Humidity distribution affected by freely exposed water surfaces: simulations and experimental verification.

Accurate models for the water vapor flux at a water-air interface are required in various scientific, reliability and civil engineering aspects. Here, a study of humidity distribution in a container with air and freely exposed water is presented. A model predicting a spatial distribution and time evolution of relative humidity based on statistical rate theory and computational fluid dynamics is developed. In our approach we use short-term steady-state steps to simulate the slowly evolving evaporation in the system. Experiments demonstrate considerably good agreement with the computer modeling and allow one to distinguish the most important parameters for the model.

Design and capabilities of an experimental setup based on magnetron sputtering for formation and deposition of size-selected metal clusters on ultra-clean surfaces.

The design and performance of an experimental setup utilizing a magnetron sputtering source for production of beams of ionized size-selected clusters for deposition in ultra-high vacuum is described. For the case of copper cluster formation the influence of different source parameters is studied and analyzed. Size-selected clusters are deposited on substrates and the efficiency of an electrostatic quadrupole mass selector is tested. Height analysis using atomic force microscopy (AFM) demonstrates relative standard size deviations of 7%-10% for the particles of various sizes between 6 nm and 19 nm. Combined analysis by AFM and transmission electron microscopy reveals that the clusters preserve almost spherical shape after the deposition on amorphous carbon substrates. Supported nanoparticles of a few nanometres in diameter have crystalline structure with a face-centered cubic (fcc) lattice.

Cationic disorder and phase segregation in LaAlO3/SrTiO3 heterointerfaces evidenced by medium-energy ion spectroscopy.

Medium-energy ion spectroscopy (MEIS) has been used to study the depth profile and deduce the distribution of possible cationic substitutions in LaAlO3/SrTiO3 (LAO/STO) heterointerfaces. Analysis of La and Sr peaks in aligned and random MEIS spectra indicates that the surface layers of LAO on an STO substrate are not homogeneous and stoichiometric if the film thickness is less than 4 unit cell layers. This is possibly caused by a redistribution of La and Sr at the interface. Kelvin probe force microscopy reveals an inhomogeneous distribution of the surface potential in a 4 unit cell LAO film, indicating micrometer-sized regions of different compositions. Our findings provide a novel view on the microstructural origin of the electrically conductive interfaces.

Laser ablation source for formation and deposition of size-selected metal clusters.

This work describes construction of a source and optimisation of its parameters for production of cluster ion beams using material ablation by the second harmonic of a Nd:YAG laser (532 nm). The influence of different source parameters such as carrier gas pressure, laser power, delay time between gas, and laser pulses as well as nozzle configuration on the cluster formation are studied. For the current experiments the laser ablation cluster source was optimized for production of Con+ cluster ions. Clusters with n up to 150 atoms are registered by a time-of-flight mass spectrometer. Deposition of size-selected Co50+ clusters with kinetic energies in the interval of 250-4850 eV/cluster on highly ordered pyrolytic graphite is studied. At the highest impact energies the clusters are implanted. Craters and well-like structures can be seen by scanning tunneling microscopy at impact spots. A decrease in cluster kinetic energy leads to formation of bumplike structures which probably represent damaged graphite areas with incorporated Co atoms. Further decrease in the cluster impact energy to the level of 450-250 eV/cluster creates condition for so-called cluster pinning when the cluster constituents are intact but the energy transferred to the graphite is still enough to produce radiation defects to which the cluster is bound.

Conductance and polarisability of C60 films.

Thin films of C60 deposited in vacuum are studied using current-voltage (I-V) measurements and atomic force microscopy (AFM). In situ electrical measurements give an average resistivity of ca. 30 Mn cm for the as-deposited films at room temperature. The I-V dependences are found to correspond to ohmic behaviour but they have a hysteresis shape attributed to remnant polarisation due to the domain structure of the films. AFM images show a grainy surface morphology for the deposited C60. Temperature dependent measurements in the range 290-365 K provide evidence for a variable range hopping mechanism of conductance with an activation energy of 0.8-1.0 eV. With further temperature increase the C60 films restructure leading to an increase in grain size and a change of the electrical properties with I-V dependences showing Schottky barrier formation. The effect of oxygen on the conductance of the C60 films under their exposure to an ambient atmosphere is considered and discussed.

Surface entropy of rare-gas clusters.

Abundances of ArN+ and XeN+ clusters produced in a supersonic expansion source are inverted to find relative dissociation energies. The values around the shell and subshell closings at N=55, 71, and 147 differ from theoretical values derived from ground-state energies of Lennard-Jones clusters. A significant part of the difference can be accounted for by the conformational entropies of surface atoms and vacancies.