (40-55-70 °C), extraction time (60-120-180 min) and L/S ratio (10-20-30 g NADES/g sample) was applied for influence analysis and process optimization. Multi-response optimization suggested a temperature of 65 °C, time of extraction of 180 min and L/S ratio of 28 g NADES/g DW as optimal extraction parameters. Experimental validation confirmed good agreement between experimental and predicted results in the extract obtained at optimal conditions and the interactions in the most suitable NADES (N16; Pro-Gly-H2O; 1:2:1) were confirmed by the 1H-NMR.

Bioaccessibility and uptake by Caco-2 cells of carotenoids from cereal-based products enriched with butternut squash (Cucurbita moschata L.).

Enriching cereals-based products with bioactive compounds is a valuable strategy to improve product quality. We studied carotenoid bioaccessibility and intestinal uptake from a pumpkin-enriched porridge, cookies and sponge cakes by using in vitro digestion coupled with Caco-2 cell uptake. Among the carotenoids recovered in different products, α-carotene was the most important abundant one. However, lutein displayed a significantly higher bioaccessibility compared to α-carotene and ß-carotene in baked products (up to 10.28% compared to 1.22% and 0.88%, respectively). α-Carotene was the only carotenoid recovered in Caco-2 cells after micelle incubation. Cookie micelles led to the highest percentage of α-carotene cell uptake (2.33% and 1.38% for cookies with butter and cookies with vegetable oil, respectively) compared to the other baked products, followed by dry pumpkin puree micelles (1.31%). Overall, our data show that both bioaccessiblity and cell uptake of carotenoids from cereal-based products are variable and highly depend on food formulation and structure.

Simultaneous Hydrolysis of Ellagitannins and Extraction of Ellagic Acid from Defatted Raspberry Seeds Using Natural Deep Eutectic Solvents (NADES).

Defatted raspberry seeds were used as an alternative source of antioxidants and ellagic acid (EA) extracted using Natural deep eutectic solvents (NADES). In the preliminary study, the best NADES combination (citric acid-betaine) and the most influential variables (temperature, time, and NADES/plant ratio) were selected for the further optimization process. All samples were analyzed in terms of total polyphenol, EA content, and antioxidant activity. Two sets of optimal conditions were generated by response surface methodology. The first set (Opt1) was designed for higher conversion of ellagitannins to EA while the latter set (Opt2) for higher EA content/100 g extract. Opt1 and Opt2 had higher values for all investigated responses compared to 80% ethanolic extract but had a lower conversion rate of ellagitannins to EA compared to acidified methanol extract. The third set of parameters (Opt3) selected beyond the initial experimental domain was used to obtain a sample with the highest EA content/100 g extract. Due to their nature, NADES extracts are ready to use and could have various technological roles in products since they are antioxidants, acidifiers, and colorants. NADES raspberry extracts exhibited higher anti-proliferative activity compared to ethanolic extracts in terms of EC50 values. However, the main contributor of anti-cancer activity in NADES raspberry extracts were individual NADES compounds and/or their newly formed NADES structure.

Kinetic modelling of ultrasound-assisted extraction of phenolics from cereal brans.

Cereal brans are by-products of the milling of cereal grains, which are mainly used as low value ingredients in animal feed. Wheat and oat bran is a rich source of bioactives and phytochemicals, especially phenolic compounds. Within this study, the application of ultrasound (US) technology to assist the extraction of phenolics from oat and wheat bran was investigated (20-45 kHz). Peleg's mathematical model was used to study the kinetics of ultrasound-assisted extraction (UAE) and subsequent stirring of total phenolic compounds (TPC). The surface morphology of cereal brans after extraction was studied using SEM analysis. The excellent agreement was determined between the values of TPC calculated from Peleg's mathematical model and actual experimental results. The constant that represents a time required for the initial phenolic concentration to be extracted to one-half of its initial value has been introduced (K1/2). It was shown that the TPC extraction kinetics was dependent only on K1/2 enabling fast kinetics fitting and comparison between extraction rates. Moreover, different values of K1/2 constant could indicate the differences in brans composition and consequently different influence of US pretreatment on these samples.

Modelling Processes and Products in the Cereal Chain.

