ABSTRACT
This study presents theoretical and experimental investigations into the electron and hole color centers in BaFBr crystals, characterizing their electronic and optical properties. Stoichiometric BaFBr crystals grown by the Steber method were used in the experiments. Radiation defects in BaFBr crystals were created by irradiation with 147 MeV 84Kr ions with up to fluences of 1010-1014 ions/cm2. The formation of electron color centers (F(F-), F2(F-), F2(Br-)) and hole aggregates was experimentally established by optical absorption spectroscopy. Performed measurements are compared with theoretical calculations. It allows us to determine the electron transition mechanisms and investigate the processes involved in photoluminescence emission in Eu-doped BaFBr materials to enhance the understanding of the fundamental electronic structure and properties of electron and hole color centers formed in BaFBr crystals.
ABSTRACT
This paper presents the results of ceramic synthesis in the field of a powerful flux of high-energy electrons on powder mixtures. The synthesis is carried out via the direct exposure of the radiation flux to a mixture with high speed (up to 10 g/s) and efficiency without the use of any methods or means for stimulation. These synthesis qualities provide the opportunity to optimize compositions and conditions in a short time while maintaining the purity of the ceramics. The possibility of synthesizing ceramics from powders of metal oxides and fluorides (MgF2, BaF2, WO3, Ga2O3, Al2O3, Y2O3, ZrO2, MgO) and complex compounds from their stoichiometric mixtures (Y3Al3O12, Y3AlxGa(5-x) O12, MgAl2O4, ZnAl2O4, MgWO4, ZnWO4, BaxMg(2-x) F4), including activators, is demonstrated. The ceramics synthesized in the field of high-energy electron flux have a structure and luminescence properties similar to those obtained by other methods, such as thermal methods. The results of studying the processes of energy transfer of the electron beam mixture, quantitative assessments of the distribution of absorbed energy, and the dissipation of this energy are presented. The optimal conditions for beam treatment of the mixture during synthesis are determined. It is shown that the efficiency of radiation synthesis of ceramics depends on the particle dispersion of the initial powders. Powders with particle sizes of 1-10 µm, uniform for the synthesis of ceramics of complex compositions, are optimal. A hypothesis is put forward that ionization processes, resulting in the radiolysis of particles and the exchange of elements in the ion-electron plasma, dominate in the formation of new structural phases during radiation synthesis.
ABSTRACT
In this work, we present the results of the structure and luminescence properties of YAG:Ce (Y3Al5O12 doped with Ce3+ ions) ceramic samples. Their synthesis was carried out by sintering samples from the initial oxide powders under the powerful action of a high-energy electron beam with an energy of 1.4 MeV and a power density of 22-25 kW/cm2. The measured diffraction patterns of the synthesized ceramics are in good agreement with the standard for YAG. Luminescence characteristics at stationary/time-resolved regimes were studied. It is shown that under the influence of a high-power electron beam on a mixture of powders, it is possible to synthesize YAG:Ce luminescent ceramics with characteristics close to the well-known YAG:Ce phosphor ceramics obtained by traditional methods of solid-state synthesis. Thus, it has been demonstrated that the technology of radiation synthesis of luminescent ceramics is very promising.
ABSTRACT
Cyan-emitting phosphors are important for near-ultraviolet (NUV) light-emitting diodes (LEDs) to gain high-quality white lighting. In the present work, a Bi3+-doped BaScO2F, R+ (R = Na, K, Rb) perovskite, which emits 506 nm cyan-green light under 360 or 415 nm excitation, is obtained via a high-temperature solid-state method for the first time. The obtained perovskite shows improved photoluminescence and thermal stability due to the charge compensation of Na+, K+, and Rb+ co-doping. Its spectral broadening is attributed to two centers Bi (1) and Bi (2), which are caused by the zone-boundary octahedral tilting due to the substitution of Bi3+ for the larger Ba2+. Employing the blend phosphors of Ba0.998ScO2F:0.001Bi3+,0.001K+ and the commercial BAM:Eu2+, YAG:Ce3+, and CaAlSiN3:Eu2+, a full-spectrum white LED device with Ra = 96 and CCT = 4434 K was fabricated with a 360 nm NUV chip. Interestingly, a novel strategy is proposed: the cyan-green Ba0.998ScO2F:0.001Bi3+,0.001K+ and orange Sr3SiO5:Eu2+ phosphors were packaged with a 415 nm NUV chip to produce the white LED with Ra = 85 and CCT = 4811 K.
ABSTRACT
The poor water resistance property of a commercial Mn4+-activated narrow-band red-emitting fluoride phosphor restricts its promising applications in high-performance white LEDs and wide-gamut displays. Herein, we develop a structural rigidity-enhancing strategy using a novel KHF2:Mn4+ precursor as a Mn source to construct a proton-containing water-resistant phosphor K2(H)TiF6:Mn4+ (KHTFM). The parasitic [HMnF6]- complexes in the interstitial site from the fall off the KHF2:Mn4+ are also transferred to the K2TiF6 host by ion exchange to form KHTFM with rigid bonding networks, improving the water resistance and thermostability of the sample. The KHTFM sample retains at least 92% of the original emission value after 180 min of water immersion, while the non-water-resistant K2TiF6:Mn4+(KTFM) phosphor maintains only 23%. Therefore, these findings not only illustrate the effect of protons on fluoride but also provide a novel insight into commercial water-resistant fluoride phosphors.
