Temperature monitoring during radiofrequency ablation of liver: in vivo trials.

Radiofrequency ablation (RFA) is a minimally invasive procedure used to treat tumors by means of hyperthermia, mostly through percutaneous approach. The tissue temperature plays a pivotal role in the achievement of the target volume heating, while sparing the surrounding healthy tissue from thermal damage. Several techniques for thermometry during RFA are investigated, most of them based on the use of single-point measurement system (e.g., thermocouples). The measurement of temperature map is crucial for the real-time control and fine adjustment of the treatment settings, to optimize the shape and size of the ablated volume. The recent interest about fiber optic sensors and, among them, fiber Bragg gratings (FBGs) for the monitoring of thermal effects motivated further investigation. In particular, the feature of FBGs to form an array of several elements, thus to be inscribed within the same fiber, allows the use of a single probe for the multi-points monitoring of the tissue temperature during RFA. Hence, the aim of this study is the development and characterization of a needle-like probe embedding an array of three FBGs, which was tested on pig liver during in vivo trials. The needle allows a safe and easy insertion of the fiber optic within the liver. It was inserted by ultrasound guidance into the liver, and monitored the change of tissue temperature during RFA controlled by the roll-off technique. Also the measurement error induced by breathing movements of the liver was assessed (less than 3 °C). Results encourage the use of the probe in clinical settings, as well as the improvement of some features, e.g., a higher number of FBGs for performing quasi-distributed measurement.

Design and preliminary assessment of a smart textile for respiratory monitoring based on an array of Fiber Bragg Gratings.

Comfortable and easy to wear smart textiles have gained popularity for continuous respiratory monitoring. Among different emerging technologies, smart textiles based on fiber optic sensors (FOSs) have several advantages, like Magnetic Resonance (MR)-compatibility and good metrological properties. In this paper we report on the development and assessment of an MR-compatible smart textiles based on FOSs for respiratory monitoring. The system consists of six fiber Bragg grating (FBG) sensors glued on the textile to monitor six compartments of the chest wall (i.e., right and left upper thorax, right and left abdominal rib cage, and right and left abdomen). This solution allows monitoring both global respiratory parameters and each compartment volume change. The system converts thoracic movements into strain measured by the FBGs. The positioning of the FBGs was optimized by experiments performed using an optoelectronic system. The feasibility of the smart textile was assessed on 6 healthy volunteers. Experimental data were compared to the ones estimated by an optoelectronic plethysmography used as reference. Promising results were obtained on both breathing period (maximum percentage error is 1.14%), inspiratory and expiratory period, as well as on total volume change (mean percentage difference between the two systems was ~14%). The Bland-Altman analysis shows a satisfactory accuracy for the parameters under investigation. The proposed system is safe and non-invasive, MR-compatible, and allows monitoring compartmental volumes.

Monitoring of thermal treatment by linearly chirped fiber Bragg grating sensors: feasibility assessment during laser ablation on ex vivo liver.

In this work a spatially-resolved fiber optic temperature sensor has been characterized in a wide range of gradient applied on its active area (from -35 °C to +35 °C). Preliminary experiments to assess its feasibility for application in laser ablation have been performed. The sensor under test is a linearly chirped fiber Bragg grating (FBG), with 1.5 cm-length of active area. It can be considered as a chain of several FBGs, each able to sense local temperature. The sensor response to the gradient has been analyzed in terms of its spectrum width (full width at half maximum). There is a linear relationship between the full width at half maximum and the gradient, with a sensitivity of 0.0087 nm°C-1. The feasibility test using the linearly chirped FBG during laser ablation showed promising results: it is able to detect both the thermal gradients along is active area and the average temperature increment during the procedure.

Magnetic Resonance-compatible needle-like probe based on Bragg grating technology for measuring temperature during Laser Ablation.

