Velocimetry of cathode particles in a magnetoplasmadynamic thruster discharge plasma.

With high-speed imaging, it is possible to directly observe the time-evolution of the macroscopic behavior of the discharge plasma in a magnetoplasmadynamic thruster (MPDT). By utilizing direct high-speed imaging capable of capturing many images over the course of a single discharge, the velocity of the cathode erosion particles can be measured, opening the possibility of a novel, noninvasive technique for discharge plasma flow field velocimetry. In this work, an 8 kA argon MPDT discharge is imaged at 26 173 fps utilizing a 0.9 neutral density filter. The camera is aligned with thruster centerline 4 m downstream of the thruster exit plane. By tracking visible particles appearing in the multiple images, the particle motion in the radial and azimuthal directions is directly imaged. Through the use of traditional techniques in digital particle image velocimetry, the cathode particles emanating from the discharge are measured to have a mean radial velocity of 44.6 ± 6.0 m/s with a 95% confidence interval and a statistically insignificant azimuthal velocity. The setup and analysis employed permits measurement of the particle velocity in orthogonal direction to the image sensor plane using a single camera. By combining a background removal subtraction technique and knowledge of the optical focal plane, the estimated mean axial velocity of the particles is 1.59 km/s. This investigation ends with a discussion of important factors to consider for future MPDT high-speed imaging particle velocimetry, such as frame-rate, image size, spatial resolution, optics, and data handling selections.

Enhanced diapycnal mixing by salt fingers in the thermocline of the tropical Atlantic.

Diapycnal mixing plays a significant role in the ocean's circulation and uptake of heat and carbon dioxide, but has not been quantified in salt finger-driven thermohaline staircases. We recently performed a tracer release experiment in the western tropical Atlantic staircase at approximately 400 m depth. The observed dispersion implies an effective diapycnal diffusivity for tracer and salt of 0.8 to 0.9 x 10(-4) m2/s. Temperature microstructure data interpreted in terms of a vertical production-dissipation balance yields a smaller effective diffusivity for heat of 0.45 (+/- 0.2) x 10(-4) m2/s, consistent with salt fingers and well above the mixing ascribable to mechanical turbulence.

Examination of lactococcal bacteriophage c2 DNA replication using two-dimensional agarose gel electrophoresis.

The ori locus of the prolate-headed lactococcal bacteriophage c2 supports plasmid replication in Lactococcus lactis in the absence of phage infection. To determine whether phage c2 DNA replication is initiated at the ori locus in vivo and to investigate the mechanism of phage DNA replication, replicating intermediates of phage c2 were analyzed using neutral/neutral two-dimensional agarose gel electrophoresis (2D). The 2D data revealed that c2 replicates via a theta mechanism and localized the initiation of theta replication to the ori region of the c2 genome.

Transcription analysis of the prolate-headed lactococcal bacteriophage c2.

A detailed transcription map of the prolate-headed lactococcal phage c2 has been constructed. Transcription of about one-third of the genome, encoding 22 open reading frames, began within the first 2 min of infection and produced at least 12 overlapping transcripts that persisted until lysis occurred at 30 min after initiation of infection. The remaining two-thirds of the genome, encoding 17 open reading frames, was divergently transcribed, beginning between 4 and 6 min after initiation of infection, and resulted in at least 18 overlapping transcripts that persisted until lysis. Five very strong, simultaneously active, and probably unregulated early promoters and a single positively regulated late promoter were identified. The late promoter had an extended -10 sequence, had a significant basal level of activity in the uninduced state, and was induced to high activity by a phage gene product. The complex overlapping pattern of transcripts resulted from the action of the multiple early promoters, inefficient termination of transcription, and (possibly) processing of a late precursor transcript(s). Phage proteins were not required for these processes, and the host RNA polymerase was probably used for both early and late transcription.

Genome duplication in soybean (Glycine subgenus soja).

Restriction fragment length polymorphism mapping data from nine populations (Glycine max x G. soja and G. max x G. max) of the Glycine subgenus soja genome led to the identification of many duplicated segments of the genome. Linkage groups contained up to 33 markers that were duplicated on other linkage groups. The size of homoeologous regions ranged from 1.5 to 106.4 cM, with an average size of 45.3 cM. We observed segments in the soybean genome that were present in as many as six copies with an average of 2.55 duplications per segment. The presence of nested duplications suggests that at least one of the original genomes may have undergone an additional round of tetraploidization. Tetraploidization, along with large internal duplications, accounts for the highly duplicated nature of the genome of the subgenus. Quantitative trait loci for seed protein and oil showed correspondence across homoeologous regions, suggesting that the genes or gene families contributing to seed composition have retained similar functions throughout the evolution of the chromosomes.