In recent years, modelling techniques have become more frequently adopted in the field of food processing, especially for cereal-based products, which are among the most consumed foods in the world. Predictive models and simulations make it possible to explore new approaches and optimize proceedings, potentially helping companies reduce costs and limit carbon emissions. Nevertheless, as the different phases of the food processing chain are highly specialized, advances in modelling are often unknown outside of a single domain, and models rarely take into account more than one step. This paper introduces the first high-level overview of modelling techniques employed in different parts of the cereal supply chain, from farming to storage, from drying to milling, from processing to consumption. This review, issued from a networking project including researchers from over 30 different countries, aims at presenting the current state of the art in each domain, showing common trends and synergies, to finally suggest promising future venues for research.

The perspectives of natural deep eutectic solvents in agri-food sector.

The principles of 'green chemistry' are gaining importance in agri-food sector due to the need to reduce pollution from toxic chemicals, make industrial processes safer and more sustainable, and to offer 'clean-labeled products' required by the consumers. The application of natural deep eutectic solvents (NADES) - natural product-based green liquids is considered the promising alternative to conventional organic solvents. This review is intended to summarize and discuss recent advances related to physicochemical properties of NADES, their applications, compatibility with analytic techniques and toxicological profile, pointing out the challenges and necessary improvements for their wider utilization in agri-food sector. NADES allow extraction of wide range of food compounds and they are proven to be convenient for food-related applications. However, their potential for industrial scale-up utilization is not completely investigated. Examined NADES are readily biodegradable, but only preliminary studies on NADES toxicity which include limited number of NADES molecules are available. Apart from fundamental research dealing with NADES formation and the nature of the interactions and structure underpinning the liquid phase formation, the question of purity of NADES obtained by different synthetic methodologies need to be addressed in the future. Data on physicochemical properties of synthetized NADES are still needed as they are relevant for industrial applications.

Scientific Challenges in Performing Life-Cycle Assessment in the Food Supply Chain.

This paper gives an overview of scientific challenges that occur when performing life-cycle assessment (LCA) in the food supply chain. In order to evaluate these risks, the Failure Mode and Effect Analysis tool has been used. Challenges related to setting the goal and scope of LCA revealed four hot spots: system boundaries of LCA; used functional units; type and quality of data categories, and main assumptions and limitations of the study. Within the inventory analysis, challenging issues are associated with allocation of material and energy flows and waste streams released to the environment. Impact assessment brings uncertainties in choosing appropriate environmental impacts. Finally, in order to interpret results, a scientifically sound sensitivity analysis should be performed to check how stable calculations and results are. Identified challenges pave the way for improving LCA of food supply chains in order to enable comparison of results.

Meripilus giganteus ethanolic extract exhibits pro-apoptotic and anti-proliferative effects in leukemic cell lines.

BACKGROUND: The interest towards botanicals and plant extracts has strongly risen due to their numerous biological effects and ability to counteract chronic diseases development. Among these effects, chemoprevention which represents the possibility to counteract the cancerogenetic process is one of the most studied. The extracts of mushroom Meripilus giganteus (MG) (Phylum of Basidiomycota) showed to exert antimicrobic, antioxidant and antiproliferative effects. Therefore, since its effect in leukemic cell lines has not been previously evaluated, we studied its potential chemopreventive effect in Jurkat and HL-60 cell lines. METHODS: MG ethanolic extract was characterized for its antioxidant activity and scavenging effect against different radical species. Moreover, its phenolic profile was evaluated by HPLC-MS-MS analyses. Flow cytometry (FCM) analyses of Jurkat and HL-60 cells treated with MG extract (0-750 µg/mL) for 24-72 h- allowed to evaluate its cytotoxicity, pro-apoptotic and anti-proliferative effect. To better characterize MG pro-apoptotic mechanism ROS intracellular level and the gene expression level of FAS, BAX and BCL2 were also evaluated. Moreover, to assess MG extract selectivity towards cancer cells, its cytotoxicity was also evaluated in human peripheral blood lymphocytes (PBL). RESULTS: MG extract induced apoptosis in Jurkat and HL-60 cells in a dose- and time- dependent manner by increasing BAX/BCL2 ratio, reducing ROS intracellular level and inducing FAS gene expression level. In fact, reduced ROS level is known to be related to the activation of apoptosis in leukemic cells by the involvement of death receptors. MG extract also induced cell-cycle arrest in HL-60 cells. Moreover, IC50 at 24 h treatment resulted 2 times higher in PBL than in leukemic cell lines. CONCLUSIONS: Our data suggest that MG extract might be considered a promising and partially selective chemopreventive agent since it is able to modulate different mechanisms in transformed cells at concentrations lower than in non-transformed ones.

