Ionically cross-linked hyaluronic acid: wetting, lubrication, and viscoelasticity of a modified adhesion barrier gel.

Hyaluronic acid (HA), in linear or cross-linked form, is a common component of cosmetics, personal care products, combination medical products, and medical devices. In all cases, the ability of the HA solution or gel to wet surfaces and/or disrupt and lubricate interfaces is a limiting feature of its mechanism of action. We synthesized ferric ion-cross-linked networks of HA based on an adhesion barrier, varied the degree of cross-linking, and performed wetting goniometry, viscometry, and dynamic mechanical analysis. As cross-linking increases, so do contact angle, viscosity, storage modulus, and loss modulus; thus, wetting and lubrication are compromised. These findings have implications in medical device materials, such as adhesion barriers and mucosal drug delivery vehicles.

The effect of substrate material on silver nanoparticle antimicrobial efficacy.

With the advent of nanotechnology, silver nanoparticles increasingly are being used in coatings, especially in medical device applications, to capitalize on their antimicrobial properties. The attractiveness of nanoparticulate silver systems is the expected increased antimicrobial efficacy relative to their bulk counterparts, which may be attributed to an increased silver ion (Ag+) solubility, and hence availability, that arises from capillarity effects in small, nanometer-sized particles. However, a change of the material upon which the antimicrobial nanoparticulate silver is deposited (herein called "substrate") may affect the availability of Ag+ ions and the intended efficacy of the device. We utilize both theory and experiment to determine the effect of substrate on ion release from silver particles in electrochemical environments and find that substrate surface charge, chemical reactivity or affinity of the surface for Ag+ ions, and wettability of the surface all affect availability of Ag+ ions, and hence antimicrobial efficacy. It is also observed that with time of exposure to deionized water, Ag+ ion release increases to a maximum value at 5 min before decreasing to undetectable levels, which is attributed to coarsening of the nanoparticles, and which subsequently reduces the solubility and availability of Ag+ ions. This coarsening phenomenon is also predicted by the theoretical considerations and has been confirmed experimentally by transmission electron microscopy.

Microstructure and elution of tetracycline from block copolymer coatings.

A critical metrology issue for pharmaceutical industries is the application of analytical techniques for the characterization of drug delivery systems to address interrelationships between processing, structure, and drug release. In this study, cast coatings were formed from solutions of poly(styrene-b-isobutylene-b-styrene) (SIBS) and tetracycline in tetrahydrofuran (THF). These coatings were characterized by several imaging modalities, including time-of-flight secondary ion mass spectrometry (TOF-SIMS) for chemical imaging and analysis, atomic force microscopy (AFM) for determination of surface structure and morphology, and laser scanning confocal microscopy (LSCM), which was used to characterize the three-dimensional structure beneath the surface. The results showed phase separation between the drug and copolymer regions. The size of the tetracycline phase in the polymer matrix ranged from hundreds of nanometers to tens of microns, depending on coating composition. The mass of drug released was not found to be proportional to drug loading, because the size and spatial distribution of the drug phase varied with drug loading and solvent evaporation rate, which in turn affected the amount of drug released.

Osmotic cavitation of elastomeric intraocular lenses.

In recent years, traditional rigid materials have been replaced with softer elastomers in intraocular lenses to minimize the size of the required surgical incision, thereby reducing patient recuperation time. However, water-filled cavities that may impact visual acuity are found in many of these new implants. We demonstrate that the cavitation observed in vivo can occur due to an osmotic pressure difference between the aqueous solution within the cavity and the external media in which the lens is immersed. By reducing the osmolarity of the external solution from 300 to 0mM, we observe an increase in cavity volume of almost a factor of 30. Further, we have developed a model for cavity growth assuming the controlling factor is diffusion of hydrophilic molecules from the polymer matrix into the cavity. We find that the experimental observations are consistent with the model and suggest that oligomeric species generated during polymerization are responsible for the observed cavitation.

Discrimination between biothreat agents and 'near neighbor' species using a resequencing array.

Timely identification of biothreat organisms from large numbers of clinical or environmental samples in potential outbreak or attack scenario is critical for effective diagnosis and treatment. This study aims to evaluate the potential of resequencing arrays for this purpose. Albeit suboptimal, this report demonstrated that respiratory pathogen microarray version 1 can identify Bacillus anthracis, Francisella tularensis, Yersinia pestis and distinguish them from benign 'near neighbor' species in a single assay. Additionally, the sequence information can discriminate strains and possibly the sources of the strains. With further development, it is possible to use resequencing microarrays for biothreat surveillance.

Ru2(ap)4(sigma-oligo(phenyleneethynyl)) molecular wires: synthesis and electronic characterization.

Reported in this contribution are the synthesis, characterization, and charge transport properties of wire-like Ru2(ap)4(OPEn), where ap is 2-anilinopyridinate and OPE is -(CCC6H4)nSCH2CH2SiMe3 with n = 1 (1) and 2 (2). Scanning tunneling microscopy (STM) measurements of compound 2 inserted into a SAM of C11 thiol reveal that molecule 2 exhibits (i) the stochastic switching characteristic of wire molecules embedded in insulating SAMs and (ii) higher conductivity than the C11 thiol SAM. More importantly, analysis of the molecular electronic decay constant (beta) exhibits a decrease of at least 15% as compared to purely organic molecular analogues. Hence, the transport characteristics of molecules can be significantly improved for nanoscale electronics through the incorporation of a Ru2 fragment into conjugated backbone.

Ligand effects on charge transport in platinum(II) acetylides.

To investigate the electrical characteristics of organometallic complexes as molecular conductors, organometallic pi-conjugated molecules of the type trans-[PtL2(CCC6H4SAc-4)2], where L = PCy3, PBu3, PPh3, P(OEt)3, P(OPh)3, were synthesized and characterized by NMR, IR, UV, and X-ray spectroscopies. For the three complexes (L = PCy3, PPh3, and P(OEt)3) that could be measured using a cross-wire junction technique, the current-voltage (I-V) characteristics of a molecular monolayer of these complexes showed no ligand effect, despite spectroscopic evidence that electronic interaction between the phosphine ligands and the pi-system does occur. It was concluded that the tunneling efficiency across the molecule is the determining factor for conduction in this metal-molecule-metal system. It was also shown that the incorporation of a transition metal in pi-conjugated molecular wires does not adversely affect charge transport compared to all-carbon pi-conjugated molecular wires.

Effect of bond-length alternation in molecular wires.

Current-voltage (I-V) characteristics for metal-molecule-metal junctions formed from three classes of molecules measured with a simple crossed-wire molecular electronics test-bed are reported. Junction conductance as a function of molecular structure is consistent with I-V characteristics calculated from extended Hückel theory coupled with a Green's function approach, and can be understood on the basis of bond-length alternation.