An origin of DNA replication from Lactococcus lactis bacteriophage c2.

An origin of DNA relication was identified in the intergenic region between the early and late gene regions of prolate lactococcal phage c2. A DNA fragment containing this origin, designated ori, was shown to direct DNA replication in Lactococcus lactis but not in Escherichia coli. A comparison of ori with the corresponding regions of other prolate phages revealed strict conservation of the nucleotide sequence in one half of this intergenic region. This conserved region alone would not support DNA replication. No open reading frames were identified in the ori fragment, suggesting that host factors alone are sufficient to initiate DNA replication at ori. A novel class of lactococcal vectors and E. coli-L. lactis shuttle vectors based on ori have been constructed.

Estimates of diapycnal mixing in the abyssal ocean.

Profiles of diapycnal eddy diffusivity to a maximum depth of 4000 meters were derived from ocean velocity and temperature microstructure data obtained in conjunction with separate experiments in the Northeast Pacific and Northeast Atlantic oceans. These profiles indicate that in the ocean interior where the internal wave field is at background intensity, the diapycnal eddy diffusivity is small (on the order of 0.1 x 10(-4) meters squared per second) and independent of depth, in apparent contradiction with large-scale budget studies. Enhanced dissipation is observed in regions of elevated internal wave energy, particularly near steeply sloping boundaries (where the eddy diffusivity estimates exceed 1 x 10(-4) meters squared per second). These results suggest that basin-averaged mixing rates may be dominated by processes occurring near the ocean boundaries.

An unusual polymorphic locus useful for tagging Rps1 resistance alleles in soybean.

The Phytophthora root and stem resistance locus Rps1 has been mapped to linkage group N of the USDA-ARS soybean molecular map, approximately 2 cM from locus A071-1. To determine if A071-1 polymorphisms exist that distinguish and tag different Rps1 alleles, germplasms containing the seven Rps1 alleles were screened with eight enzymes for pA071-detectable polymorphisms. Six enzymes revealed at least one polymorphic fragment. All six detected a polymorphism at A071-1 as determined by restriction fragment length polymorphism mapping, comparison to an EMBL3 clone containing locus A071-1, and Southern hybridization with probes specific for locus A071-1. Screening of the Rps1 donors and 24 Rps1-and 15 Rps1-containing U.S. soybean varieties showed that locus A071-1 exhibited three polymorphisms with each enzyme. The polymorphisms detected by one enyme did not always correlate with those detected by the other four, suggesting that multiple mutation events may be responsible for the different A071-1 polymorphisms. Although no combination of alleles distinguished Rps1-and Rps1-containing genotypes, polymorphism at A071-1 made it possible to distinguish five groups of soybean germplasms. Thus, the unusual polymorphism of locus A071-1 should useful for following Rps1 inheritance in many breeding programs.

Copy number and location of insertion sequences ISS1 and IS981 in lactococci and several other lactic acid bacteria.

Genomic DNA from 49 lactococcal strains was screened by Southern hybridization for the presence and relative copy number of lactococcal insertion sequence ISS1: ISS1 was found in 47 of 49 strains giving 1 to 20 hybridizing bands per strain. Southern hybridizations of undigested plasmid DNA from 17 lactococcal strains probed with ISS1 and IS981 showed that ISS1 was present on plasmids in all 17 strains, whereas IS981 was present on plasmids in 14 of the 17 strains. Both insertion sequences were present primarily on larger plasmids (> 25 kb), and some plasmids contained copies of both insertion sequences. When probed with ISS1, Southern hybridizations of DNA isolated from Lactococcus lactis ssp. lactis ML3 frozen stock culture and from isolated colonies showed that the stock culture consisted of a mixture of cells having different ISS1-hybridizing bands, indicating that stock cultures may contain cells with varying locations of ISS1 sequences. The number of copies and their widespread distribution among lactococcal strains establish that insertion sequences will contribute significantly to genotypic and phenotypic events that may affect the industrial performance and stability of lactococcal strains.

Development of a lactococcal integration vector by using IS981 and a temperature-sensitive lactococcal replication region.

