ABSTRACT
We have investigated the pinning potential of high-quality single crystals of superconducting material CaKFe4As4 having high critical current density and very high upper critical field using both magnetization relaxation measurements and frequency-dependent AC susceptibility. Preliminary studies of the superconducting transition and of the isothermal magnetization loops confirmed the high quality of the samples, while temperature dependence of the AC susceptibility in high magnetic fields show absolutely no dependence on the cooling conditions, hence, no magnetic history. From magnetization relaxation measurements were extracted the values of the normalized pinning potential U*, which reveals a clear crossover between elastic creep and plastic creep. The extremely high values of U*, up to 1200 K around the temperature of 20 K lead to a nearly zero value of the probability of thermally-activated flux jumps at temperatures of interest for high-field applications. The values of the creep exponents in the two creep regimes resulted from the analysis of the magnetization relaxation data are in complete agreement with theoretical models. Pinning potentials were also estimated, near the critical temperature, from AC susceptibility measurements, their values being close to those resulted (at the same temperature and DC field) from the magnetization relaxation data.
ABSTRACT
The correlation in type-II superconductors between the creep rate S and the Second Magnetization Peak (SMP) phenomenon which produces an increase in Jc, as a function of the field (H), has been investigated at different temperatures by starting from the minimum in S(H) and the onset of the SMP phenomenon detected on a FeSe0.5Te0.5 sample. Then the analysis has been extended by considering the entire S(H) curves and comparing our results with those of many other superconducting materials reported in literature. In this way, we find evidence that the flux dynamic mechanisms behind the appearance of the SMP phenomenon in Jc(H) are activated at fields well below those where the critical current starts effectively to increase. Moreover, the found universal relation between the minimum in the S(H) and the SMP phenomenon in Jc(H) shows that both can be attributed to a sequential crossover between a less effective pinning (losing its effectiveness at low fields) to a more effective pinning (still acting at high fields), regardless of the type-II superconductor taken into consideration.
ABSTRACT
The measurements of DC magnetization M as a function of magnetic field (H) and time (t) have been performed in order to study the superconducting and pinning properties of a Fe(Se, Te) iron based superconductor fabricated by means of the Bridgman technique. By performing the superconducting hysteresis loops M(H) at different temperatures in the case of perpendicular and parallel field, the critical current density Jc (H) has been extracted in the framework of the Bean critical state model for both configurations. The Jc (H) curves have shown the presence of the second magnetization peak effect that causes an anomalous increase in the field dependence of the critical current density. In order to obtain the Jc anisotropy of the sample, we have performed the ratio between perpendicular and parallel critical current density values [Formula: see text] and compared its values with the literature ones. The information regarding the pinning energy U have been extracted by means of the relaxation of the irreversible magnetization M(t) in the case Hâ£â£c. In particular, performing relaxation measurements at different temperatures and magnetic fields, the temperature dependence of the pinning energy U(T) at different magnetic fields has been obtained showing an anomalous temperature scaling of the curves. The presence of a maximum in the U(T) curves suggests a pinning crossover at a given field and temperature H cr(T). The H cr(T) values have been fitted with the equation H cr(T) = H cr(0) (1 - T/T*) n whose results confirm the correlation between the elastic/plastic crossover and the end of the peak effect phenomenon.
ABSTRACT
A model has been developed to determine the effective ac magnetic response of magnetic systems, taking into account the demagnetization effects arising from the sample geometry which determine the out-of-phase components of the applied fundamental frequency and higher harmonic components. Indeed, demagnetization fields and their intermodulation can significantly affect the ac magnetic response. This approach provides a system of self-consistent linear equations relating the magnetic response to the external magnetic field by means of nonlinear magnetic susceptibility. The model is extended to the magnetic response of granular systems in terms of the contributions of the individual grains and of the whole sample in the presence of demagnetization effects of the whole sample and of the grains on a macroscopic scale. In particular, our model is applied to a granular superconducting system. The comparison between the performed numerical simulations and the experimental data shows that the demagnetization fields of the single grains and of the whole sample, and their intermodulation, are relevant if magnetic measurements are used to extract detailed information about the analyzed material.
ABSTRACT
The fabrication and characterization of superconducting and ferromagnetic heterostructures is an open field due to the fundamental interest in the physics of the coexistence of these two competing orders and their possible applications in the spintronics industry. In this paper we present structural, electrical and magnetic characterization for the single La(0.7)Ca(0.3)MnO(3) (LCMO) thin layer, La(0.7)Ca(0.3)MnO(3)/YBa(2)Cu(3)O(7-x) (LCMO/YBCO) bilayers and the LCMO/YBCO/LCMO trilayers. In particular, we show a detailed magnetic characterization of the LCMO thin films by means of low temperature magnetic force microscopy. We discuss the different dynamics of the magnetic domains observed, depending on the substrate induced strain and on the film thickness.
ABSTRACT
The evidence of the vortex glass phase has been obtained by analysing the nonlinear magnetic response of type-II superconductors. The method introduced here is based on a combined frequency dependence analysis of the real and imaginary part of the 1st and 3rd harmonics of the AC magnetic susceptibility. The analysis has been performed by taking into account both the components and the Cole-Cole plots (i.e. the imaginary part as a function of the real part). Numerical simulations have been used to identify the fingerprints of the magnetic behaviour in the vortex glass phase. These characteristics allowed the vortex glass phase to be distinguished from the other disordered phases, even those showing similar electrical properties. Finally, this method has been successfully applied to detecting the vortex glass phase in an YBCO bulk melt-textured sample.
ABSTRACT
Magnesium diboride, MgB2, has a relatively high superconducting transition temperature, placing it between the families of low- and high-temperature (copper oxide based) superconductors. Supercurrent flow in MgB2 is unhindered by grain boundaries, making it potentially attractive for technological applications in the temperature range 20-30 K. But in the bulk material, the critical current density (Jc) drops rapidly with increasing magnetic field strength. The magnitude and field dependence of the critical current are related to the presence of structural defects that can 'pin' the quantized magnetic vortices that permeate the material, and a lack of natural defects in MgB2 may be responsible for the rapid decline of Jc with increasing field strength. Here we show that modest levels of atomic disorder induced by proton irradiation enhance the pinning of vortices, thereby significantly increasing Jc at high field strengths. We anticipate that either chemical doping or mechanical processing should generate similar levels of disorder, and so achieve performance that is technologically attractive in an economically viable way.