Temperature monitoring in tissue undergone Laser Ablation (LA) may be particularly beneficial to optimize treatment outcome. Among many techniques, fiber Bragg grating (FBG) sensors show valuable characteristics for temperature monitoring in this medical scenario: good sensitivity and accuracy, and immunity from electromagnetic interferences. Their main drawback is the sensitivity to strain, which can entail measurement error for respiratory and patient movements. The aims of this work are the design, the manufacturing and the characterization of a needle-like probe which houses 4 FBGs. Three FBGs have sensitive length of 1 mm and are used as temperature sensors; one FBG with length of 10 mm is used as reference and to sense eventual strain. The optical fiber housing the FBGs was encapsulated within a needle routinely used in clinical practice to perform MRI-guided biopsy. Two materials were used for the encapsulation: i) thermal paste for the 3 FBGs used for temperature monitoring, to maximize the thermal exchange with the needle; ii) epoxy resin for the reference FBG, to improve its sensitivity to strain. The static calibration of the needle-like probe was performed to estimate the thermal sensitivity of each FBG; the step response was investigated to estimate the response time. FBGs 1 mm long have thermal sensitivity of 0.01 nm·°C(-1), whereas the reference FBG presents 0.02 nm·°C(-1). For all FBGs, the response time was in the order of 100 ms. Lastly, experiments were performed on ex vivo swine liver undergoing LA to i) evaluate the possible presence of measurement artifact, due to the direct absorption of laser light by the needle and ii) assess the feasibility of the probe in a quasi clinical scenario.

An MR-compatible force sensor based on FBG technology for biomedical application.

Fiber Bragg Grating (FBG) technology is very attractive to develop sensors for the measurement of thermal and mechanical parameters in biological applications, particularly in presence of electromagnetic interferences. This work presents the design, working principle and experimental characterization of a force sensor based on two FBGs, with the feature of being compatible with Magnetic Resonance. Two prototypes based on different designs are considered and characterized: 1) the fiber with the FBGs is encapsulated in a polydimethylsiloxane (PDMS) sheet; 2) the fiber with the FBGs is free without the employment of any polymeric layer. Results show that the prototype which adopts the polymeric sheet has a wider range of measurement (4200 mN vs 250 mN) and good linearity; although it has lower sensitivity (≈0.1 nm-N(1) vs 7 nm-N(1)). The sensor without polymeric layer is also characterized by employing a differential configuration which allows neglecting the influence of temperature. This solution improves the linearity of the sensor, on the other hand the sensitivity decreases. The resulting good metrological properties of the prototypes here tested make them attractive for the intended application and in general for force measurement during biomedical applications in presence of electromagnetic interferences.

Influence of FBG sensors length on temperature measures in laser-irradiated pancreas: theoretical and experimental evaluation.

Temperature distribution T(x,y,z,t) in tissue undergoing Laser-induced Interstitial Thermotherapy (LITT) plays a crucial role on treatment outcome. Theoretical and experimental assessment of temperature on ex vivo laser-irradiated pancreas is presented. The aim of this work is to assess the influence of thermometers dimensions on temperature measures during LITT. T(x,y,z,t) inside tissue is monitored by optical sensors, i.e., Fiber Bragg Gratings (FBGs): three FBGs with lengths of 10 mm and nine FBGs of 1 mm, at different distances (2 mm, 5 mm and 10 mm) and different quotes (0 mm, 2 mm and 4 mm) from the laser fiber tip are used. Theoretical punctual T(x,y,z,t) is averaged out on both 10 mm and 1 mm in order to compare numerical predictions with experimental data. Results demonstrate the influence of FBG length on T(x,y,z,t) measures. This phenomenon depends on the distance between sensor and applicator: it is particularly significant close to the applicator tip (2 mm) because of the high spatial T(x,y,z,t) gradient within the tissue. Both theoretical results and experimental ones show that just at a distance of 10 mm from the tip, differences between T(x,y,z,t) provided by FBGs of 10 mm and 1 mm are negligible.