A vector (pKMP10) capable of Campbell-like integration into the Lactococcus lactis subsp. lactis LM0230 chromosome via homologous recombination with chromosomal IS981 sequences was constructed from the replication region of lactococcal plasmid pSK11L, an internal fragment of IS981, and the erythromycin resistance gene and Escherichia coli replication origin of pVA891. The pSK11L replication region is temperature sensitive for maintenance in L. lactis subsp. lactis LM0230, resulting in loss of unintegrated pKMP10 during growth at greater than 37 degrees C. pKMP10 integrants made up 8 to 75% of LM0230(pKMP10) erythromycin-resistant cells following successive growth at 25 degrees C with selection, 39 degrees C without selection, and 39 degrees C with selection. pKMP10 integrants were also isolated from L. lactis subsp. lactis MG1363(pKMP10) but at a 10-fold-lower frequency (4%). No integrants were isolated form L. lactis subsp. lactis MMS368(pKMP10) (a Rec-deficient strain) or LM0230(pKMP1-E) (the corresponding plasmid lacking the IS981 fragment). Examination of 17 LM0230 integrants by Southern hybridization revealed pKMP10 integration into five different chromosomal sites. Four of the integration sites appeared to be chromosomal IS981 sequences, while one was an uncharacterized chromosomal sequence. The four IS981 integrants seemed to have pKMP10 integrated in a tandem repeat structure of undetermined length. Integrated pKMP10 was more stable (0 to 2% plasmid loss) than unintegrated pKMP10 (100% plasmid loss) when grown for 100 generations at 32 degrees C without selection.

Replication and temperature-sensitive maintenance functions of lactose plasmid pSK11L from Lactococcus lactis subsp. cremoris.

The replication region of pSK11L, the lactose plasmid of Lactococcus lactis subsp. cremoris (L. cremoris) SK11, was isolated on a 14.8-kbp PvuII fragment by shotgun cloning into an Escherichia coli vector encoding erythromycin resistance and selection for erythromycin-resistant transformants of L. lactis subsp. lactis (L. lactis) LM0230. Deletion analysis and Tn5 mutagenesis of the resulting plasmid (pKMP1) further localized the replication region to a 2.3-kbp ScaI-SpeI fragment. DNA sequence analysis of this 2.3-kbp fragment revealed a 1,155-bp open reading frame encoding the putative replication protein, Rep. The replication origin was located upstream of rep and consisted of an 11-bp imperfect direct repeat and a 22-bp sequence tandemly repeated three and one-half times. The overall organization of the pSK11L replicon was remarkably similar to that of pCI305, suggesting that pSK11L does not replicate by the rolling-circle mechanism. Like pSK11L, pKMP1 was unstable in L. lactis LM0230. Deletion analysis allowed identification of several regions which appeared to contribute to the maintenance of pKMP1 in L. lactis LM0230. pKMP1 was significantly more stable in L. cremoris EB5 than in L. lactis LM0230 at all of the temperatures compared. This stability was lost by deletion of a 3.1-kbp PvuII-XbaI fragment which had no effect on stability in L. lactis LM0230. Other regions affecting stability in L. cremoris EB5 but not in L. lactis LM0230 were also identified. Stability assays conducted at various temperatures showed that pKMP1 maintenance was temperature sensitive in both L. lactis LM0230 and L. cremoris EB5, although the plasmid was more unstable in L. lactis LM0230. The region responsible for the temperature sensitivity phenotype in L. lactis LM0230 was tentatively localized to a 1.2-kbp ClaI-HindIII fragment which was distinct from the replication region of pSK11L. Our results suggest that the closely related L. lactis and L. cremoris subspecies behave differently regarding maintenance of plasmids.

Identification, DNA sequence, and distribution of IS981, a new, high-copy-number insertion sequence in lactococci.

An insertion in the lactococcal plasmid pGBK17, which inactivated the gene(s) encoding resistance to the prolate-headed phage c2, was cloned, sequenced, and identified as a new lactococcal insertion sequence (IS). IS981 was 1,222 bp in size and contained two open reading frames, one large enough to encode a transposase. IS981 ended in imperfect inverted repeats of 26 of 40 bp and generated a 5-bp direct repeat of target DNA at the site of insertion. IS981 was present on the chromosome of Lactococcus lactis subsp. lactis LM0230 from where it transposed to pGBK17 during transformation. Twenty-three strains of lactococci examined for the presence of IS981 by Southern hybridization showed 4 to 26 copies per genome, with L. lactis subsp. cremoris strains containing the highest number of copies. Comparison of the DNA sequence and the amino acid sequence of the long open reading frame to other known sequences showed that IS981 is related to a family of IS elements that includes IS2, IS3, IS51, IS150, IS600, IS629, IS861, IS904, and ISL1.

Localization of Separate Genetic Loci for Reduced Sensitivity towards Small Isometric-Headed Bacteriophage sk1 and Prolate-Headed Bacteriophage c2 on pGBK17 from Lactococcus lactis subsp. lactis KR2.

