Etching Kinetics of Nanodiamond Seeds in the Early Stages of CVD Diamond Growth.

We present an experimental study on the etching of detonation nanodiamond (DND) seeds during typical microwave chemical vapor deposition (MWCVD) conditions leading to ultra-thin diamond film formation, which is fundamental for many technological applications. The temporal evolution of the surface density of seeds on the Si(100) substrate has been assessed by scanning electron microscopy (SEM). The resulting kinetics have been explained in the framework of a model based on the effect of the particle size, according to the Young-Laplace equation, on both chemical potential of carbon atoms in DND and activation energy of the reaction with atomic hydrogen. The model describes the experimental kinetics of seeds' disappearance by assuming that nanodiamond particles with a size smaller than a "critical radius," r*, are etched away while those greater than r* can grow. Finally, the model allows to estimate the rate coefficients for growth and etching from the experimental kinetics.

Surface Nanotexturing of Boron-Doped Diamond Films by Ultrashort Laser Pulses.

Polycrystalline boron-doped diamond (BDD) films were surface nanotextured by femtosecond pulsed laser irradiation (100 fs duration, 800 nm wavelength, 1.44 J cm-2 single pulse fluence) to analyse the evolution of induced alterations on the surface morphology and structural properties. The aim was to identify the occurrence of laser-induced periodic surface structures (LIPSS) as a function of the number of pulses released on the unit area. Micro-Raman spectroscopy pointed out an increase in the graphite surface content of the films following the laser irradiation due to the formation of ordered carbon sites with respect to the pristine sample. SEM and AFM surface morphology studies allowed the determination of two different types of surface patterning: narrow but highly irregular ripples without a definite spatial periodicity or long-range order for irradiations with relatively low accumulated fluences (<14.4 J cm-2) and coarse but highly regular LIPSS with a spatial periodicity of approximately 630 nm ± 30 nm for higher fluences up to 230.4 J cm-2.

Frenkel-Poole Mechanism Unveils Black Diamond as Quasi-Epsilon-Near-Zero Surface.

A recent innovation in diamond technology has been the development of the "black diamond" (BD), a material with very high optical absorption generated by processing the diamond surface with a femtosecond laser. In this work, we investigate the optical behavior of the BD samples to prove a near to zero dielectric permittivity in the high electric field condition, where the Frenkel-Poole (FP) effect takes place. Zero-epsilon materials (ENZ), which represent a singularity in optical materials, are expected to lead to remarkable developments in the fields of integrated photonic devices and optical interconnections. Such a result opens the route to the development of BD-based, novel, functional photonic devices.

Charge Transport Mechanisms of Black Diamond at Cryogenic Temperatures.

Black diamond is an emerging material for solar applications. The femtosecond laser surface treatment of pristine transparent diamond allows the solar absorptance to be increased to values greater than 90% from semi-transparency conditions. In addition, the defects introduced by fs-laser treatment strongly increase the diamond surface electrical conductivity and a very-low activation energy is observed at room temperature. In this work, the investigation of electronic transport mechanisms of a fs-laser nanotextured diamond surface is reported. The charge transport was studied down to cryogenic temperatures, in the 30−300 K range. The samples show an activation energy of a few tens of meV in the highest temperature interval and for T < 50 K, the activation energy diminishes to a few meV. Moreover, thanks to fast cycles of measurement, we noticed that the black-diamond samples also seem to show a behavior close to ferromagnetic materials, suggesting electron spin influence over the transport properties. The mentioned properties open a new perspective in designing novel diamond-based biosensors and a deep knowledge of the charge-carrier transport in black diamond becomes fundamental.

LIPSS Applied to Wide Bandgap Semiconductors and Dielectrics: Assessment and Future Perspectives.