Optimization of additive content and their combination to improve the quality of pure barley bread.

The objective of this study was to model the influence of pregelatinized OSA starch (OSA), wheat gluten (Gl) and xylanase (Xyl) on breadmaking potential of barley flour by using response surface methodology. Addition of these ingredients had significant effect on specific bread volume, crust and crumb lightness, crumb texture, average cell size and crumb density. OSA showed the most pronounced effect on specific bread volume, average cell size, crumb density and hardness. Interaction between OSA and Gl, as well as Gl and Xyl, respectively, increased and decreased the specific bread volume and crumb chewiness, while the interaction between OSA and Xyl decreased the specific volume decrease and increased crumb chewiness. An optimal barley bread formulation appeared to be the one containing 9.68% OSA, 2.0% Gl and 4.51 g/100 kg Xyl. This optimal barley bread formulation predicted an increment of 14-28% in volume and a decrease of 105-217% in crumb chewiness in comparison to formulations containing medium amounts of improvers (1% Gl, 5% OSA, 2.5 g/100 kg Xyl).

Valorisation of raspberry and blueberry pomace through the formulation of value-added gluten-free cookies.

Successful valorisation of raspberry and blueberry pomace was achieved through their application, as dried and ground powders, in the formulation of value-added gluten-free cookies. Simplex-lattice mixture design approach was applied to obtain the product with the best sensory properties, nutritional profile and antioxidant activity. The highest desirability of 90.0 % was accomplished with the substitution of gluten-free flour mixture with 28.2 % of blueberry and 1.8 % of raspberry pomace. The model was verified. Optimized cookies had similar protein (3.72 %) and carbohydrate (66.7 %) contents as gluten-containing counterparts used for comparison, but significantly lower fat content (10.97 %). Daily portion of the optimized cookies meets: 5.00 % and 7.73 % of dietary reference intakes (DRIs) for linoleic acid, 23.6 % and 34.3 % of DRIs for α-linolenic acid and 10.3 % and 15.6 % of DRIs for dietary fibers, for male and female adults, respectively. The nutritional profile of the optimized formulation makes it comparable with added-value gluten-containing counterparts.

Chemometric optimization of the robustness of the near infrared spectroscopic method in wheat quality control.

A chemometric approach was applied for the optimization of the robustness of the NIRS method for wheat quality control. Due to the high number of experimental (n=6) and response variables to be studied (n=7) the optimization experiment was divided into two stages: screening stage in order to evaluate which of the considered variables were significant, and optimization stage to optimize the identified factors in the previously selected experimental domain. The significant variables were identified by using fractional factorial experimental design, whilst Box-Wilson rotatable central composite design (CCRD) was run to obtain the optimal values for the significant variables. The measured responses included: moisture, protein and wet gluten content, Zeleny sedimentation value and deformation energy. In order to achieve the minimal variation in responses, the optimal factor settings were found by minimizing the propagation of error (POE). The simultaneous optimization of factors was conducted by desirability function. The highest desirability of 87.63% was accomplished by setting up experimental conditions as follows: 19.9°C for sample temperature, 19.3°C for ambient temperature and 240V for instrument voltage.

Changes in the rheological properties of wheat dough during short-term storage of wheat.

BACKGROUND: The aim of the present study was to investigate the ability of the small- and large-deformation fundamental rheological tests to monitor the changes during short-term post-harvest storage of wheat. RESULTS: At the end of wheat storage period, wet gluten quantity decreased, while gluten index increased in comparison to those of freshly harvested samples. The rheological properties of dough changed over the pre-defined period of storage in terms of becoming more elastic and less extensible in comparison to that of freshly harvested wheat. Visco-elastic properties of weaker flour samples changed more markedly during storage than those of stronger flours, indicating that the intensity of dough rheological changes during wheat storage might be dependent on gluten quality and were the characteristic of wheat variety. CONCLUSION: It was shown that small deformation dynamic oscillation and large deformation creep-recovery tests can be successfully employed to monitor the changes in flour quality during wheat storage and that required storage period after wheat harvesting has to be defined according to wheat variety initial rheological properties and its gluten quality.