The mechanism of reduced sensitivity to the small isometric-headed bacteriophage sk1 encoded on a 19-kilobase (kb) HpaII fragment subcloned from pKR223 of Lactococcus lactis subsp. lactis KR2 was examined. The reduced sensitivity to phage sk1 was due to a modest restriction/modification (R/M) system that was not active against prolate-headed phage c2. The genetic loci for the R/M system against sk1 and the abortive phage infection (Abi) mechanism effective against phage c2 were then localized by restriction mapping, subcloning, and deletion analysis. The restriction gene was localized to a region of a 2.7-kb EcoRV fragment and included an EcoRI site within that fragment. The modification gene was found to be physically separable from the restriction gene and was present on a 1.75-kb BstEII-XbaI fragment. The genetic locus for the Abi phenotype against phage c2 was localized to a region containing a 1.3-kb EcoRI fragment. Attempts to clone the c2 Abi mechanism independent of the sk1 R/M system were unsuccessful, suggesting that expression of the abi genes required sequences upstream of the modification gene. Some pGBK17 (vector pGB301 plus a 19-kb HpaII insert fragment) transformants exhibited the R/M system against phage sk1 but lost the Abi mechanism against phage c2. These transformants contained a 1.2- to 1.3-kb insertion in the Abi region. The data identified genetic loci on a cloned 19-kb HpaII fragment responsible for restriction activity and for modification activity against a small isometric-headed phage and for Abi activity against prolate-headed phage c2. A putative insertion element was also found to inactivate the abi gene(s).

Characterization of the genetic element coding for lactose metabolism in Lactococcus lactis subsp. lactis KP3.

The Lactococcus lactis subsp. lactis KP3 Lac genetic element was investigated. KP3 is a lactose-positive (Lac+) transconjugant which contains no detectable plasmid DNA. The KP3 Lac genetic element was self-transmissible (Tra+) and encoded a reduced bacteriophage sensitivity (Rbs+) phenotype. Matings of KP3 with a recombination-deficient (Rec-) recipient resulted in Lac+ transconjugants which were phenotypically indistinguishable from KP3 and contained a 96-MDa plasmid (pJS96). Phenotypic and physical analyses of pJS96 indicated that it was a deletion derivative of a putative pKB32::pJS88 Lac+ Tra+ cointegrate. pKB32 is the Lac plasmid and pJS88 is the Tra+ Rbs+ plasmid in L. lactis subsp. lactis 11007, the donor used in obtaining KP3. The results presented suggest that pJS96 is an episome, since it appeared to replicate both as a plasmid and as an integrated part of the chromosome. Conjugal transfer of chromosomal DNA mediated by pJS96 was not observed. Conjugal transfer of pJS96 resulted in Lac+ transconjugants containing plasmids ranging in size from 21 to 90 MDa. Only in Rec+ recipients were transconjugants isolated which appeared to contain pJS96 integrated into the host chromosome. Restriction analysis of several plasmids in the 21 to 90 MDa range suggested the deletions were due to intramolecular transposition of a transposable element on pJS96. This report suggests that a self-transmissible episome exists in KP3 and provides an explanation of how plasmids which vary in size yet encode similar phenotypes may be formed and disseminated.

Identification of a new insertion element, similar to gram-negative IS26, on the lactose plasmid of Streptococcus lactis ML3.

In Streptococcus lactis ML3, the lactose plasmid (pSK08) forms cointegrates with a conjugal plasmid (pRS01). It has been proposed that cointegration is mediated by insertion sequences (IS) present on pSK08 (D. G. Anderson and L.L. McKay, J. Bacteriol. 158:954-962, 1984). We examined the junction regions of the cointegrate pPW2 and the corresponding regions of pSK08 (donor) and pRS01 (target) and identified a new IS element on pSK08 (ISS1S) which was involved in and duplicated during formation of pPW2. ISS1S was 808 base pairs (bp) in size, had 18-bp inverted repeats (GGTTCTGTTGCAAAGTTT) at its ends, contained a single long open reading frame encoding a putative protein of 226 amino acids, and generated 8-bp direct repeats of target DNA during cointegrate formation. An iso-IS element, ISS1T, which is duplicated in some other cointegrate plasmids, was also found on pSK08. ISS1T was also 808 bp in size and was identical to ISS1S in sequence except for 4 bp, none of which altered the inverted repeats or amino acid sequence of the open reading frame. Comparison of ISS1 with gram-negative IS26 revealed strong homologies in size (820 bp), sequence of inverted repeats (GGCACTGTTGCAAA), size of direct repeats generated after cointegration (8 bp), and number, size, and amino acid sequence (44.5% identical) of the open reading of frame.