With the aim of presenting the processes governing the Laser-Induced Periodic Surface Structures (LIPSS), its main theoretical models have been reported. More emphasis is given to those suitable for clarifying the experimental structures observed on the surface of wide bandgap semiconductors (WBS) and dielectric materials. The role played by radiation surface electromagnetic waves as well as Surface Plasmon Polaritons in determining both Low and High Spatial Frequency LIPSS is briefly discussed, together with some experimental evidence. Non-conventional techniques for LIPSS formation are concisely introduced to point out the high technical possibility of enhancing the homogeneity of surface structures as well as tuning the electronic properties driven by point defects induced in WBS. Among these, double- or multiple-fs-pulse irradiations are shown to be suitable for providing further insight into the LIPSS process together with fine control on the formed surface structures. Modifications occurring by LIPSS on surfaces of WBS and dielectrics display high potentialities for their cross-cutting technological features and wide applications in which the main surface and electronic properties can be engineered. By these assessments, the employment of such nanostructured materials in innovative devices could be envisaged.

Deep-Subwavelength 2D Periodic Surface Nanostructures on Diamond by Double-Pulse Femtosecond Laser Irradiation.

Two-dimensional laser-induced periodic surface structures with a deep-subwavelength periodicity (80 nm ≈ λ/10) are obtained for the first time on diamond surfaces. The distinctive surface nanotexturing is achieved by employing a single step technique that relies on irradiation with two temporally delayed and cross-polarized femtosecond-laser pulses (100 fs duration, 800 nm wavelength, 1 kHz repetition rate) generated with a Michelson-like interferometer configuration, followed by chemical etching of surface debris. In this Letter, we demonstrate that, if the delay between two consecutive pulses is ≤2 ps, the 2D periodicity of nanostructures can be tuned by controlling the number of pulses irradiating the surface. Under scanning mode, the method is effective in treating uniformly large areas of diamond, so to induce remarkable antireflection properties able to enhance the absorptance in the visible up to 50 times and to pave the route toward the creation of metasurfaces for future diamond-based optoelectronic devices.

Femtosecond-Laser Nanostructuring of Black Diamond Films under Different Gas Environments.

Irradiation of diamond with femtosecond (fs) laser pulses in ultra-high vacuum (UHV) conditions results in the formation of surface periodic nanostructures able to strongly interact with visible and infrared light. As a result, native transparent diamond turns into a completely different material, namely "black" diamond, with outstanding absorptance properties in the solar radiation wavelength range, which can be efficiently exploited in innovative solar energy converters. Of course, even if extremely effective, the use of UHV strongly complicates the fabrication process. In this work, in order to pave the way to an easier and more cost-effective manufacturing workflow of black diamond, we demonstrate that it is possible to ensure the same optical properties as those of UHV-fabricated films by performing an fs-laser nanostructuring at ambient conditions (i.e., room temperature and atmospheric pressure) under a constant He flow, as inferred from the combined use of scanning electron microscopy, Raman spectroscopy, and spectrophotometry analysis. Conversely, if the laser treatment is performed under a compressed air flow, or a N2 flow, the optical properties of black diamond films are not comparable to those of their UHV-fabricated counterparts.

Nanostructured sp2-carbon infiltration of mesoporous silicon layers.

The preparation of composite layers made of porous silicon (PS) infiltrated with nanostructured carbon is reported. These composite layers were obtained by chemical vapor infiltration (CVI) of mesoporous silicon under process conditions normally employed to grow diamond films by Hot Filament Chemical Vapour Deposition (HFCVD). Micro-Raman spectroscopy and Field Emission Gun Scanning Electron Microscopy (FEG-SEM) techniques showed that diamond nucleation density was very low whilst sp2 carbon permeated completely, even after 1 h deposition, the thickness of the PS layers that preserved their mesoporous columnar structure.

A simple and versatile Sol-Gel method for the synthesis of functional nanocrystalline oxides.

MxOy nanometric powders (Nb2O5, In2O3, and ZrO2) have been efficiently synthesized at low temperatures with the use of simple precursors and with no acid or base catalysis or stabilizing agents. The powders have been characterized by Thermogravimetry/Differential Thermal Analysis, X-ray diffraction, and scanning electron microscopy. The oxides obtained have well-defined crystalline structures, exhibit homogeneity, and crystallite sizes ranging from 9 to 16 nm in diameter.